Konu "Microstructure" için listeleme
Toplam kayıt 45, listelenen: 21-40
-
Enhancing mechanical and tribological properties of Ni3Al-15vol%TiC composite by high current pulsed electron beam irradiation
(Elsevier, 2022)Effects of high current pulsed electron beam irradiation (HCPEBI) on the surface microstructure, mechanical properties, room and high temperature tribological behavior of the Ni3Al-15vol%TiC composite were investigated. ... -
Experimental research on machinability characteristics of Al-9Si alloy: Effect of Sr and Mg additives
(Sage Publications, 2022)In this study, the effects of strontium (Sr) and magnesium (Mg) elements in certain rates added to Al-9Si alloy manufactured using permanent mold casting technique on the structural, mechanical, and machinability properties ... -
An experimental study on microstructural, mechanical and machinability properties of as-cast and heat-treated al-7Si-mg alloy
(Springer, 2024)The automotive industry is constantly striving for targets for the development of lightweight materials for less fuel consumption and carbon emissions. For this purpose, lighter and higher-performance Al-Si alloys with ... -
Formability of friction stir processed low carbon steels used in shipbuilding
(Chinese Society of Metals, 2018)The stretch formability of a low carbon steel processed by friction stir processing (FSP) was studied under biaxial loading condition applied by a miniaturized Erichsen test. One-pass FSP decreased the ferritic grain size ... -
Friction stir processing of dual phase steel: Microstructural evolution and mechanical properties
(Elsevier Science Inc, 2019)The influence of friction stir processing (FSP) on the microstructure and mechanical properties of a DP 600 steel has been studied. the microstructure evolution during the FSP has been characterized using electron back ... -
The influence of substrate temperature on the morphology, optical and electrical properties of thermal-evaporated ZnTe Thin Films
(Elsevier, 2009)The structural, morphological, optical and electrical properties of ZnTe films deposited by evaporation were investigated as a function of substrate temperature (at -123 and 27 °C) and post-deposition annealing temperature ... -
Influence of types and contents of nano cellulose materials as reinforcement on stability performance of cementitious tailings backfill
(Elsevier, 2022)This study explores the quality of cemented tailings backfill (CTB) reinforced with diverse nano cellulose materials (NCMs) such as micro-fibrillated cellulose (MFC), hydroxylated cellulose nanofiber (CNF), and cellulose ... -
Investigation of mechanical and microstructural properties of friction stir welded dual phase (DP) steel
(Iop Publishing Ltd, 2019)The application of dual phase (DP) steels has been increasing significantly in the automotive industry because of their high strength as well as good ductility, thus, cold formability. These steels are generally joined ... -
Investigation of microstructure and mechanical properties of friction stir welded dissimilar St37/St52 joints
(Iop Publishing Ltd, 2019)Although friction stir welding (FSW) has widely been applied to aluminum alloys in several industries over the past three decades, it is not yet used in industry for joining of steels. the aim of this study is to characterize ... -
Investigation of the effects of T5 and T6 heat treatments on the structural, mechanical, and tribological properties of Zn-40Al-2Cu-0.1Sr alloy
(Gazi Üniversitesi, 2024)To assess the effects of T5 and T6 heat treatments on the structural, mechanical, and tribological properties of Zn-40Al-2Cu-0.1Sr alloy several ingots were produced by the permanent mold casting. The structure and properties ... -
Mechanical properties of friction stir welded St 37 and St 44 steel joints
(Carl Hanser Verlag, 2018)In this study, the weldability of lower strength St 37 grade steel plate with a higher strength steel plate (i. e., St 44) using the friction stir welding technique has been studied. St 37 grade steel sheets are widely ... -
Mechanical, energy evolution, damage and microstructural behavior of cemented tailings-rock fill considering rock content and size effects
(Elsevier, 2024)Cemented tailings-rock fill (CTRF) is crucial for engineering intention and durability of re-filled stopes in deep underground mines. The current work examined the effects of fragment contents and sizes on the mechanical, ... -
Microstructure and mechanical properties of friction-stir welded St52 steel joints
(Springer, 2018)The aim of this work is to investigate the mechanical properties and microstructures of friction-stir welded (FSWed) St52 structural steel joints. in this study, St52 steel plates with a thickness of 4 mm were butt-welded ... -
Microstructure, mechanical properties and formability of friction stir welded dissimilar materials of IF-steel and 6061 Al alloy
(Springer, 2019)AA 6061 alloy and interstitial-free (IF) steel plates were joined by the friction stir welding (FSW) method, and the microstructure, mechanical properties, and biaxial stretch formability of the friction stir welded (FSWed) ... -
Numerical study on microscale and macroscale strength behaviors of hardening cemented paste backfill
(Elsevier, 2022)Computer aided optimization of cement-based materials proportion can accurately quantify the accompanying microstructure evolution, material composition, and the mechanical properties changes. However, no relevant research ... -
Performance evaluation of different carbide inserts in turning of newly developed Al-12Si-0.1Sr alloyLeistungsbewertung verschiedener Hartmetalleinsatze beim Drehen einer neu entwickelten Al-12Si-0.1Sr-Legierung
(Wiley, 2023)An Al-12Si-0.1Sr alloy ingot was manufactured using a permanent mold casting technique. The microstructure and mechanical properties of this alloy were researched. Effects of different cutting conditions (cutting speed-V: ... -
Physico-chemical and micro-structural behavior of cemented mine backfill: Effect of pH in dam tailings
(Elsevier, 2022)The tailings created during ore processing have been a serious problem for mining companies and environment since it is a challenging task to effectively manage these highly voluminous/dangerous tailings. Therefore, several ... -
Polypropylene fiber effect on flexural strength, toughness, deflection, failure mode and microanalysis of cementitious backfills under three-point bending conditions
(MDPI, 2023)Cemented tailings backfill (CTB) is continually practiced in a large number of metallic mines for re-filling underground ore extraction areas. Re-filling these areas can boost the security of mining teams during construction. ... -
Polypropylene fiber's effect on the features of combined cement-based tailing backfill: Micro- and macroscopic aspects
(MDPI, 2024)In undercut-and-fill mining, backfills show weak tensile strength and poor ductility properties since they act as artificial pillars to support stope roofs. Hence, the enhancement of the stability of mining structures and ... -
Predicting long-term impact of cementitious mine fill considering sand as a copper-tailings substitution
(Elsevier, 2023)It is of great importance to use different materials or techniques to enhance the quality/behavior of cementitious mine fill (CMF). This leads the mining industry to evaluate new production techniques or resources that ...