Basit öğe kaydını göster

dc.contributor.authorAslan, Erman
dc.contributor.authorÖzsaban, Mert
dc.contributor.authorKucur, Murad
dc.contributor.authorKoerbahti, Banu
dc.contributor.authorGüven, Hasan Rıza
dc.date.accessioned2023-10-30T11:46:34Z
dc.date.available2023-10-30T11:46:34Z
dc.date.issued2023en_US
dc.identifier.citationAslan, E., Özsaban, M., Kucur, M., Koerbahti, B. & Güven, H.R. (2023). LBM curved boundary treatments for pulsatile flow on convective heat transfer and friction factor in corrugated channels. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. https://doi.org/10.1177/09544062231194904en_US
dc.identifier.issn0954-4062
dc.identifier.issn2041-2983
dc.identifier.urihttps://doi.org/10.1177/09544062231194904
dc.identifier.urihttps://hdl.handle.net/11436/8601
dc.description.abstractThe present research investigates heat transfer and the flow characteristics of periodically corrugated wavy channels numerically under pulsatile flow conditions. The numerical method used here is Lattice Boltzmann Method (LBM), and the validation of the study is done by Ansys-Fluent which is finite volume based commercial Computational Fluid Dynamics (CFD) code. For modeling walls, bounce-back method, namely, staircase method and three different curved boundary treatments, which are extrapolation, Filippova-Hanel (FH) and Mei-Luo-Shy (MLS), are used. For modeling constant temperature at walls, staircase method and the same curved wall treatments are used. Corrugated channels have a sharp wavy peak, and its inclination angle is 30 degrees. Two different minimum channel heights are considered, which are 5 and 10 mm in corrugated channels. Flow regime is assumed as laminar (50 < Re < 300) and Prandtl number is kept as 0.7. Four kinds of different sinusoidal pulsatile flows are used with a combination of two different dimensionless frequencies and dimensionless amplitudes. For varying Reynolds number range, Nusselt number and friction factor are calculated. Narrow channel creates higher Nusselt number and friction factor than wide channel. At low Reynolds number, Nusselt number does not changed with pulsatile flow conditions, however at high Reynolds number cases of lower dimensionless frequency and higher dimensionless amplitude produce higher Nusselt numbers. Lower dimensionless frequency cases produce higher Nusselt number than higher dimensionless frequency cases. Pulsatile flow conditions have no effect on friction factor and for narrow and wide channel. Nusselt number prediction of FVM is close to STR and EXT for all cases of narrow channels, and close to the FH, MLS and EXT for all cases wide channel. Correlation equations for Nusselt number and friction factor are constructed by deep neural network (DNN) algorithm.en_US
dc.language.isoengen_US
dc.publisherSage Publicationsen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectLBMen_US
dc.subjectCurved boundariesen_US
dc.subjectCorrugated channelsen_US
dc.subjectPulsatile flowen_US
dc.subjectHeat transferen_US
dc.subjectFriction factoren_US
dc.subjectDeep neural networken_US
dc.titleLBM curved boundary treatments for pulsatile flow on convective heat transfer and friction factor in corrugated channelsen_US
dc.typearticleen_US
dc.contributor.departmentRTEÜ, Mühendislik ve Mimarlık Fakültesi, Makine Mühendisliği Bölümüen_US
dc.contributor.institutionauthorÖzsaban, Mert
dc.identifier.doi10.1177/09544062231194904en_US
dc.relation.journalProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Scienceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster