Ara
Toplam kayıt 29, listelenen: 21-29
Performance evaluation of different carbide inserts in turning of newly developed Al-12Si-0.1Sr alloyLeistungsbewertung verschiedener Hartmetalleinsatze beim Drehen einer neu entwickelten Al-12Si-0.1Sr-Legierung
(Wiley, 2023)
An Al-12Si-0.1Sr alloy ingot was manufactured using a permanent mold casting technique. The microstructure and mechanical properties of this alloy were researched. Effects of different cutting conditions (cutting speed-V: ...
Admixture effects on the rheological/mechanical behavior and micro-structure evolution of alkali-activated slag backfills
(MDPI, 2023)
Recently, alkali-activated slag (AAS) has attracted extensive attention in cemented paste backfill (CPB) due to its low cost/CO2 emissions and high strength benefits. However, a comprehensive analysis of the mechanical/rheological ...
Predicting long-term impact of cementitious mine fill considering sand as a copper-tailings substitution
(Elsevier, 2023)
It is of great importance to use different materials or techniques to enhance the quality/behavior of cementitious mine fill (CMF). This leads the mining industry to evaluate new production techniques or resources that ...
Effect of isothermal treatment on mechanical and tribological properties of alloy Zn – 40% Al – 2% Cu – 2% Si
(Springer, 2023)
The effect of isothermal exposure at temperatures from 100°C to 250°C for 8 hours on the structure, mechanical and tribological properties of the Zn – 40% Al – 2% Cu – 2% Si alloy produced by chill casting is studied. The ...
Polypropylene fiber effect on flexural strength, toughness, deflection, failure mode and microanalysis of cementitious backfills under three-point bending conditions
(MDPI, 2023)
Cemented tailings backfill (CTB) is continually practiced in a large number of metallic mines for re-filling underground ore extraction areas. Re-filling these areas can boost the security of mining teams during construction. ...
Quantitative analysis of pore characteristics of nanocellulose reinforced cementitious tailings fills using 3D reconstruction of CT images
(Elsevier, 2023)
This study aims at analyzing the influence of contents and types of various nanocelluloses (e.g., CNF, CNC, and MFC) and intermediate microstructure on strength/fracture features of cementitious tailings backfill (CTB). ...
Analyzing the microstructure of cemented fills adding polypropylene-glass fibers with X-ray micro-computed tomography
(Elsevier, 2023)
Fiber reinforced cementitious tailings backfill (FRCTB) is progressively employed in mining industry due to its high strength/stiffness-to-weight ratio. However, the wide use of the FRCTB technique requires further study ...
Polypropylene fiber's effect on the features of combined cement-based tailing backfill: Micro- and macroscopic aspects
(MDPI, 2024)
In undercut-and-fill mining, backfills show weak tensile strength and poor ductility properties since they act as artificial pillars to support stope roofs. Hence, the enhancement of the stability of mining structures and ...
An experimental study on microstructural, mechanical and machinability properties of as-cast and heat-treated al-7Si-mg alloy
(Springer, 2024)
The automotive industry is constantly striving for targets for the development of lightweight materials for less fuel consumption and carbon emissions. For this purpose, lighter and higher-performance Al-Si alloys with ...