Başlık için İnşaat Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 189, listelenen: 54-73
-
Editorial for special issue on frontiers and advances in cemented paste backfill
(Springer, 2023)... -
Editorial: Advances in the design and implementation of cementitious backfills
(Frontiers Media, 2022)Backfill plays an essential role in the most modern mining industries worldwide. It is usually applied in the cementitious form to fill underground mined-out openings (stopes and/or voids) -
Effect of aluminosilicate precursors and curing regime on physico-mechanical durability and microstructural characteristics of coral geopolymers (Cor-Geo): Cleaner production for coral islands
(Elsevier, 2023)This study investigated the mechanical, durability, microstructure, carbon footprint and cost characteristics of new-generation metakaolin-based geopolymer composites. Instead of GBFS, 25 % metakaolin was used, and 25 ... -
The effect of capillarity on chloride transport and the prediction of the accumulation region of chloride in concretes with reinforcement corrosion
(Elsevier, 2012)In this study, 20-year-old residential buildings which have reinforcement bar corrosion in their basement columns were investigated in Rize, Turkey. The reason for the occurrence of high steel corrosion in only some certain ... -
Effect of content and length of polypropylene fibers on strength and microstructure of cementitious tailings-waste rock fill
(MDPI, 2023)The mechanical strength properties of cemented tailings backfill are very important for the safe and environmentally friendly mining of mineral resources. To check the impact of polypropylene fiber on strength and ... -
The effect of daylight saving time options on electricity consumption of Turkey
(Elsevier Ltd, 2010)Most of the developed countries in the world use Daylight Saving Time (DST) as an energy conservation method. This study focuses on the effects of DST on electrical lighting in the buildings in Turkey. Turkey might adjust ... -
Effect of different abutment materials on stress distribution in peripheral bone and dental implant system
(Yildiz Technical Univ, 2020)In this study, the effect of different abutment materials on the stress distribution in bone tissue around the dental implant was investigated using ANSYS packet program based on finite element method. the study aims to ... -
Effect of height to diameter ratio on dynamic characteristics of cemented tailings backfills with fiber reinforcement through impact loading
(Elsevier, 2022)The safety and durability of underground backfilled stopes of metalliferous mines are so crucial owing to several dynamic events such as rock bursting, loads triggered by blasting, and loading conditions under stress. ... -
Effect of layer thickness on the flexural property and microstructure of 3D-printed rhomboid polymer-reinforced cemented tailing composites
(Springer, 2023)For mines with poor ore bodies and surrounding rocks, the general mining method does not allow the ore to be extracted from underground safely and efficiently. For these mines, the downward layered filling mining technique ... -
Effect of magnetic induction intensity and steel fiber rate on strength improvement of cementitious filling composites
(Elsevier, 2024)The underhand cut-fill backfill mining manner (UCFBMM) is widely employed in nonferrous metallic mines, and stability of the artificial backfill top plate directly determines the safety of operators and equipment, which ... -
Effect of mineral admixtures on flow properties of fresh cemented paste backfill: Assessment of time dependency and thixotropy
(Elsevier, 2020)Cemented paste backfill (CPB), an engineered mix consisting typically of tailings, cement and water, has become a regularly used structural material in most mines worldwide. the performance of the CPB structure is dependent ... -
The effect of occupational choice on job satisfaction and occupational accidents in the construction sector: A case study on Rize and Çorum in Turkey
(Dynamic Academy Yazılım İnşaat San. Tic. Ltd. Şti., 2021)The construction sector is a sector that employs a significant amount of employees in Turkey and appeals to many branches of work and professions. In Turkey, the construction sector ranks first in the statistics ... -
Effect of PCA on nanosized ulexite material prepared by mechanical milling
(Springer Heidelberg, 2017)Raw ulexite (U-3 mm) mineral used as a initial material was milled by using mechanical milling method, the milling time of which is from 0 to 8 h. Particle size, morphology, elemental and crystal structure measurements of ... -
Effect of the specimen length on ultrasonic P-wave velocity in some volcanic rocks and limestones
(Pergamon-Elsevier Science Ltd, 2015)Ultrasonic P-wave velocity (UPV) is commonly used in different fields such as civil, mining, geotechnical, and rock engineering. One of the significant parameters which affect the UPV of rock materials is likely to be the ... -
Effectiveness of soil-structure interaction and dynamic characteristics on cable-stayed bridges subjected to multiple support excitation
(Korean Soc Steel Construction-Kssc, 2018)The purpose of the study is to determine the effects of multiple support excitations (MSE) and soil-structure interaction (SSI) on the dynamic characteristics of cable-stayed bridges founded on pile foundation groups. in ... -
The effects of freeze-thaw cycles and block size on the use of the Gümüşhane Granitoid (Gümüşhane/Turkey) as building stone
(Springer, 2021)The present study aims to examine the usability of the Gümüşhane Granitoid as a building stone taking into consideration the short-term freeze-thaw cycles and mean block volume. A total of 180 specimens were used in the ... -
Effects of mineral additives and age on microstructure evolution and durability properties of sand-reinforced cementitious mine backfills
(Elsevier, 2022)Cementitious paste/mine backfill (CMB/CPB) is a creative way to proficiently decrease the sum of sulfidic tailings. However, considering them as minor raw material and inadequacies in their gradation, OPC (costly and ... -
Effects of the stiffness of an inclusion on the mechanical behavior of an aluminum alloy plate with a lateral notch
(Techno-Press Original language, 2024)This study delves into the interaction dynamics between lateral notches and inclusions, providing valuable insights for more effective engineering of structural components. By employing the finite element method, the ... -
Employing U-shaped 3D printed polymer to improve flexural properties of cementitious tailings backfills
(Elsevier, 2022)The roof stability of artificial structures constructed by cementitious tailings backfill (CTB) is one of the major aspects in the durability of underhand cut and fill mining method. This is because CTB's failure can ... -
Engineering geological appraisal and preliminary support design for the Salarha Tunnel, Northeast Turkey
(Springer Heidelberg, 2019)The purpose of this study is to determine the engineering geological properties of the rock masses and to recommend a convenient support design for the Salarha Tunnel located in northeast Turkey. the detailed geotechnical ...
