Başlık için Mühendislik Fakültesi listeleme
Toplam kayıt 847, listelenen: 471-490
-
Investigation of heat transfer limits for flow boiling in expanding heat sinks having micro pin fins
(Elsevier, 2024)Critical heat flux (CHF) represents heat transfer limit for a heat sink working under flow boiling conditions. In the literature, for the first time, in micro-pin-fin heat sinks with expanding structure, this paper ... -
Investigation of micro-tube solid oxide fuel cell fabrication using extrusion method
(Pergamon-Elsevier Science Ltd, 2016)Extrusion is one of the most effective and inexpensive methods used in the production of ceramic tubes for tubular or micro-tubular solid oxide fuel cell (SOFC) applications. in this method, the parameters such as the ... -
Investigation of nano ulexite mineral effects on mechanical behaviour of warm mix asphalt pavements
(Croatian Soc Civil Engineers-Hsgi, 2020)The research presented in the paper shows that further investigations on additives used in the warm mix asphalt technology are needed. It was observed that the negative effect of adhesion loss in asphalt mixes produced by ... -
Investigation of passive radar target detection performance improvement by using multiple co-located FM radio transmitters
(2019)Interest in passive radar systems is increasing because of its hidden operational capabilities, cost effectiveness and low maintenance requirements. The greatest advantage of these systems is that they can detect and follow ... -
Investigation of photocatalytic performance of GaN-WSSe under vertical strain
(Recep Tayyip Erdoğan University, 2023)The utilization of mechanical strain is an essential way to modify and optimize the physical properties of materials, possibly making them usable for a variety of applications, including nanoelectronics and renewable ... -
Investigation of photoluminescence mechanisms from SiO2/Si:SiO2/SiO2 structures in weak quantum confined regime by deconvolution of photoluminescence spectra
(Amer Scientific Publishers, 2016)Si nanocrystals embedded in SiO2 matrix were prepared by co-sputtering method followed by a post annealing process in N-2 ambient. By fixing sputtering parameters, the effects of annealing time and annealing temperature ... -
The investigation of stability of n-CdS/p-Cu2S solar cells prepared by cold substrate method
(IOP Publishing, 2021)In this study, two different n-CdS/p-Cu2S solar cells were prepared by evaporating Cu at different substrate temperatures (200 K and 300 K) by vacuum evaporation method on a single crystal CdS semiconductor. Field emission ... -
Investigation of temperature distribution and performance of SOFC short stack with/without machined gas channels
(Pergamon-Elsevier Science Ltd, 2016)Solid oxide fuel cells (SOFCs) generate clean energy via electrochemical reactions at high operating temperatures. the distribution of the electrochemical reactions in the cell depends on the flow field design of the ... -
Investigation of the cutting forces and surface roughness in milling carbon fiber reinforced polymer composite material
(Inst Za Kovinske Materiale I in Tehnologie, 2016)In this study, milling of a carbon-fiber-reinforced polymer composite material (CFRP) was investigated experimentally using various carbide end mills. the input parameters included the spindle speed, feed rate and cutting ... -
Investigation of the effect of different power degree NdFeB magnets used in interior permanent magnet brushless direct current motor (IPMBLDC) on motor performance
(Gazi Üniversitesi, 2023)Purpose: In this study, it is aimed to determine the effects of magnets used in BLDC motors on the motor performance of NdFeB type magnets with different power densities at different temperatures. Theory and Methods: The ... -
Investigation of the effects of miscible and immiscible binary fluids on thermal performance of pulsating heat pipes
(Springer, 2021)Present paper reports and discusses experimental results related to thermal and flow characteristics of asymmetrical designed flat plate closed loop pulsating heat pipe charged with miscible and immiscible binary fluids. ... -
Investigation of the effects of T5 and T6 heat treatments on the structural, mechanical, and tribological properties of Zn-40Al-2Cu-0.1Sr alloy
(Gazi Üniversitesi, 2024)To assess the effects of T5 and T6 heat treatments on the structural, mechanical, and tribological properties of Zn-40Al-2Cu-0.1Sr alloy several ingots were produced by the permanent mold casting. The structure and properties ... -
Investigation of the electrical properties of Ag/n-Si schottky diode obtained by two different methods
(Korean Assoc Crystal Growth, Inc, 2020)In present study, Ag/n-Si Schottky diodes were produced by vacuum evaporation method at two different substrate temperatures (200 K and 300 K) and structural, optical, electrical properties were investigated. X-ray diffraction ... -
An investigation of the factors that influence online learners' satisfaction with the learning experience
(Springer, 2023)Online learning environments offer flexibility for learners who would like to study at a distance. However, research informs us that online learners are usually less likely to complete the learning experience and more ... -
An investigation of the Nb doping effect on structural, morphological, electrical and optical properties of spray deposited F doped SnO2 films
(Iop Publishing Ltd, 2013)F and Nb + F co-doped SnO2 thin films were deposited on glass substrates by the spray pyrolysis method. the microstructural, morphological, electrical and optical properties of the 10 wt% F doped SnO2 (FTO) thin films were ... -
Investigation of the relationship among fault types, focal depths, and Ionospheric TEC anomalies before large earthquakes between 2000 and 2020
(ASCE- American Society of Civil Engineers, 2022)In this study, the relationships between possible ionospheric total electron content (TEC) anomalies and earthquake focal depths and fault types were investigated using 3,099 global earthquakes with Mw >= 6.0 between 2000 ... -
Investigation of thermoelectric cooler system effect on induction motor performance
(Institute of Electrical and Electronics Engineers Inc., 2021)Induction motors are generally cooled by the fan connected to the motor shaft, as the cooling of electrical machines is important. In this study, an alternative method is proposed for cooling of induction motors. Thermoelectric ... -
Investigation on the fatigue behavior of 7075 aluminum alloy at different aging states
(Elsevier, 2023)To study the effect of the aging state on the low-cycle fatigue (LCF) performance of 7075 Al alloy, LCF experiments with different strain amplitudes (& UDelta;& epsilon;/2 = 0.5%- & UDelta;& epsilon;/2 = 0.9%) were conducted ... -
Investigation on the flexural strength, failure pattern and microstructural characteristics of combined fibers reinforced cemented tailings backfill
(Elsevier, 2021)The brittleness of the cemented tailings backfill (CTB) can easily cause collapse, which seriously threatens the safety of underground mining workers and equipment. Studies have shown that fibers can improve the ductility ... -
Investıgatıon of boron and yttrıum dopıng effect on structural, electrıcal and optıcal propertıes of sol-gel spın coated sno2 thın fılms
(Natl Inst R&D Materials Physics, 2013)In this study, B and Y doped SnO2 thin films were prepared by sol-gel spin coating method. the structural, electrical and optical properties of doped SnO2 were investigated as a function of B and Y doping content. From XRD ...
