Başlık için Mühendislik Fakültesi listeleme
Toplam kayıt 847, listelenen: 580-599
-
The numerical evaluation of crash performance of the pressurized thin-walled tubes
(Springer, 2022)This paper aims to investigate the energy absorption characteristics of the pressurized thin-walled tubes under axial impact by numerical simulations. The Arbitrary Lagrangian-Eulerian (ALE) model with the Fluid-Structure ... -
Numerical investigation for convective heat transfer and friction factor under pulsating flow conditions
(E D P Sciences, 2018)For pulsating flow, the behaviours of the convective heat transfer and friction factor for a periodic corrugated channel are investigated numerically. the finite volume method is used in the numerical study. Three different ... -
Numerical investigation of creeping rockmass interaction with hardening and shrinking cemented paste backfill
(Elsevier, 2022)Revealing the interaction mechanism between the time-dependent deformation of rockmass and hardening backfill are important for successful mining design. Based on laboratory tests and numerical simulation, a framework has ... -
Numerical performance modelling of solar chimney power plants: Influence of chimney height for a pilot plant in Manzanares, Spain
(Elsevier, 2020)3D axisymmetric CFD model is developed for a solar chimney power plant (SCPP) in Manzanares, Spain, and potential impacts of chimney height (H) on main performance parameters are comprehensively analysed. Mesh-independent ... -
Numerical simulation of the total hip prosthesis under static and dynamic loading (for three activities)
(Techno-Press, 2023)This study aims to simulate the mechanical behavior of the total prosthesis model of Charnley (CMK3) by the 3D finite element method and to determine the state of the stresses in the femoral components (prosthesis, cement, ... -
Numerical study on entropy generation in L-shaped curved channels
(Inderscience Enterprises Ltd, 2016)A numerical study is performed on entropy generation in L-shaped curved channel for constant wall temperature boundary condition and fully developed laminar flow. An elliptic Fortran program based on SIMPLE algorithm is ... -
Numerical study on microscale and macroscale strength behaviors of hardening cemented paste backfill
(Elsevier, 2022)Computer aided optimization of cement-based materials proportion can accurately quantify the accompanying microstructure evolution, material composition, and the mechanical properties changes. However, no relevant research ... -
OFDM performance of ultra wideband in wireless body area network channel
(Polish Acad Sciences Inst Physics, 2017)Data transfer for health monitoring can be highly critical because of life dependency transmitted data. IEEE 802.15.6 is a standard for wireless body area network published in 2012 to satisfy the reliability which is ... -
Olfaction recognition by EEG analysis using wavelet transform features
(Ieee, 2016)The responses of the brain into different information coming from sense organs could be analyzed by various kinds of measuring techniques. Among the existing techniques, Electroencephalography (EEG) is widely used because ... -
On channel estimation in DC biased optical OFDM systems over VLC channels
(Ieee, 2016)Visible Light Communication(VLC) has been considered as a potential access option for 5G wireless systems to solve performance limitation due to bandwidth shortage at radio frequency (RF) band. in (VLC) system, illumination ... -
On the effect of green nonstructural materials on scour reduction downstream of grid dissipators
(IWA Publishing, 2023)In this study, a nonstructural and eco-friendly solution has been used to reduce scouring downstream of screens. Upstream of the screen are stilling basins protected against scouring, but downstream locations are subjected ... -
On the plane receding contact between two functionally graded layers using computational, finite element and artificial neural network methods
(Wiley, 2022)The frictionless double receding contact problem for two functionally graded (FG) layers pressed by a uniformly distributed load is addressed in this paper. The gradation in the layers is assumed to follow an exponential ... -
On the tse of nanofluids in solar energy applications
(Springer, 2020)Renewable energy technologies are in the centre of interest to narrow the gap between fossil fuels and clean energy systems. the dominant role of solar energy systems among the alternatives is beyond question owing to being ... -
Optical and electrical properties of refined carbon derived from industrial tea waste
(Iop Publishing Ltd, 2020)The utilization of nano- and well-ordered carbon materials such as graphene especially in carbon-based electrical devices and in energy storage areas is becoming important in terms of developing economical methods and ... -
Optical and structural properties of bismuth doped ZnO thin films by sol-gel method: urbach rule as a function of crystal defects
(Polish Acad Sciences Inst Physics, 2014)Bismuth (Bi) doped zinc oxide (ZnO:Bi) thin films were prepared on glass substrates by sol gel spin coating technique using homogeneous precursor solutions, and effects of Bi doping on the structural and optical properties ... -
Optical properties of GaS crystals: Combined study of temperature-dependent band gap energy and oscillator parameters
(National Institute of Science Communication and Information Resources (NISCAIR), 2017)Optical parameters of gallium sulfide (GaS) layered single crystals have been found through temperature-dependent transmission and room temperature reflection experiments in the wavelength range of 400-1100 nm. Experimental ... -
Optical, vibrational, electrical, and electrochemical studies of new plasticized methylcellulose-based solid polymer electrolytes for supercapacitor application
(Wiley, 2023)In this work, new plasticized solid polymer electrolytes (SPEs) are developed using MC (methylcellulose) as a polymer host, and sodium iodide (NaI) as a dopant via the solution casting method. Ethyl carbonate (EC) is used ... -
Optimised performance of a thermally resistive PV glazing technology: An experimental validation
(Elsevier, 2019)Thermally resistive PV glazing (TRPVG), which is a recently developed technology for low/zero carbon buildings, is in the centre of interest worldwide as a consequence of multifunctional benefits of this novel product such ... -
Optimization of performance and emission characteristics of the CI engine fueled with preheated palm oil in blends with diesel fuel
(MDPI, 2022)In this analytical investigation, preheated palm oil was used in the direct injection diesel engine with various optimization methods. The main purpose of the optimization was to get better results than the conventional ... -
Optimization of strength, ductility and wear resistance of low-carbon grade A shipbuilding steel by post-ECAP annealing
(EDP Sciences, 2021)Effect of equal channel angular pressing (ECAP) and subsequent annealing on the microstructure, mechanical properties and tribological behavior of grade A shipbuilding steel was investigated. Coarse-grained microstructure ...
