Başlık için İnşaat Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 191, listelenen: 86-105
-
Farklı tip betonarme binalar için geliştirilmiş hasar tahmin yöntemleri
(2017)Bu çalışmanın başlıca amacı; olası bir depremde meydana gelecek hasar ve kayıp olasılıklarını tahmin etmeye yarayan bir hasar tahmin metodu geliştirmektir. Bu amaçla; 11 farklı tip betonarme yapı için hasar olasılık ... -
Fiber length effect on strength properties of polypropylene fiber reinforced cemented tailings backfill specimens with different sizes
(Elsevier Sci Ltd, 2020)The strength properties of cemented tailings backfill (CTB: an engineered mix of processing tailings, hydraulic binder and mixing water) is strongly affected by its structural integrity. However, our understanding of the ... -
Finite element analysis of ratcheting on beam under bending-bending loading conditions
(Techno-Press, 2024)Ratcheting is the cyclic buildup of inelastic strain on a structure resulting from a combination of primary and secondary cyclic stress. It can lead to excessive plastic deformation, incremental collapse, or fatigue. ... -
Finite element analysis of the behavior of elliptical cracks emanating from the orthopedic cement interface in total hip prostheses
(Techno-Press, 2024)This study examines crack behavior within orthopedic cement utilized in total hip replacements through the finite element method. Its main goal is to compute stress intensity factors (SIF) near the crack tip. The analysis ... -
Finite element analysis of the femur fracture for a different total hip prosthesis (Charnley, Osteal, and Thompson)
(Techno-Press, 2023)Total hip replacement is a crucial intervention for patients with fractured hips who face challenges in natural recovery. The design of durable prostheses requires a comprehensive understanding of the natural processes ... -
Finite element analysis of the mechanical behavior of the different angle hip femoral stem
(Techno-Press, 2022)Femoral stems with proximal metaphyseal involvement are commonly used total hip replacement components with very good results. In this study, total hip arthroplasty (THA) application was analyzed using a three-dimensionally ... -
Finite element modeling of contact between an elastic layer and two elastic quarter planes
(Techno-Press, 2020)In this study, a two dimensional model of receding contact problem has been analyzed using finite element method (FEM) based software ANSYS and ABAQUS. For this aim finite element modeling of elastic layer and two homogeneous, ... -
Fire retardation, compressive strength and durability analysis of concrete reinforced with novel plasters: An experimental, computational and statistical research
(Elsevier, 2024)Concrete is an essential component of the construction industry, valued for its high compressive strength (CS) and durability. However, when exposed to extreme conditions like fire without protective structural elements, ... -
Free vibration and bending analysis of porous bi-directional FGM sandwich shell using a TSDT p-version finite element method
(Springer, 2024)Compared to the first-order shear deformation theory and other classical shell theories, the higher-order shear theory is deemed more accurate due to its superior ability to capture transverse shear effects, especially ... -
Free vibration and buckling of functionally graded porous beams using analytical, finite element, and artificial neural network methods
(Springer, 2023)In this study, an analytical solution based on the first-order shear deformation theory was performed for free vibration and buckling analysis of functionally graded porous beams (FGM-P) subjected to various boundary ... -
Geopolymerization mechanism of binder-free mine tailings by sodium silicate
(Elsevier Ltd, 2021)The geopolymerization of solid substances rich in calcium and aluminum including mine tailings by sodium silicate is mainly believed to be under the influence of alkali activation. However, mine tailings’ relative neutral ... -
Geopolymerization of soil by sodium silicate as an approach to control wind erosion
(Springer, 2021)Transportation of fugitive dust over long distances because of wind erosion is a severe environmental threat. Different approaches are experienced to control wind erosion, but durability and costs are the main drawbacks ... -
Geotechnical assessment of a slope stability problem in the Citlakkale residential area (Giresun, NE Turkey)
(Springer Heidelberg, 2017)Because of the rapidly growing population, new settlement areas are required, and finding an appropriate location is always difficult, especially in mountainous areas. in these regions, efficient use of the existing ... -
Geotechnical investigations and remediation design for failure of tunnel portal section: a case study in northern Turkey
(Science Press, 2017)Mass movements are very common problems in the eastern Black Sea region of Turkey due to its climate conditions, geological, and geomorphological characteristics. High slope angle, weathering, dense rainfalls, and anthropogenic ... -
Geotechnical studies and primary support design for a highway tunnel: a case study in Turkey
(Springer Heidelberg, 2019)The main aim of this study is to appraise the geotechnical characteristic of the rock masses and to propose the proper support design for the Cankurtaran Tunnel project situated in NE Turkey. the exhaustive engineering ... -
Goaf instability in an open pit iron mine triggered by dynamics disturbance: a large-scale similar simulation
(Taylor & Francis Ltd., 2023)The stability of concealed goafs in open-pit mines under the influence of blasting disturbances is directly related to successful mining production. Based on large-scale similar simulations, this study steadily analyses ... -
Identifcation of goaf instability under blasting disturbance using microseismic monitoring technology
(Springer, 2023)Micro-seismic (MS) technique can be used to appreciate rock failure process and severity of damage by quantifying micro-earthquakes in terms of time, location, grade, and energy release. Based on 3D laser detection and ... -
The impact of mechanochemical activation on the physicochemical properties and pozzolanic reactivity of kaolinite, muscovite and montmorillonite
(Elsevier, 2022)Partially replacing cement clinkers with activated clays is one of the most promising routes to decarbonise the cement industry and tackle the climate change crisis. This study systematically investigated the impact of ... -
An improved first-order shear deformation theory for wave propagation analysis in FG-CNTRC beams resting on a viscoelastic substrate
(World Stientific Publishing, 2024)This paper aims to analyze the wave propagation in functionally graded carbon nanotube-reinforced composite (FG-CNTRC) beams placed on a viscoelastic foundation utilizing an improved first-order shear deformation theory ... -
Improvement of the durability of concrete by substitution of raw ground colemanite
(Elsevier, 2023)This study investigated the effects of raw ground colemanite (GC) mineral on concrete strength and durability. Concrete mixtures were prepared at six replacement levels of GC (0%, 1%, 2%, 3%, 4% and 5%, by weight of cement). ...