Yayıncı "Techno-Press" Scopus İndeksli Yayınlar Koleksiyonu için listeleme
Toplam kayıt 21, listelenen: 1-20
-
Analytical and finite element solution of a receding contact problem
(Techno-Press, 2015)In this paper, a receding contact problem for an elastic layer resting on two quarter planes is considered. the layer is pressed by a stamp and distributed loads. It is assumed that the contact surfaces are frictionless ... -
Analytical solution of a contact problem and comparison with the results from FEM
(Techno-Press, 2015)This paper presents a comparative study of analytical method and finite element method (FEM) for analysis of a continuous contact problem. the problem consists of two elastic layers loaded by means of a rigid circular punch ... -
Analyzing the contact problem of a functionally graded layer resting on an elastic half plane with theory of elasticity, finite element method and multilayer perceptron
(Techno-Press, 2021)This paper presents a comparative study of analytical method, finite element method (FEM) and Multilayer Perceptron (MLP) for analysis of a contact problem. The problem consists of a functionally graded (FG) layer resting ... -
Analyzing the mechano-bactericidal effect of nano-patterned surfaces by finite element method and verification with artificial neural networks
(Techno-Press, 2023)The study investigated the effect of geometric structures of nano-patterned surfaces, such as peak sharpness, height, width, aspect ratio, and spacing, on mechano-bactericidal properties. Here, in silico models were developed ... -
Application of artificial neural networks in the analysis of the continuous contact problem
(Techno-Press, 2022)This paper investigates the artificial neural network (ANN) to predict the dimensionless parameters for contact pressures and contact lengths under the rigid punch, the initial separation loads, and the initial separation ... -
Artificial neural network calculations for a receding contact problem
(Techno-Press, 2020)This paper investigates the artificial neural network (ANN) to predict the dimensionless parameters for the maximum contact pressures and contact areas of a contact problem. Firstly, the problem is formulated and solved ... -
Combined influence of variable distribution models and boundary conditions on the thermodynamic behavior of FG sandwich plates lying on various elastic foundations
(Techno-Press, 2024)The present research investigates the thermodynamically bending behavior of FG sandwich plates, laying on the Winkler/Pasternak/Kerr foundation with various boundary conditions, subjected to harmonic thermal load varying ... -
Comparative study by the finite element method of three activities of a wearer of total hip prosthesis during the postoperative period
(Techno-Press, 2023)The postoperative period for a carrier of total hip prosthesis (THP), especially in the first months, remains the most difficult period for a patient after each operation, even if traumatologist surgeons want the relief ... -
The contact problem of the functionally graded layer resting on rigid foundation pressed via rigid punch
(Techno-Press, 2022)The solution of contact problems is extremely important as we encounter many situations involving such problems in our daily lives. One of the most important parameters effective in solving contact problems is the materials ... -
Effect of mineralogical composition of clinoptilolite-bearing tuffs on their performance as a natural pozzolan in cementitious systems
(Techno-Press, 2021)In this study, pozzolanic reactivity and strength activity of zeolitic tuffs containing similar amount of zeolitic phase (clinoptilolite) and different types and amounts of impurities were examined in order to understand ... -
Finite element analysis of ratcheting on beam under bending-bending loading conditions
(Techno-Press, 2024)Ratcheting is the cyclic buildup of inelastic strain on a structure resulting from a combination of primary and secondary cyclic stress. It can lead to excessive plastic deformation, incremental collapse, or fatigue. ... -
The investigation crack problem through numerical analysis
(Techno-Press, 2016)This paper presents a comparative study of finite element method (FEM) and analytical method for the plane problem of a layered composite containing an internal perpendicular crack in literature. the layered composite ... -
Investigation of continuous and discontinuous contact cases in the contact mechanics of graded materials using analytical method and FEM
(Techno-Press, 2021)The aim of this paper was to examine the continuous and discontinuous contact problems between the functionally graded (FG) layer pressed with a uniformly distributed load and homogeneous half plane using an analytical ... -
Numerical analysis of the receding contact problem of two bonded layers resting on an elastic half plane
(Techno-Press, 2019)The present study deals with the numerical analysis of the symmetric contact problem of two bonded layers resting on an elastic half plane compressed with a rigid punch. in this context, Finite Element Method (FEM) based ... -
Numerical simulation of the total hip prosthesis under static and dynamic loading (for three activities)
(Techno-Press, 2023)This study aims to simulate the mechanical behavior of the total prosthesis model of Charnley (CMK3) by the 3D finite element method and to determine the state of the stresses in the femoral components (prosthesis, cement, ... -
Pozzolanic properties of trachyte and rhyolite and their effects on alkali-silica reaction
(Techno-Press, 2021)The alkali-silica reaction (ASR) is a highly complex chemical reaction which causes damage to concrete and thus adversely affects the durability and service life. Significant damage can occur in concrete structures due to ... -
Research of the crack problem of a functionally graded layer
(Techno-Press, 2024)In this study, the two-dimensional crack problem was investigated by using the finite element method (FEM)based ANSYS package program and the artificial neural network (ANN)-based multilayer perceptron (MLP) method. For ... -
Research of the impact of material and flow properties on fluid-structure interaction in cage systems
(Techno-Press, 2023)This paper investigates the mechanical behavior of full-scale offshore fish cages under hydrodynamic loads. To simulate different cases, different materials were used in the fish cage and analyzed under different flow ... -
Simulate of edge and an internal crack problem and estimation of stress intensity factor through finite element method
(Techno-Press, 2022)In this study, the elastic plane problem of a layered composite containing an internal or edge crack perpendicular to its boundaries in its lower layer is examined using numerical analysis. The layered composite consists ... -
Spatially variable effects on seismic response of the cable-stayed bridges considering local soil site conditions
(Techno-Press, 2019)In this study, stochastic responses of a cable-stayed bridge subjected to the spatially varying earthquake ground motion are investigated for variable local soil cases and wave velocities. Quincy Bay-view cable-stayed ...