Başlık için Mühendislik Fakültesi listeleme
Toplam kayıt 847, listelenen: 432-451
-
Improving thermal performance of thermoelectric coolers (TECs) through a nanofluid driven water to air heat exchanger design: An experimental research
(Pergamon-Elsevier Science Ltd, 2020)In this study, impacts of nanofluid use in thermoelectric coolers (TECs) on cooling power and main performance parameters are investigated through a comprehensive experimental methodology. For this purpose, a water cooled ... -
Improving thermal power of a cylindrical solar cooker via novel micro/nano porous absorbers: A thermodynamic analysis with experimental validation
(Pergamon-Elsevier Science Ltd, 2018)In this paper, cylindrical solar cookers with microporous absorbers are experimentally and numerically investigated in terms of thermodynamic performance figures. For a typical spring day in Bayburt, which is a good example ... -
Improving thermal resistance of lightweight concrete hollow bricks: A numerical optimisation research for a typical masonry unit
(Erol Kurt, 2020)Heat loss/gain through the walls accounts for about 30% of the total building energy losses. Bricks are indispensable parts of buildings as a very common masonry wall unit; hence the present work aims at optimising thermal ... -
In silico studies to develop new GSK3 beta inhibitors effective in the 's disease
(Bentham Science Publications, 2022)Background: Alzheimer's disease affects a large part of the world's population by prolonging the human life span and becoming an economic burden in the health system. Therefore, its treatment becomes more and more important ... -
In silico studies to develop new GSK3β inhibitors effective in the alzheimer's disease
(Bentham Science Publishers, 2022)Background: Alzheimer's disease affects a large part of the world’s population by prolonging the human life span and becoming an economic burden in the health system. Therefore, its treatment be-comes more and more important ... -
Increasing the performance of a hospital department with budget allocation model and machine learning assisted by simulation
(Taylor & Francis Inc., 2024)The COVID-19 pandemic highlighted the critical need for efficient resource management in healthcare. In this study, the internal medicine outpatient clinic in a hospital is modelled by simulation method. Appropriate ... -
Influence of 3D-printed polymer structures on dynamic splitting and crack propagation behavior of cementitious tailings backfill
(Elsevier, 2022)Originally developed for polymer materials, 3D printing is an encouraging technique to create versatile geometric shapes and high-precision construction elements from various materials. 3D-printed polymer structures are ... -
Influence of downstream cross-sectional area ratio on flow boiling characteristics of expanding micro pin fin heat sinks
(Elsevier, 2023)In the present study, influence of downstream cross-sectional area ratio on flow boiling behavior of expanding micro-pin-fin heat sinks was experimentally studied. Three structured micro-pin-fin heat sinks, namely, Type1, ... -
The influence of exhaust gas recirculation on the characteristics of compression ignition engines powered by tamanu methyl ester
(Oxford University Press, 2022)This study aims to assess the performance of compression ignition (CI) engine powered with various biodiesels. The engine used for this test was a single-cylinder, water-cooled, naturally aspirated, CI engine. The biodiesels ... -
Influence of film thickness and composition on the martensitic transformation in epitaxial Ni-Mn-Sn thin films
(Pergamon-Elsevier Science Ltd, 2015)Two series of epitaxial Ni-Mn-Sn thin films of different thickness are investigated for the thickness and composition dependence of the martensitic transformation. Thin films ranging in thickness from 20 to 200 nm (series ... -
Influence of Ge content and annealing conditions on the PL properties of nc-Si1-xGex embedded in SiO2 matrix in weak quantum confined regime
(Elsevier Science Bv, 2014)Fabrication of Si (nc-Si), Ge (nc-Ge), and Si1-xGex (nc-Si1-xGex) nanocrystals embedded in SiO2 matrix is achieved by thermal annealing of magnetron-sputtered thin films. Effects of annealing conditions, namely duration ... -
Influence of hydrofluoric acid leaching and roasting on mineralogical phase transformation of pyrite in sulfidic mine tailings
(Mdpi, 2020)Under the oxidative roasting process, pyrite, as a major mineral in sulfidic mine tailings, can transform to iron oxides. Generated iron oxides, if exhibiting enough magnetic properties, can be recovered via magnetic ... -
Influence of industrial solid waste as filling material on mechanical and microstructural characteristics of cementitious backfills
(Elsevier, 2021)Use of industrial solid wastes (e.g., fly ash, desulfurization gypsum, steel slag) as mine fill material not only solves the environmental risks dictated by the sustainable management of these wastes, but also reduces the ... -
Influence of solid content, cement/tailings ratio, and curing time on rheology and strength of cemented tailings backfill
(Mdpi, 2020)Understanding the flow process of cemented tailings backfill (CTB) is important for successful pumping into underground stopes. This study examines the effects of solid content (SC), cement/tailings (c/t) ratio, and curing ... -
Influence of types and contents of nano cellulose materials as reinforcement on stability performance of cementitious tailings backfill
(Elsevier, 2022)This study explores the quality of cemented tailings backfill (CTB) reinforced with diverse nano cellulose materials (NCMs) such as micro-fibrillated cellulose (MFC), hydroxylated cellulose nanofiber (CNF), and cellulose ... -
Influence of types and shapes of 3D printed polymeric lattice on ductility performance of cementitious backfill composites
(Elsevier, 2021)The compression properties of cementitious backfill composite (CBC) is strong, but their tension properties are weak and presents little ductility because of their low fatigue crack growth rate and resistance. Thus, proper ... -
Influence of ventilation strategies on dispersion and removal of fine particles: An experimental and simulation study
(Taylor & Francis Inc, 2020)In this study, effect of inlet/outlet configurations on the dispersion and removal of fine particles are examined experimentally and numerically. Ten different inlet/outlet configurations are tested for three different ... -
The influence of Y contribution on crystallographic, topographic and optical properties of ZnO: A heterojunction diode application
(Academic Press Ltd- Elsevier Science Ltd, 2015)Pure and yttrium (Y) doped ZnO samples were fabricated on micro slide glasses and p-Si wafers for device application via a simple and cheap sol-gel route using a spin coater. the characterization results of XRD, SEM and ... -
Innovative mine backfill materials and structures
(Taylor & Francis Ltd., 2023)The mining of natural resources forms three broad classes of mine waste: waste rock, tailings, and coal gangue. -
Integration of smart grid with renewable energy sources: Opportunities and challenges – A comprehensive review
(Elsevier, 2023)Renewable energy is the most promising solution to the rising problem of greenhouse gas emissions, and it also contributes to environmental protection. A typical electrical grid is a unidirectional system that converts ...
