Yayıncı "Techno-Press" İnşaat Mühendisliği Bölümü Koleksiyonu için listeleme
Toplam kayıt 27, listelenen: 1-20
-
Analysis of the mechano-bactericidal effects of nanopatterned surfaces on implant-derived bacteria using the FEM
(Techno-Press, 2023)The killing of bacteria by mechanical forces on nanopattemed surfaces has been defined as a mechano-bactericidal effect. Inspired by nature, this method is a new-generation technology that does not cause toxic effects and ... -
Analytical and finite element solution of a receding contact problem
(Techno-Press, 2015)In this paper, a receding contact problem for an elastic layer resting on two quarter planes is considered. the layer is pressed by a stamp and distributed loads. It is assumed that the contact surfaces are frictionless ... -
Analytical solution of a contact problem and comparison with the results from FEM
(Techno-Press, 2015)This paper presents a comparative study of analytical method and finite element method (FEM) for analysis of a continuous contact problem. the problem consists of two elastic layers loaded by means of a rigid circular punch ... -
Analyzing the contact problem of a functionally graded layer resting on an elastic half plane with theory of elasticity, finite element method and multilayer perceptron
(Techno-Press, 2021)This paper presents a comparative study of analytical method, finite element method (FEM) and Multilayer Perceptron (MLP) for analysis of a contact problem. The problem consists of a functionally graded (FG) layer resting ... -
Analyzing the mechano-bactericidal effect of nano-patterned surfaces by finite element method and verification with artificial neural networks
(Techno-Press, 2023)The study investigated the effect of geometric structures of nano-patterned surfaces, such as peak sharpness, height, width, aspect ratio, and spacing, on mechano-bactericidal properties. Here, in silico models were developed ... -
Application of artificial neural networks in the analysis of the continuous contact problem
(Techno-Press, 2022)This paper investigates the artificial neural network (ANN) to predict the dimensionless parameters for contact pressures and contact lengths under the rigid punch, the initial separation loads, and the initial separation ... -
Artificial neural network calculations for a receding contact problem
(Techno-Press, 2020)This paper investigates the artificial neural network (ANN) to predict the dimensionless parameters for the maximum contact pressures and contact areas of a contact problem. Firstly, the problem is formulated and solved ... -
Combined influence of variable distribution models and boundary conditions on the thermodynamic behavior of FG sandwich plates lying on various elastic foundations
(Techno-Press, 2024)The present research investigates the thermodynamically bending behavior of FG sandwich plates, laying on the Winkler/Pasternak/Kerr foundation with various boundary conditions, subjected to harmonic thermal load varying ... -
Comparative study by the finite element method of three activities of a wearer of total hip prosthesis during the postoperative period
(Techno-Press, 2023)The postoperative period for a carrier of total hip prosthesis (THP), especially in the first months, remains the most difficult period for a patient after each operation, even if traumatologist surgeons want the relief ... -
The contact problem of the functionally graded layer resting on rigid foundation pressed via rigid punch
(Techno-Press, 2022)The solution of contact problems is extremely important as we encounter many situations involving such problems in our daily lives. One of the most important parameters effective in solving contact problems is the materials ... -
Examination of analytical and finite element solutions regarding contact of a functionally graded layer
(Techno-Press, 2020)In this study, the continuous and discontinuous contact problems of functionally graded (FG) layer resting on a rigid foundation were considered. the top of the FG layer was loaded by a distributed load. It was assumed ... -
Finite element analysis of ratcheting on beam under bending-bending loading conditions
(Techno-Press, 2024)Ratcheting is the cyclic buildup of inelastic strain on a structure resulting from a combination of primary and secondary cyclic stress. It can lead to excessive plastic deformation, incremental collapse, or fatigue. ... -
Finite element analysis of the behavior of elliptical cracks emanating from the orthopedic cement interface in total hip prostheses
(Techno-Press, 2024)This study examines crack behavior within orthopedic cement utilized in total hip replacements through the finite element method. Its main goal is to compute stress intensity factors (SIF) near the crack tip. The analysis ... -
Finite element analysis of the femur fracture for a different total hip prosthesis (Charnley, Osteal, and Thompson)
(Techno-Press, 2023)Total hip replacement is a crucial intervention for patients with fractured hips who face challenges in natural recovery. The design of durable prostheses requires a comprehensive understanding of the natural processes ... -
Finite element analysis of the mechanical behavior of the different angle hip femoral stem
(Techno-Press, 2022)Femoral stems with proximal metaphyseal involvement are commonly used total hip replacement components with very good results. In this study, total hip arthroplasty (THA) application was analyzed using a three-dimensionally ... -
Finite element modeling of contact between an elastic layer and two elastic quarter planes
(Techno-Press, 2020)In this study, a two dimensional model of receding contact problem has been analyzed using finite element method (FEM) based software ANSYS and ABAQUS. For this aim finite element modeling of elastic layer and two homogeneous, ... -
The investigation crack problem through numerical analysis
(Techno-Press, 2016)This paper presents a comparative study of finite element method (FEM) and analytical method for the plane problem of a layered composite containing an internal perpendicular crack in literature. the layered composite ... -
Investigation of continuous and discontinuous contact cases in the contact mechanics of graded materials using analytical method and FEM
(Techno-Press, 2021)The aim of this paper was to examine the continuous and discontinuous contact problems between the functionally graded (FG) layer pressed with a uniformly distributed load and homogeneous half plane using an analytical ... -
Numerical analysis of the receding contact problem of two bonded layers resting on an elastic half plane
(Techno-Press, 2019)The present study deals with the numerical analysis of the symmetric contact problem of two bonded layers resting on an elastic half plane compressed with a rigid punch. in this context, Finite Element Method (FEM) based ... -
Numerical simulation of the total hip prosthesis under static and dynamic loading (for three activities)
(Techno-Press, 2023)This study aims to simulate the mechanical behavior of the total prosthesis model of Charnley (CMK3) by the 3D finite element method and to determine the state of the stresses in the femoral components (prosthesis, cement, ...