Başlık için Mühendislik Fakültesi listeleme
Toplam kayıt 847, listelenen: 333-352
-
Experimental investigation of coaxial impinging air jets
(Pergamon-Elsevier Science Ltd, 2018)This study experimentally investigates hydrodynamical and thermal characteristics of coaxial confined impinging turbulent air jets. Various values of the dimensionless nozzle-to-plate distances and dimensionless flowrate ... -
Experimental investigation of flow boiling in single minichannels with low mass velocities
(Pergamon-Elsevier Science Ltd, 2018)Flow boiling characteristics in a single minichannel with the aspect ratio of 2 (1.8 mm width and 0.9 mm height) are studied experimentally. Experiments are conducted for different values of the wall heat flux (in the range ... -
Experimental investigation of heat transfer characteristics and wall pressure distribution of swirling coaxial confined impinging air jets
(Pergamon-Elsevier Science Ltd, 2018)In the present study, swirling coaxial confined impinging turbulent air jets issuing from a novel designed nozzle is studied experimentally. Heat transfer characteristics and pressure distribution on the impingement plate ... -
Experimental performance assessment of a novel insulation plaster as an energy-efficient retrofit solution for external walls: A key building material towards low/zero carbon buildings
(Elsevier, 2023)Thermal insulation plasters have become the focus of attention in the building sector. Among the most important reasons for this is the high thermal energy losses of the buildings. Since conventional briquettes used in ... -
Experimental research on machinability characteristics of Al-9Si alloy: Effect of Sr and Mg additives
(Sage Publications, 2022)In this study, the effects of strontium (Sr) and magnesium (Mg) elements in certain rates added to Al-9Si alloy manufactured using permanent mold casting technique on the structural, mechanical, and machinability properties ... -
Experimental studies and comprehensive computational investigations on composites-based phase change material for battery thermal management systems in electric vehicles
(Elsevier, 2024)Battery Thermal Management System plays a significant role in maintaining the health of the batteries for the long run. Active-based cooling technologies, due to the lesser thermal conductivity of air and parasitic losses, ... -
Experimental studies of latent heat storage based solar air heater for space heating: A comparative analysis
(Elsevier, 2023)There are numerous applications of solar energy technology, among which an air heating system is commonly used for space heating, wood seasoning, industrial drying, etc. Previous research focuses on the bulk usage of ... -
Experimental study for in vitro prostate cancer treatment with microwave ablation and pulsed electromagnetic field
(Taylor & Francis Inc., 2024)This paper presents the findings of a comprehensive study exploring the synergistic effects arising from the combination of microwave ablation and pulsed electromagnetic field (PEMF) therapy on prostate cancer cells. The ... -
Experimental study of single-phase fluid flow and heat transfer characteristics in rectangular microchannels
(2018)In this study, single-phase laminar flow of deionized water through microchannel heat sinks is investigated experimentally. Heat sinks including twenty-nine parallel rectangular channels have been used as the test samples. ... -
Experimental study on machinability of pre-hardened Toolox 44 and Nimax mould steels
(Gazi Üniversitesi Mühendislik Mimarlık Fakültesi, 2021)In this study, the machinability of Nimax and Toolox 44 materials, which are among the mould steels was investigated experimentally. Cutting experiments were carried out with PVD-AlCrN coated carbide end mill using three ... -
An experimental study on microstructural, mechanical and machinability properties of as-cast and heat-treated al-7Si-mg alloy
(Springer, 2024)The automotive industry is constantly striving for targets for the development of lightweight materials for less fuel consumption and carbon emissions. For this purpose, lighter and higher-performance Al-Si alloys with ... -
Exploring the link between ultrasonic and strength behavior of cementitious mine backfill by considering pore structure
(Elsevier, 2023)Understanding the porosity/pore linkage and strength properties of cementitious mine backfill (CMB) is essential for the design of underground mining filling. Adoption of new production techniques in parallel with the ... -
Exploring the sputtering conditions in ZnO thin film for triboelectric nanogenerator electrode
(Wiley, 2022)The new field of applications for triboelectric materials is based on the combination of high physical durability and charge properties of ZnO semi-conductor thin films, which have been explored in this work. ZnO films are ... -
Extended 2-D magnetic field modeling of linear motor to investigate the magnetic force parameters of high-speed superconducting maglev
(IEEE, 2023)A 2-D numerical finite-element model of a linear synchronous motor (LSM) is extended based on the magnetic field and moving mesh properties to investigate the magnetic flux and magnetic force characteristics of the high-speed ... -
Extensive analysis of a reinvigorated solar water heating system using low-density polyethylene glazing
(MDPI, 2023)Solar energy is one of the most promising forms of alternative energy because it has no adverse effects on the environment and is entirely free. Converting solar energy into thermal energy is the most common and straightforward ... -
Extraction of theoretical bit and symbol error rates of dual carrier modulation with QPSK
(Ieee, 2019)Dual carrier modulation (DCM) improves transmission performance in wireless communication channels by using it with orthogonal frequency-division multiplexing (OFDM). in the literature, DCM is proposed to use in ultra-wideband ... -
Fabrication and characterization of Al/Cu2ZnSnS4/n-Si/Al heterojunction photodiodes
(Wiley-V C H Verlag Gmbh, 2014)Cu2ZnSnS4 (CZTS) thin film has been synthesized by a sol-gel spin-coating technique on the n-Si substrate to fabricate heterojunction photodiodes. An X-ray diffraction study has shown that the film is polycrystalline with ... -
Fabrication and characterization of Au/n-ZnO/p-Si/Al sandwich device with Sol-gel spin coating method
(Springer, 2019)ZnO thin films with the n-type properties were obtained on the p-Si substrates for multi-layered sandwich device depositing by sol-gel method. Au and Al were conducted on two side of hetero-junction by PVD technique. From ... -
Fabrication of gold thin films on cooled glass substrates
(Springer, 2024)In this article, gold (Au) thin films were fabricated on glass substrates under vacuum conditions (4.5 x 10(-6) Torr) within a temperature range of 100-300 K, incrementing in steps of 50 K. Analyses through Field Emission ... -
Farklı tip betonarme binalar için geliştirilmiş hasar tahmin yöntemleri
(2017)Bu çalışmanın başlıca amacı; olası bir depremde meydana gelecek hasar ve kayıp olasılıklarını tahmin etmeye yarayan bir hasar tahmin metodu geliştirmektir. Bu amaçla; 11 farklı tip betonarme yapı için hasar olasılık ...