Basit öğe kaydını göster

dc.contributor.authorTomakin, Murat
dc.contributor.authorAltunbaş, M.
dc.contributor.authorBacaksz, Emin
dc.contributor.authorPolat, I.
dc.date.accessioned2020-12-19T20:11:00Z
dc.date.available2020-12-19T20:11:00Z
dc.date.issued2011
dc.identifier.citationTomakin, M., Altunbaş, M., Bacaksız, E. & Polat, İ. (2011). Preparation and characterization of new window material CdS thin films at low substrate temperature (<300 K) with vacuum deposition. Materials Science in Semiconductor Processing, 14(2), 120-127. https://doi.org/10.1016/j.mssp.2011.01.015en_US
dc.identifier.issn1369-8001
dc.identifier.urihttps://doi.org/10.1016/j.mssp.2011.01.015
dc.identifier.urihttps://hdl.handle.net/11436/3640
dc.description.abstractLow-temperature vacuum deposition instead of the commonly used vacuum deposition at high substrate temperatures has been applied to prepare new window material CdS thin films. The structural, optical and electrical properties of vacuum-evaporated CdS thin films were investigated as a function of substrate temperature (100300 K) and the post-deposition annealing temperature (at 473, 573 and 673 K). It was determined that films deposited at all substrate temperatures were polycrystalline in nature with hexagonal structure and a strong (0 0 2) texture. The AFM and SEM studies showed that the microstructures of the as-deposited films agreed with the expectations from structure zone model. X-ray diffraction studies showed that the crystallinity of the CdS films was improved on annealing. Optical spectroscopy results of the films indicated that the optical band gap value increased from 2.40 to 2.42 eV with decreased substrate temperature. Increasing the annealing temperature sharpened the band edge. The dark resistivity increased from 4.5×103 to 7.3×103 ? cm and the carrier concentration decreased from 4.7×1017 to 3.5×1015 cm-3 as the substrate temperature decreased from 300 to 100 K. © 2011 Elsevier Ltd. All rights reserved.en_US
dc.description.sponsorshipKaradeniz Teknik Üniversitesi: 2007.111.001.1en_US
dc.description.sponsorshipThis work was supported by the Research Fund of Karadeniz Technical University, Trabzon , under Contract no. 2007.111.001.1. Authors would like to thank Dr. Mustafa Akdoğan of Abant İzzet Baysal University performing the AFM measurements.en_US
dc.language.isoengen_US
dc.publisherElsevieren_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAnnealingen_US
dc.subjectCdS thin filmen_US
dc.subjectGrain sizeen_US
dc.subjectLow substrate temperatureen_US
dc.titlePreparation and characterization of new window material CdS thin films at low substrate temperature (<300 K) with vacuum depositionen_US
dc.typearticleen_US
dc.contributor.departmentRTEÜ, Fen - Edebiyat Fakültesi, Fizik Bölümüen_US
dc.contributor.institutionauthorTomakin, Murat
dc.identifier.doi10.1016/j.mssp.2011.01.015
dc.identifier.volume14en_US
dc.identifier.issue2en_US
dc.identifier.startpage120en_US
dc.identifier.endpage127en_US
dc.relation.journalMaterials Science in Semiconductor Processingen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster