Başlık için İnşaat Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 191, listelenen: 170-189
-
Solving the contact problem of functionally graded layers resting on a HP and pressed with a uniformly distributed load by analytical and numerical methods
(Techno-Press, 2022)The aim of this study is to examine the frictionless double receding contact problem for two functionally graded (FG) layers pressed with a uniformly distributed load and resting on a homogeneous half plane (HP) using ... -
Spatially variable effects on seismic response of the cable-stayed bridges considering local soil site conditions
(Techno-Press, 2019)In this study, stochastic responses of a cable-stayed bridge subjected to the spatially varying earthquake ground motion are investigated for variable local soil cases and wave velocities. Quincy Bay-view cable-stayed ... -
Stability analyses of submicron-boron mineral prepared by mechanical milling process in concrete roads
(Elsevier Sci Ltd, 2016)The main objective of this study is to investigate the possibility of utilizing nano/submicron sized boron mineral (colemanite) in Portland cement concrete. Colemanite was obtained from a mine in three different sizes as ... -
Stability assessment of high-steep cut slope debris on a landslide (Gumushane, NE Turkey)
(Springer Heidelberg, 2016)The objective of this study was to examine the effects on the stability of slope debris of planned slope excavations around the vicinity of Gumushane Imam-Hatip High School in NE Turkey. To assess the geotechnical properties ... -
Stability investigation of a deep shaft using different methods
(ASCE- American Society of Civil Engineers, 2021)The New Zigana Tunnel is, at 14.5 km long, the longest highway tunnel project in Turkey. In this project, it is planned to construct two service shafts to provide access to outside the tunnel and temporary ventilation. ... -
Strength analysis and optimization of alkali activated slag backfills through response surface methodology
(Frontiers Media, 2022)The significant difference in water-to-binder ratio, activator type and concentration between alkali-activated slag (AAS) paste/mortar/concrete and AAS-based cemented paste backfill (AAS-CPB) means that previous results ... -
Strength and microstructure evolution in cemented mine backfill with low and high pH pyritic tailings: Effect of mineral admixtures
(Elsevier, 2022)To properly dispose mining-induced tailings, diverse techniques including cemented paste fill (CPB) have been already employed. Indeed, tailings are manufactured by using different admixtures which are poisonous to the ... -
Strength development and microstructure characteristics of artificial concrete pillar considering fiber type and content effects
(Elsevier Sci Ltd, 2020)The artificial concrete pillar (ACP) replacement technique is a safe and reliable method to safely mine orebody pillar in room and pillar mining. in contrast to traditional ore pillar, artificial pillar has recently received ... -
Strength, acoustic, and fractal behavior of fiber reinforced cemented tailings backfill subjected to triaxial compression loads
(Elsevier, 2022)Overall, solid materials like CTB (i.e., cemented tailings backfill) give out low-level seismic signals as they are under stress in underground mining applications involving ground control, rock burst, and coal bump ... -
Study of early-age performance of cementitious backfills with alkali activated slag under internal sulfate attack
(Elsevier, 2023)The vulnerability to internal sulfate attack of calcium-rich ordinary Portland cement (OPC) and its relative high cost force mines to explore technically effective and low cost alternative binders to solidify sulfate-containing ... -
A study on the contact problem of a layer consisting of functionally graded material (FGM) in the presence of body force
(Mathematical Science Publishing, 2023)One of the most important components of the early design process for layered systems is gaining a knowledge of the behavior of materials under varied contact situations. Functionally graded materials (FGMs) have grown in ... -
Suture button fixation method used in the treatment of syndesmosis injury: A biomechanical analysis of the effect of the placement of the button on the distal tibiofibular joint in the mid-stance phase with finite elements method
(Elsevier, 2022)Purpose: The purpose of this study is to research the effect of suture button (SB) fixation, a method used at the treatment of ankle syndesmosis injury, which was applied in various angles, pretension force, and levels, ... -
Thermal insulation and mechanical properties of a specially improved insulation plaster under freezing-thawing and high-temperature conditions
(Oxford University Press, 2023)In this study, the effects of heat preservation and the resistance to environmental conditions of ready-made insulating sludge used in the interior and exterior facades of the buildings were investigated. The insulation ... -
Transition coefficients between compressive strengths of samples with different shape and size in mass concrete and use of weight maturity method in dam construction
(Ernst & Sohn, 2019)Mass concrete (MC) is widely used in dam concretes due to their large aggregate grain diameters, low cement dosage, and low hydration temperatures. Monitoring of the hydration temperature and compressive strength is an ... -
Two-dimensional modeling of flood wave propagation in residential areas after a dam break with application of diffusive and dynamic wave approaches
(Springer, 2021)In this study, a two-dimensional hydraulic routing model was applied to a sudden failure scenario for the Atasu Dam in Trabzon, Turkey. The goal was to simulate spreading and propagation of a dam break flood wave along a ... -
Understanding the mechanism of slope failure on a nearby highway tunnel route by different slope stability analysis methods: a case from NE Turkey
(Springer Heidelberg, 2016)The Arakli tunnel is located in the eastern Black Sea region where the most mass movement is observed in Turkey. Following the tunnel entrance portal excavations in basaltic tuffs on nearby the Konakonu residential area, ... -
Upstream vortices of a sluice gate: an experimental and numerical study
(IWA Publishing, 2023)This paper aims to explore the effects of a sill under a standard sluice gate on the development of the intake vortices. In total, 200 experiments were carried out. Sills with different shapes and widths were considered ... -
Use of the point load index in estimation of the strength rating for the RMR system
(Pergamon-Elsevier Science Ltd, 2015)The Rock Mass Rating (RMR) system is a worldwide reference for design applications involving estimation of rock mass properties and tunnel support. in the RMR system, Uniaxial Compressive Strength (UCS) is an important ... -
Utilization of the limit equilibrium and finite element methods for the stability analysis of the slope debris: An example of the Kalebasi District (NE Turkey)
(Pergamon-Elsevier Science Ltd, 2015)The stability of the slope debris in residential area of the Kalebasi District (Ozkurtun-Gumushane) was investigated using the Limit Equilibrium (LE) and Finite Element Shear-Strength Reduction (FE-SSR) methods. Along the ... -
Utilizing concrete pillars as an environmental mining practice in underground mines
(Elsevier Ltd, 2021)Ground control is an integral element of mine design and worker safety. The use of concrete pillars for underground mines is of paramount importance to maintaining the economic and operational security of structures. This ...