Güncel Gönderiler: Mühendislik Fakültesi
Toplam kayıt 1021, listelenen: 41-60
-
Characterizing mechanical and multiscale porosity features of cementitious high sulfur tailings backfill using CT technology
(Elsevier, 2025)Since cementitious high sulfur tailings backfill (CHSTB) produces acidification during mine filling, it severely affects the environment of underground mining and filling strength in a timely manner. Therefore, the current ... -
Generative adversarial network based contrast enhancement: synthetic contrast brain magnetic resonance imaging
(Elsevier, 2024)Rationale and Objectives: Magnetic resonance imaging (MRI) is a vital tool for diagnosing neurological disorders, frequently utilising gadolinium-based contrast agents (GBCAs) to enhance resolution and specificity. However, ... -
Analysis of temperature changes in living tissue using the modified fractional thermal conduction model under laser heat flux on the skin surface
(Springer, 2025)The use of thermal conduction models, particularly the double-phase lag thermal wave model, is vital for improving thermal therapies in biological tissues. However, existing models have limitations that hinder their practical ... -
Machinability characteristics in Zn-40Al alloy: The effect of addition of copper and silicon and optimization of cutting parameters using response surface methodology
(Elsevier, 2025)In this study, the impacts of Cu and Si additions to Zn-40Al alloy on its microstructural, mechanical and machinability properties were investigated in the turning process. Zn-40Al and alloys containing 2 % Cu and 2 % Si ... -
Role of calcination process of natural colemanite powder on compressive strength property of concrete
(Elsevier, 2025)The use of boron minerals as an additive is important in terms of reducing CO2 emissions and providing input to the economy. Sustainable natural colemanite was subjected to calcination at 550 °C in order to concentrate the ... -
A stub matching fed high gain array antenna design for mm-wave application
(IEEE, 2024)Nowadays, the use of millimeter wave frequency range in wireless communication technologies, especially in 5G mobile systems, has increased the demands for higher performance and enhanced functionality. Designing efficient, ... -
Study of the behavior of TORP middle ear prostheses of various lengths by the finite element method
(Taylor & Francis Ltd., 2024)Advancements in audiology and medical engineering have sparked growing interest in enhancing titanium implants used for middle ear repair. In our study, we employed a numerical simulation model of the middle ear to investigate ... -
Evaluation of the migration and environmental effects of metal elements within cementitious gangue-fly ash backfill in underground coal mines
(Elsevier, 2024)Cementitious gangue-fly ash backfill (CGB) is used as a green mining technology worldwide. However, under the coupled effects of geological stress and groundwater, the metal elements in the CGB tend to migrate into nearby ... -
Comparison of the mechanical properties and drilling performance of the AISI 316 parts produced with casting, LPBF and WAAM
(Springer, 2024)AISI 316 stainless steel parts are widely utilized in many industrial fields with a vast scope of applications. These steel parts, which are used in many fields, can be produced using different production methods, but the ... -
Thermo-hydro-mechanical response of cementitious tailings fill to low humidity and ambient temperature interference
(Springer, 2025)Cementitious tail backfill (CTB) is a combination of mineral tails, hydraulic cement, and water that is commonly utilized for mineral resource recovery, mine waste management, and ground subsidence avoidance. Once in ... -
Optimization on the structure and filling ratio of a flexible separate heat pipe applied for tracking-type photovoltaic/thermal systems
(Elsevier, 2025)The utilization of photovoltaic/thermal (PV/T) systems with separate heat pipes holds significant potential to improve solar energy efficiency by addressing issues like winter freezing and scaling. However, challenges such ... -
A novel green and renewable energy approach; watermills in Eastern Black Sea region
(Springer, 2024)Today, energy is an indispensable necessity, making it imperative to harness even the smallest energy resources available to us and extend the benefits of this progress to rural communities, ranging from large settlements ... -
Optimization flutter response of laminated smart nanocomposite truncated conical shell under supersonic aerodynamic pressure using hybrid IGWO-DQHFEM
(Elsevier, 2025)Given the wide application of conical shells in the aerospace and aircraft industry, there comes a need for dynamic analysis and optimum design of these structures against supersonic aerodynamic forces, which induce a ... -
Structural characteristics of cement-based tail fill with sodium dodecyl sulfate, azodicarbonamide, and dodecyl trimethyl ammonium bromide
(Elsevier, 2025)The safety of mine-filled stopes is seriously affected by settlement and uneven pore distribution of cement-based tail fill (CTF). To further improve the mined-out areas' stability, it is found that foaming agents (FAs) ... -
Experimental study of the effect of non-structural materials on scouring of bridge piers with removal of river material: cationic polyacrylamide (PAM)
(Springer, 2024)Scouring damage to piers is a major risk factor for hydraulic structures. In this research, a new eco-friendly method has been proposed to reduce both the length and depth of scouring near bridges and the volume of pits ... -
Influence of processed tea waste ash on the hydration products and mechanical property of hybrid cement as an eco-friendly solution
(Elsevier, 2025)The waste generated during production in tea factories is increasing with the growth of the world population. Storage of tea waste creates problems in terms of location and environment. The aim of this study was to investigate ... -
On the multiple steady flow states in spindle shaped geometry of bridge foundations
(Isfahan University Technology, 2024)Flow hysteresis in a channel with a supercritical flow in the vicinity of a spindleshaped bridge foundation (SSBF) with a change in flow rate has been investigated in a laboratory for the first time. Two spindle-shaped ... -
A new objective diagnostic tool for attention-deficit hyper-activity disorder (ADHD): development of the distractor-embedded auditory continuous performance test
(MDPI, 2024)Background/Objectives: Attention-Deficit Hyperactivity Disorder (ADHD) is a prevalent neurodevelopmental disorder characterized by inattention, hyperactivity, and impulsivity. Traditional diagnostic methods, which depend ... -
Optimization of production parameters for impact strength of 3d-printed carbon/glass fiber-reinforced nylon composite in critical zx printing orientation
(MDPI, 2024)Additive manufacturing (AM) methods are increasingly being adopted as an alternative for mass production. In particular, Fused Deposition Modeling (FDM) technology is leading the way in this field. However, the adhesion ... -
Investigation of flow boiling phenomenon in micro-pin-fin heat sinks adapted to actively direction-changing moving systems
(Elsevier, 2024)Thermal management via boiling phenomenon in micro domain is one of the promising techniques for different types of aircrafts being continuously subjected to direction-changed movement. Therefore, in this paper, different ...
