Erişim şekli için "info:eu-repo/semantics/openAccess" Mühendislik Fakültesi listeleme
Toplam kayıt 248, listelenen: 61-80
-
Drug repositioning approach for the treatment of ankylosing spondylitıs
(Ankara University, 2022)Objective: In this study, it was aimed to determine an FDA-approved molecule that inhibits the IL-17 receptor, which is an important target for the prevention of inflammation in Ankylosing Spondylitis (AS), using the ... -
The durability of high-strength concrete containing waste tire steel fiber and Ccal fly ash
(Hindawi, 2021)The demands for high-strength concrete (HSC) have been increasing rapidly in the construction industry due to the requirements of thin and durable structural elements. HSC is highly brittle. Therefore, to augment its ... -
Düşük dolum oranında ikili karışımlarla yüklü üniform olmayan atımlı ısı borusunun deneysel incelenmesi
(Düzce Üniversitesi, 2021)Bu çalışmada, düşük bir dolum oranında ikili karışımlarla yüklü, üniform olmayan kanal profiline sahip düz plakalı kapalı döngülü atımlı bir ısı borusunun ısıl performansı ve akış davranışı deneysel olarak incelenmiştir ... -
Dynamo script and a BIM-based process for measuring embodied carbon in buildings during the design phase
(Oxford University Press, 2023)In recent years, worldwide efforts have been made towards reducing energy use and emissions, which have a variety of impacts such as contributing to climate change. Hence, environmental analysis in the construction sector ... -
Editorial: Advances in the design and implementation of cementitious backfills
(Frontiers Media, 2022)Backfill plays an essential role in the most modern mining industries worldwide. It is usually applied in the cementitious form to fill underground mined-out openings (stopes and/or voids) -
Efects of Covid‑19 outbreak on environment and renewable energy sector
(Springer, 2020)Many articles have been written in the medical feld related to the Covid-19 outbreak that has surrounded the World and killed many people. However, its environmental and energy impacts have not been sufciently studied. ... -
Effect of air pressure on nanofiber production in solution blowing method
(Gazi Univ, Fac Engineering Architecture, 2020)In this study, effect of air pressure on nanofiber diameter and morphology was studied for solution blowing technique. A computational fluid dynamics (CFD) analysis was realized via ANSYS (R) Fluent software, and the results ... -
Effect of arc re-melting on microstructure, mechanical and tribological properties of commercial 390A alloy
(Elsevier, 2021)To investigate the effect of the arc re-melting on the microstructure, mechanical and tribological properties of the 390A alloy, its ingot produced by the conventional induction melting method was subjected to the arc ... -
Effect of characteristics of natural zeolites on their geopolymerization
(Elsevier, 2021)The properties of clinoptilolite-based geopolymers are investigated with a focus on the parameters affecting the reactivity of clinoptilolite in a geopolymer binder. A complete characterization of raw materials was carried ... -
Effect of content and length of polypropylene fibers on strength and microstructure of cementitious tailings-waste rock fill
(MDPI, 2023)The mechanical strength properties of cemented tailings backfill are very important for the safe and environmentally friendly mining of mineral resources. To check the impact of polypropylene fiber on strength and ... -
Effect of different abutment materials on stress distribution in peripheral bone and dental implant system
(Yildiz Technical Univ, 2020)In this study, the effect of different abutment materials on the stress distribution in bone tissue around the dental implant was investigated using ANSYS packet program based on finite element method. the study aims to ... -
Effect of different zinc contents on the structural, mechanical and tribological properties of EN AC-48100 (Al-17Si-4Cu-Mg) Alloy
(Gazi Univ, Fac Engineering Architecture, 2020)In this study, Al-17Si-4Cu-0.6Mg-0.2Ti which is based of the EN AC-48100 alloy, Al-17Si-4Cu-0.6Mg0.2Ti-1Zn, Al-17Si-4Cu-0.6Mg-0.2Ti-2Zn, Al- 17Si-4Cu-0.6Mg-0.2Ti-3Zn, Al-17Si-4Cu-0.6Mg-0.2Ti-4Zn and Al-17Si-4Cu-0.6Mg-0.2Ti-5Zn ... -
The effect of fluorine and tungsten co-doping on optical, electrical and structural properties of tin(IV) oxide thin films prepared by sol-gel spin coating method
(Technical Univ Wroclaw, 2013)Fluorine and tungsten co-doped tin(IV) oxide (WFTO) thin films have been prepared first time by a sol gel spin coating method. the effect of F and W co-dopant ratio on optical, electrical and structural properties of SnO2 ... -
Effect of grain refinement with titanium on the microstructure, mechanical and corrosion properties of Al-25Zn alloy
(Gazi Univ, Fac Engineering Architecture, 2020)In this study, one binary Al-25n alloys and eleven ternary aluminum-zinc-titanium alloys, Al-25Zn-0.01Ti, Al-25Zn-0.03Ti, Al-25Zn-0.04Ti, Al-25Zn-0.05Ti, Al-25Zn-0.075Ti, Al-25Zn-0.1Ti, Al-25Zn-0.2Ti, Al-25Zn-0.4Ti, ... -
Effect of heat treatment on mechanical and wear properties of Zn-40Al-2Cu-2Si alloy
(Elsevier, 2021)In order to determine the effect of heat treatment on the mechanical and wear properties of Zn-40Al-2Cu-2Si alloy, different heat treatments including homogenization followed by air-cooling (H1), homogenization followed ... -
The effect of nanofluid usage on electricity consumption in thermoelectric refrigeration application: an experimental study
(2022)This study investigates the effects of nanofluid use in thermoelectric refrigerators on electricity consumption. A water-cooled block was placed on the hot surface of the TEC, and a water-to-air heat ... -
The effect of occupational choice on job satisfaction and occupational accidents in the construction sector: A case study on Rize and Çorum in Turkey
(Dynamic Academy Yazılım İnşaat San. Tic. Ltd. Şti., 2021)The construction sector is a sector that employs a significant amount of employees in Turkey and appeals to many branches of work and professions. In Turkey, the construction sector ranks first in the statistics ... -
Effects of aging state on the low-cycle fatigue properties of 2024 aluminum alloy
(Elsevier, 2024)To reveal the effects of aging state on the low-cycle fatigue (LCF) performance of 2024 Al alloy, LCF experiments were conducted on the 2024 Al alloy with three aging states (underaged (UA), peak-aging (PA) and overaged ... -
Efficiency improvement for a DC-DC quadratic power boost converter by applying a switch turn-off lossless snubber structure based on zero voltage switching
(Kaunas Univ Technology, 2018)So as to keep the converter in small size, high switching frequencies are normally used. As a result, in higher frequencies, switching losses seriously affect the efficiency. Current and voltage stresses on power switch ... -
Efficient Tm:YAG and Tm:LuAG lasers pumped by 681 nm tapered diodes
(OSA - The Optical Society, 2019)In this paper, we present highly efficient continuous-wave (cw) laser operation of Tm:YAG and Tm:LuAG lasers pumped by high-brightness red tapered diodes. The single-emitter tapered diode lasers (TDLs) provide up to 1 W ...