Search
Now showing items 1-8 of 8
Impact of CdSeTe and CdSe film deposition parameter on the properties of CdSeTe/CdTe absorber structure for solar cell applications
(Institute of Physics, 2024)
In this study, the effect of depositing CdSeTe and CdTe layers at different substrate temperatures (STs) by evaporation in vacuum on the properties of the CdSeTe/CdTe stacks was investigated. First, CdSeTe layers in stack ...
Performance assessment of oxygenated CdS films-based photodetector
(Elsevier, 2024)
dS films were grown by thermal evaporation on glass substrates. After growth process, samples were oxygenated at 400 °C at various gas pressures for 5 mins employing rapid thermal process. The produced CdS films were used ...
Improving solar cell efficiency through controlled annealing effects of TiO2 thin films
(Wiley, 2024)
In the scope of this research, the impact of thermal annealing on the electrical and optical characteristics of TiO2 thin films is investigated through empirical analysis. Varied annealing temperatures are applied during ...
An investigation on CdSeTe/CdTe stacks deposited by evaporation: Impact of Halide treatment depending on the applied surface
(Wiley, 2024)
Among the methods applied to modify the characteristics of CdSeTe/CdTe stacks, one of the most well-known and widely used procedures is the CdCl2 halide treatment. In this connection, the influence of CdCl2 on microstructural ...
Semi-conductive carbon from industrial tea waste biomass for a p-n junction
(Springer, 2024)
Some semiconducting carbonaceous material was developed from industrial tea waste biomass by catalytic pyrolysis and heteroatom doping; then, a p-n junction was realized on an n-type Si substrate. I-V characteristics of ...
Introduction of Co atoms into CdS thin films for improving photovoltaic properties
(Elsevier, 2024)
This paper represents a systematic work on the fabrication of chemical bath-grown CdS films with and without Co atoms and their photovoltaic performances in hybrid solar cells. Structural properties showed 1% Co-doping ...
Fabrication of gold thin films on cooled glass substrates
(Springer, 2024)
In this article, gold (Au) thin films were fabricated on glass substrates under vacuum conditions (4.5 x 10(-6) Torr) within a temperature range of 100-300 K, incrementing in steps of 50 K. Analyses through Field Emission ...
Improving photovoltaic characteristics of CdS-based hybrid solar cells through Mn incorporation
(Elsevier, 2024)
CdS thin films, both with and without Mn-doping, were grown via chemical bath deposition on indium tin oxide-coated glass substrates for application in hybrid solar cells. X-ray diffraction analysis revealed that Mn doping ...