Effect of ceramic surface treatments on the bond strength of different composite resins

Abstract

This study was aimed to observe the relationship between the different surface treatments and the bond strength of both composite based adhesive cement and zirconia ceramic. Thirty-two zirconia ceramic discs were fabricated by following the instructions of manufacturer (5 x 5 x 1.5 mm). Four subgroups were obtained from the specimens according to the specified surface treatments respectively: (a) C: control groups: no treatment; (b) SB: sandblasting with 125 mu m aluminum oxide particles for 10 s; (c) SC: silica coating for 10 s; (d) Nd:YAG laser. the composite resin specimens Panavia F and Clearfil SA were introduced and polymerized to the treated bonding areas. Afterwards the specimens were stored in distilled water at 37 degrees C during 24 h, and the shear test was applied. the data were statistically analyzed by ANOVA and Duncan tests. the bond strength was stated significantly higher in silica coating/Panavia F group (23.35 MPa). the lowest bond strength was stated in control groups cemented with Clearfil SA (12.25 MPa). As a result it was determined that the bond strength has affected the both surface treatments and cement types (p < 0.001). the silica coating - treated zirconia ceramic recorded a significant increase in mean bond strength values.