Yayın tarihi için DŞHF, Klinik Bilimler Bölümü Koleksiyonu listeleme
Toplam kayıt 176, listelenen: 1-20
-
A novel method for internal nasal valve reconstruction: H-graft technique
(Wiley, 2011)Objectives: The aim of this study was to determine the efficacy of a novel method for internal nasal valve reconstruction that enables lateralization of the superior segment of upper lateral cartilages (ULC) from the septum ... -
Peel strength of denture liner to PMMA and polyamide: laser versus air-abrasion
(Korean Acad Prosthodontics, 2013)PURPOSE. This study investigated the effect of laser parameters and air-abrasion on the peel strength of silicon-based soft denture liner to different denture resins. MATERIALS AND METHODS. Specimens (N=180) were prepared ... -
Bond strength of calcium silicate-based sealers to dentine dried with different techniques
(Karger, 2014)Objective: To assess the influence of various canal-drying techniques on the push-out bond strength between radicular dentine and both MTA Fillapex and iRoot SP sealers. Materials and Methods: Eighty extracted single-root ... -
Effect of surface treatments on the bond strength of soft denture lining materials to an acrylic resin denture base
(Mosby-Elsevier, 2014)Statement of problem. Adhesive failure between acrylic resin and resilient liner material is commonly encountered in clinical practice. Purpose. the purpose of this study was to evaluate the effect of different surface ... -
Effect of repair resin type and surface treatment on the repair strength of heat-polymerized denture base resin
(Mosby-Elsevier, 2014)Statement of Problem. Acrylic resin denture fracture is common in prosthodontic practice. When fractured denture bases are repaired, recurrent fractures frequently occur at the repair surface interface or adjacent areas. ... -
Investigation of the effect of different polishing techniques on the surface roughness of denture base and repair materials
(Mosby-Elsevier, 2014)Statement of problem. the rough surface of denture base materials may cause plaque accumulation and staining. Thus, the effectiveness of polishing techniques should be known. Purpose. the purpose of this study was to compare ... -
Evaluation of tooth number anomalies in a subpopulation of the North-East of Turkey
(Dental Investigations Society, 2014)Objective: The aim was to evaluate the prevalence and distribution of tooth number anomalies in a Turkish subpopulation. Materials and Methods: A population of 2722 patients (1532 females and 1190 males; mean age, 12.33 ± ... -
The effect of different drinks on tooth color after home bleaching
(Dental Investigations Society, 2014)Objective: This study evaluated the influence of coffee, tea, cola, and red wine staining on the color of teeth after home bleaching. Materials and Methods: A total of 45 samples were obtained from 45 sound maxillary central ... -
Therapeutic effects of melatonin on alveolar bone resorption after experimental periodontitis in rats: a biochemical and immunohistochemical study
(Amer Acad Periodontology, 2015)Background: the present study aims to investigate the effects of systemic melatonin administration on alveolar bone resorption in experimental periodontitis in rats. Methods: Twenty-four male Sprague-Dawley rats were divided ... -
Effects of alendronate and pamidronate on apoptosis and cell proliferation in cultured primary human gingival fibroblasts
(Sage Publications Ltd, 2015)Data arising from the recent literature directed the researchers to study on the degree and extent of bisphosphonate toxicity on oral mucosa in further detail. the aim of this study is to determine the half maximal inhibitory ... -
Effect of surface treatments on the bond strength of veneering ceramic to zirconia
(Wichtig Publ, 2015)Aim: the purpose of this study was to evaluate the effect of different surface treatments on the bond strength of veneering ceramic to zirconia. Methods: Square (15 mm x 10 mm x 2 mm) zirconia specimens (n= 18) received ... -
Investigation of the effects of storage time on the dimensional accuracy of impression materials using cone beam computed tomography
(Korean Acad Prosthodontics, 2016)PURPOSE. the storage conditions of impressions affect the dimensional accuracy of the impression materials. the aim of the study was to assess the effects of storage time on dimensional accuracy of five different impression ... -
Influences of fucoxanthin on alveolar bone resorption in induced periodontitis in rat molars
(Mdpi, 2016)The aim of this study was to evaluate the effects of systemic fucoxanthin treatment on alveolar bone resorption in rats with periodontitis. Thirty rats were divided into control, experimental periodontitis (EP), and ... -
The effect of different beverages on the color and translucency of flowable composites
(Wiley-Blackwell, 2016)This study examined the changes in color and translucency of flowable composites after immersion in different beverages. Thirty composite samples were prepared from four flowable composites (G-aenial Universal Flo, Filtek ... -
Apical transportation of ProGlider and ProTaper Next activated with different motions
(Sage Publications Ltd, 2016)Purpose: the aim of this study was to investigate the apical transportation of the ProGlider and ProTaper Next using 3 different motions (150 degrees clockwise [CW]; 0 degrees counter clockwise [CCW], 270 degrees CW-30 ... -
Inluence of toots preparation design on filling accuracy o CAD-CAM based restorations
(Wiley-Blackwell, 2016)Objective: I he purpose ofthis study was to evaluate the marginal fit o d fferent zirconia and metal frameworks and compare them with each other on different finish line configurations. Materials and Methods: 20 stainless ... -
Effects of multiple firings on the microstructure of zirconia and veneering ceramics
(Japanese Soc Dental Materials Devices, 2016)The aim of study was to evaluate the effects of multiple firings on the microstructures of zirconia and two ceramics. Vita VM9 (VMZ) and Cerabien ZR (C-Z) ceramics on a zirconia framework and zirconia without veneering ... -
Evaluation of the bond strength of different adhesive agents to a resin-modified calcium silicate material (TheraCal LC)
(Wiley-Hindawi, 2016)This study evaluated the bond strength of different adhesive agents to TheraCal LC and mineral trioxide aggregate (MTA) and examined the morphologic changes of these materials with different surface treatments. A total of ... -
Fractal properties of the trabecular pattern of the mandible in chronic renal failure
(British Inst Radiology, 2016)Objectives: the purpose of this study was to evaluate fractal analysis as a tool to quantitatively determine the mandibular trabecular bone changes in patients with chronic renal failure (CRF). Methods: in the present ... -
The effect of sandblasting, Er: YAG laser, and heat treatment on the mechanical properties of different zirconia cores
(Mary Ann Liebert, Inc, 2016)Objective: the purpose of this study was to evaluate the effect of surface and heat treatments on the mechanical properties and phase transformation of yttria-stabilized tetragonal zirconia (Y-TZP) materials. Background ...