Başlık için Mühendislik Fakültesi listeleme
Toplam kayıt 847, listelenen: 180-199
-
Drug repositioning approach for the treatment of ankylosing spondylitıs
(Ankara University, 2022)Objective: In this study, it was aimed to determine an FDA-approved molecule that inhibits the IL-17 receptor, which is an important target for the prevention of inflammation in Ankylosing Spondylitis (AS), using the ... -
Dry cutting: A sustainable machining technology
(Elsevier, 2021)Conventional cutting fluids with flood cooling are used to reduce the heat generation during machining but at the cost of environmental degradation. The hydrocarbon-based conventional cutting fluids are harmful to the ... -
The durability of high-strength concrete containing waste tire steel fiber and Ccal fly ash
(Hindawi, 2021)The demands for high-strength concrete (HSC) have been increasing rapidly in the construction industry due to the requirements of thin and durable structural elements. HSC is highly brittle. Therefore, to augment its ... -
Düşük dolum oranında ikili karışımlarla yüklü üniform olmayan atımlı ısı borusunun deneysel incelenmesi
(Düzce Üniversitesi, 2021)Bu çalışmada, düşük bir dolum oranında ikili karışımlarla yüklü, üniform olmayan kanal profiline sahip düz plakalı kapalı döngülü atımlı bir ısı borusunun ısıl performansı ve akış davranışı deneysel olarak incelenmiştir ... -
Dynamic instability behaviour prediction of curved shell composite structure using different higher-order theories
(Springer, 2024)Purpose: This research paper explores the dynamic instability behaviour of laminated curved shell composite structures under in-plane loading conditions. Methods: Two higher-order theories (nine and ten degrees of freedom ... -
Dynamo script and a BIM-based process for measuring embodied carbon in buildings during the design phase
(Oxford University Press, 2023)In recent years, worldwide efforts have been made towards reducing energy use and emissions, which have a variety of impacts such as contributing to climate change. Hence, environmental analysis in the construction sector ... -
Early Cambrian S-type granites in the Sakarya Zone, NE Turkey: A record for transition from subduction to post-collisional extension deduced from U-Pb zircon age and Nd-Hf isotopes
(Elsevier, 2022)Cadomian realms have recently received much attention in the Alpine-Mediterranean orogenic belts, with discontinuous outcrops extending from the Alps to the Istanbul Zone, Menderes Massif, Taurides in Turkey and Iran as ... -
Early Cambrian S-type granites in the Sakarya Zone, NE Turkey: A record for transition from subduction to post-collisional extension deduced from U[sbnd]Pb zircon age and Nd[sbnd]Hf isotopes
(Elsevier, 2022)Cadomian realms have recently received much attention in the Alpine–Mediterranean orogenic belts, with discontinuous outcrops extending from the Alps to the İstanbul Zone, Menderes Massif, Taurides in Turkey and Iran as ... -
Editorial for special issue on frontiers and advances in cemented paste backfill
(Springer, 2023)... -
Editorial: Advances in the design and implementation of cementitious backfills
(Frontiers Media, 2022)Backfill plays an essential role in the most modern mining industries worldwide. It is usually applied in the cementitious form to fill underground mined-out openings (stopes and/or voids) -
Efects of Covid‑19 outbreak on environment and renewable energy sector
(Springer, 2020)Many articles have been written in the medical feld related to the Covid-19 outbreak that has surrounded the World and killed many people. However, its environmental and energy impacts have not been sufciently studied. ... -
Effect of 3D printed skeleton shapes on strength behavior, stress evolution and microstructural response of cement-based tailings backfills
(Elsevier, 2024)The inherent brittle behavior of cement-based tail backfill (CTB) poses some challenges that can significantly impact the safety and effectiveness of underground mining operations. Due to its propensity for abrupt and ... -
Effect of a new type staggered pin fin configuration on flow boiling characteristics of micro-heat sinks
(Springer, 2023)Flow boiling in micro-pin fn structured heat sinks is an up-to-date thermal management technique. However, due to microsized fow passages, bubble blockage is a problem for this type of heat sinks, too. In addition, mixing ... -
The effect of ABS fraction on the fatigue behavior of PMMA/ABS polymer blends
(Elsevier, 2022)This paper aims to examine the fatigue behavior of the Poly(methyl methacrylate)/ Acrylonitrile-butadiene-styrene (PMMA/ABS) polymer blends by means of experimental studies. For the material characterization of the blends, ... -
Effect of air change rate on particle dispersion from inlet opening under varying particle source strengths
(Taylor and Francis Ltd., 2020)In this study, effect of air change rate (air change per hour–ACH) on indoor particle dispersion and deposition in a ventilated room is investigated. A reduced-scale model is designed to conduct experiments. Numerical ... -
Effect of air exhaust location on surgical site particle distribution in an operating room
(Tsinghua Univ Press, 2020)This study investigates effect of exhaust outlet location on airflow and particle distribution in an operating room with laminar ventilation system (LAF) via computational fluid dynamics (CFD). Four different exhaust opening ... -
Effect of air pressure on nanofiber production in solution blowing method
(Gazi Univ, Fac Engineering Architecture, 2020)In this study, effect of air pressure on nanofiber diameter and morphology was studied for solution blowing technique. A computational fluid dynamics (CFD) analysis was realized via ANSYS (R) Fluent software, and the results ... -
Effect of aluminosilicate precursors and curing regime on physico-mechanical durability and microstructural characteristics of coral geopolymers (Cor-Geo): Cleaner production for coral islands
(Elsevier, 2023)This study investigated the mechanical, durability, microstructure, carbon footprint and cost characteristics of new-generation metakaolin-based geopolymer composites. Instead of GBFS, 25 % metakaolin was used, and 25 ... -
Effect of annealing temperature on K-shell X-ray fluorescence parameters of zinc oxide thin films prepared by the sol-gel method
(Taylor & Francis Inc, 2019)Zinc oxide thin films were grown on a glass substrate by a sol-gel process using a spin-coating technique. the obtained thin films were annealed between 350 degrees C and 550 degrees C in 50 degrees C steps and were then ...
