Ara
Toplam kayıt 14, listelenen: 1-10
Cu(In,Ga)(Se,Te)(2) pentenary thin films formed by reaction of precursor layers
(Elsevier Science Sa, 2015)
Sodium doped CuIn(1 - x) Ga-x(Se(1 - y) Te-y)(2) (CIGST) thin films were grown on Mo-coated soda lime glass substrates by a two-stage technique. the effects of Te content and annealing temperature on the microstructural ...
Influence of copper composition and reaction temperature on the properties of CZTSe thin films
(Elsevier Science Sa, 2016)
In this study Cu2ZnSnSe4 (CZTSe) compound layers were grown using a two-stage technique that involved deposition of metallic precursors (Cu, Zn, and Sn) and Se in the first stage, followed by reaction of all the species ...
Processing CdS- and CdSe-containing window layers for CdTe solar cells
(Elsevier, 2021)
The influence of heat treatment steps on the characteristics of (CdS, CdSe) junction partners and on solar cell performance was studied. CdS films were obtained by chemical bath deposition, and CdSe layers were evaporated. ...
Effect of CdS and CdSe pre-treatment on interdiffusion with CdTe in CdS/CdTe and CdSe/CdTe heterostructures
(Elsevier, 2021)
High efficiency CdTe solar cell structure has the configuration of CdS/CdSe/CdTe. Depending on the deposition and post deposition techniques employed, this stack is often subjected to high temperatures, often in presence ...
Phase transformation in Cu2SnS3 (CTS) thin films through pre-treatment in sulfur atmosphere
(Springer, 2021)
In this study, Cu2SnS3 (CTS) thin films prepared by a two-step sulfurization process were characterized. Cu and Sn metallic layers were first deposited on glass substrates by sputtering and then annealed in-situ while in ...
Deposition of CdSeTe alloys using CdTe-CdSe mixed powder source material in a close-space sublimation process
(Springer, 2021)
CdSexTe1-x films were deposited using a close-space sublimation (CSS) method and CdSe + CdTe mixed powders as the source material. Composition of the source was changed to obtain films with varying x values, and the resulting ...
Effect of ultra-thin CdSexTe1−x interface layer on parameters of CdTe solar cells
(Elsevier, 2022)
Effects of an ultra-thin CdSexTe1-x junction interface layer on CdTe solar cell parameters were investigated employing a CdSexTe1-x/CdTe absorber structure. CdSexTe1-x thin films with varying composition were grown by ...
Effect of heat treating metallic constituents on the properties of Cu2ZnSnSe4 thin films formed by a two-stage process
(Elsevier Science Sa, 2017)
In this study Cu2ZnSnSe4 (CZTSe) thin films were grown by a two-stage process that involved sputter deposition of a Cu/Sn/Zn/Cu metallic stack, annealing the stack at various temperatures for 30 min, evaporation of a Se ...
Influence of pre-annealing Cu-Sn on the structural properties of CZTSe thin films grown by a two-stage process
(Elsevier Sci Ltd, 2018)
In this study CZTSe thin film were synthesized by a two-stage process that included sequential sputter deposition of Cu and Sn layers forming a Cu/Sn structure, pre-annealing the Cu/Sn structure at 200-380 degrees C for ...
Cu(In,Ga)(Se,Te)(2) films formed on metal foil substrates by a two-stage process employing electrodeposition and evaporation
(Elsevier Science Sa, 2018)
Cu(In,Ga)(Se,Te)(2) or CIGST films were grown over molybdenum coated stainless steel foil substrates using a two-stage technique. the process involved deposition of a Cu-In-Ga/Se-Te precursor stack over the Mo layer using ...