The investigation on the regional nanoparticle Ag doping into MgTi0.06B2 bulk for improvement the magnetic levitation force and the bulk critical current
Göster/ Aç
Erişim
info:eu-repo/semantics/closedAccessTarih
2017Yazar
Öztürk, KemalDancer, Claire E. J.
Savaşkan, Burcu
Aksoy, Canan
Güner, Sait Barış
Badica, Petre
Aldica, Gheorghe V.
Çelik, Şükrü
Üst veri
Tüm öğe kaydını gösterKünye
Öztürk, K., Dancer, C.E.J., Savaşkan, B., Aksoy, C., Güner, S.B., Badica, P., Aldica, G. & Çelik, Ş. (2017). The investigation on the regional nanoparticle Ag doping into MgTi0.06B2 bulk for improvement the magnetic levitation force and the bulk critical current. Journal of Alloys and Compounds, 724, 427-434. https://doi.org/10.1016/j.jallcom.2017.07.065Özet
Fabrication methods are important way to improve structural and superconducting properties of MgB2 such as critical current, magnetic levitation force (MLF) and magnetic field trapping capability. Although the graded fabrication technique has been used for single-grain bulk YBCO superconductor to improve critical current and bulk superconducting properties, similar technique as regional doping has not been used for bulk MgB2, until now. in this study, nanoparticle silver doping was carried out in to the bulk MgTi0.06B2 superconductor by using in-situ solid state reaction and partial graded (regional) doping method together, to improve the radius independent uniform bulk current density and the magnetic levitation force as well as the structural properties of the MgB2 bulk superconductors. Both the J(c)(0) self-field critical current and F-p (mu H-0) pinning force density values enhanced in comparison with the inner region values, when the nanoparticle Ag doping is carried out in to the outer section of the sample. Addition to the enhancement of the structural and the micro electromagnetic properties as J(c)(0) and Fp (mu H-0), our study also focused on the improved of the bulk Jc and the radius of shielding current loop r, to improve bulk electromagnetic properties as the levitation force. It is seen that the structural properties enhanced and both the vertical levitation force and the lateral guidance force value increased with Ag doping to the outer section of MgTi0.06B2 sample. on the other hand, the increasing ratio of the lateral guidance force of 19.7% and the vertical levitation force of 10.8% of the sample with 3 wt% Ag-doped than the undoped one points out that the regional doping method to the outer section is very suitable for guidance force applications, which is important in the magnetic bearing application such as Maglev and magnetic energy storage systems. (C) 2017 Elsevier B.V. All rights reserved.