Ara
Toplam kayıt 12, listelenen: 1-10
Influence of copper composition and reaction temperature on the properties of CZTSe thin films
(Elsevier Science Sa, 2016)
In this study Cu2ZnSnSe4 (CZTSe) compound layers were grown using a two-stage technique that involved deposition of metallic precursors (Cu, Zn, and Sn) and Se in the first stage, followed by reaction of all the species ...
Phase transformation in Cu2SnS3 (CTS) thin films through pre-treatment in sulfur atmosphere
(Springer, 2021)
In this study, Cu2SnS3 (CTS) thin films prepared by a two-step sulfurization process were characterized. Cu and Sn metallic layers were first deposited on glass substrates by sputtering and then annealed in-situ while in ...
Effect of heat treating metallic constituents on the properties of Cu2ZnSnSe4 thin films formed by a two-stage process
(Elsevier Science Sa, 2017)
In this study Cu2ZnSnSe4 (CZTSe) thin films were grown by a two-stage process that involved sputter deposition of a Cu/Sn/Zn/Cu metallic stack, annealing the stack at various temperatures for 30 min, evaporation of a Se ...
Physical properties of CdS:Ga thin films synthesized by spray pyrolysis technique
(Springer, 2017)
This paper reports the investigation of physical properties of CdS:Ga thin films grown for the first time by a simple spray pyrolysis method as a function of Ga-doping level from 0 to 8 at.%. X-ray diffraction (XRD), ...
Influence of pre-annealing Cu-Sn on the structural properties of CZTSe thin films grown by a two-stage process
(Elsevier Sci Ltd, 2018)
In this study CZTSe thin film were synthesized by a two-stage process that included sequential sputter deposition of Cu and Sn layers forming a Cu/Sn structure, pre-annealing the Cu/Sn structure at 200-380 degrees C for ...
Cu(In,Ga)(Se,Te)(2) films formed on metal foil substrates by a two-stage process employing electrodeposition and evaporation
(Elsevier Science Sa, 2018)
Cu(In,Ga)(Se,Te)(2) or CIGST films were grown over molybdenum coated stainless steel foil substrates using a two-stage technique. the process involved deposition of a Cu-In-Ga/Se-Te precursor stack over the Mo layer using ...
Growth of Cu2ZnSnS4 (CZTS) thin films using short sulfurization periods
(Iop Publishing Ltd, 2019)
In this study CZTS thin films were grown by a two-stage process that involved sequential sputter deposition of metallic Cu, Zn, and Sn layers on Mo coated glass substrates followed by RTP annealing at 530 and 560 degrees ...
Growth and characterization of Cu2SnS3 (CTS), Cu2SnSe3 (CTSe), and Cu2Sn(S,Se)(3) (CTSSe) thin films using dip-coated Cu-Sn precursor
(Springer, 2019)
Ternary compounds Cu2SnS3, Cu2SnSe3 and Cu2Sn(S,Se)(3) thin films used in thin film solar cell applications were prepared at the first time by such a two-stage process that includes dip-coating of Cu-Sn precursors as ...
CZTS layers formed under sulfur-limited conditions at above atmospheric pressure
(Elsevier Sci Ltd, 2019)
In this study CZTS thin films were grown by a two-stage process that involved sequential sputter deposition of metallic Cu, Zn, and Sn layers on Mo coated glass substrates followed by RTP annealing in a sulfur atmosphere ...
Characterization of Cu(In,Ga)(Te,S)(2) thin films grown on stainless steel foil substratesIo
(IOP Publishing, 2023)
In this study, Cu(In,Ga)(Te,S)(2) (CIGTS) thin films with [Ga]/([In] +/- [Ga]) atomic ratios in the ranges of 0.22-0.28 and 0.50-0.67 were fabricated using a two-stage technique. During the first stage of the technique, ...