Başlık için Makine Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 252, listelenen: 210-229
-
Relationships between mechanical and tribological properties of Zn-15Al-based ternary and quaternary alloys
(Carl Hanser Verlag, 2016)Five ternary Zn-15Al-(1- 5)Cu and six quaternary Zn15Al-3Cu-(0.5-3) Si alloys were prepared by permanent mold casting for this work. Their unlubricated sliding friction and wear properties were investigated at a pressure ... -
Research on anisotropy of the 7B50 super thick plate
(Elsevier, 2023)In this study, the microstructure and in-plane anisotropy (IPA) of mechanical properties along the normal direction (ND) of the 7B50 Al super thick plate are mainly studied. When adopting the same heat treatment for the ... -
A review on converting plastic wastes into clean hydrogen via gasification for better sustainability
(Wiley, 2021)This review paper focuses on converting plastic wastes into clean hydrogen via gasification for better sustainability. In this regard, various aspects of hydrogen production from plastic wastes are discussed and comparatively ... -
A review on environmental impacts from aviation sector in terms of life cycle assessment
(Inderscience Enterprises Ltd, 2020)The main objective of this paper is, in terms of LCA (life cycle assessment), to compile and discuss, environmental impacts of aircraft, gas turbine engine and components, and maintenance process and operations in the ... -
A review on thin-layer drying-curve equations
(Taylor & Francis Inc, 2014)This paper presents a comprehensive review of thin-layer drying-curve models available in the literature and their comparisons for single-layer drying applications from 2003 to 2013. in this regard, a total of 67 models ... -
Room temperature superplaticity in fine/ultrafine grained materials subjected to severe plastic deformation
(Japan Inst Metals & Materials, 2019)Achieving superplasticity at high temperatures and at very low strain rates is considered to be the most important disadvange of superplastic forming processes. Therefore, it is crucial to achieve superplastic behavior at ... -
Saturated flow boiling characteristics in single rectangular minichannels: effect of aspect ratio
(Taylor & Francis Inc, 2018)In this study, saturated flow boiling characteristics of deionized water in single rectangular minichannels are investigated experimentally. A special attention is paid to the effect of aspect ratio (channel width to depth, ... -
Solar chimney power plants for sustainable air quality management integrating photocatalysis and particulate filtration: A comprehensive review
(MDPI, 2024)Urban air pollution has become a pressing challenge in recent times, demanding innovative solutions. This review delves into the potential of Solar Chimney Power Plants (SCPPs) as a sustainable approach to mitigating air ... -
Solar chimney power plants: A review of the concepts, designs and performances
(MDPI, 2022)This research presents a comprehensive review of solar chimney power plants (SCPP) as a reliable source of renewable electricity generation. Solar chimney power plants differ from other renewable energy technologies because ... -
Solar energy sector under the influence of Covid-19 pandemic: A critical review
(2021)Different controversies arise when the world is dealing with the Covid-19 outbreak and fast solutions are produced in the field of health. However, the impact of Covid-19 on some critical sectors is perspicuous. One of the ... -
Solar salt with carbon nanotubes as a potential phase change material for high-temperature applications: Investigations on thermal properties and chemical stability
(American Chemical Society, 2023)Nano-enhanced phase change materials are highly employed for an enhanced heat-transfer process. The current work reports that the thermal properties of solar salt-based phase change materials were enhanced with carbon ... -
Sporopollenin Capsules as Biomimetic Templates for the Synthesis of Hydroxyapatite and β-TCP
(MDPI, 2024)Pollen grains, with their resilient sporopollenin exine and defined morphologies, have been explored as bio-templates for the synthesis of calcium phosphate minerals, particularly hydroxyapatite (HAp) and beta-tricalcium ... -
Stronsiyum ve stronsiyum-magnezyum katkılarının ötektiküstü Al-17Si alaşımının içyapı ve mekanik özelliklerine etkisi
(2019)Al-17Si, Al-17Si-0,1Sr ve Al-17Si-0,1Sr-0,6Mg alaşımları kokil kalıba döküm yöntemi ile üretilmiştir. Alaşımların yapısal ve mekanik özellikleri üretilen alaşım külçelerinden talaşlı imalat yöntemiyle hazırlanan numuneler ... -
Sustainability assessment of PW6000 turbofan engine: an exergetic approach
(Inderscience Enterprises Ltd, 2014)In this paper, theory, methodology and example application are developed and shown for a PW6000 high-bypass turbofan engine in terms of exergo-sustainable perspective. To obtain exergetic sustainability indicators, first, ... -
Sustainable assessment of solar hydrogen production techniques
(Pergamon-Elsevier Science Ltd, 2012)This study addresses some technical issues related to solar hydrogen production methods. in this regard, exergy-based environmental and sustainability parameters are applied to an electrolysis process for hydrogen production. ... -
Sustainable ventilation strategies in buildings: CFD research
(Elsevier, 2019)Developing technology and architectural design techniques have affected the field of architecture to a great extent. As a result, human comfort has become increasingly important in recent years. A natural ventilation cooling ... -
Systematic inspection on the interplay between MoNa-induced sodium and the formation of MoSe2 intermediate layer in CIGSe/Mo heterostructures
(Springer, 2024)The critical impact of sodium-doped molybdenum (MoNa) in shaping the MoSe2 interfacial layer, influencing the electrical properties of CIGSe/Mo heterostructures, and achieving optimal MoSe2 formation conditions, leading ... -
A systematic review of thermal insulation performance of hollow bricks as a function of hollow geometry
(Taylor & Francis Ltd., 2021)The amount of energy needed for HVAC (Heating, Ventilation and Air Conditioning) systems in the building depends on a variety of factors, and one of the most important is the conduction load through the building envelope. ... -
Temperature-dependent optical properties of GaSe layered single crystals
(Taylor & Francis Ltd, 2016)Optical properties of GaSe single crystals have been investigated using temperature-dependent transmission and room temperature reflection measurements in the wavelength range of 380-1100nm. the analysis of the absorption ...