Güncel Gönderiler: Mühendislik Fakültesi
Toplam kayıt 1048, listelenen: 981-1000
-
Rheological properties of cemented paste backfill with alkali-activated slag
(Mdpi, 2020)This study investigates the time-dependent rheological behavior of cemented paste backfill (CPB) that contains alkali-activated slag (AAS) as a binder. Rheological measurements with the controlled shear strain method have ... -
Microstructural, mechanical and tribological properties of ultrafine-grained Cu-Cr-Zr alloy processed by high pressure torsion
(Elsevier Science Sa, 2020)The effect of temperature on tribological properties of coarse grained (CG) and ultrafine-grained (UFG) Cu-Cr-Zr alloy processed via high pressure torsion (HPT) was investigated. Dominant wear mechanism depends on both ... -
Cold substrate method to prepare plasmonic Ag nanoparticle: deposition, characterization, application in solar cell
(Springer Heidelberg, 2020)In this study, the surface plasmon effects of the Ag nanoparticle were investigated depending on the substrate temperature and coating time. Deposition procedure for the Ag coating was the vacuum deposition at low substrate ... -
Determination of delamination in drilling of carbon fiber reinforced carbon matrix composites/Al 6013-T651 stacks
(Elsevier Sci Ltd, 2020)Delamination at the hole entrance and exit during drilling of the FRPs composites adversely affects the hole surface quality and engineering properties of this material. in this study, delamination occurrence in hole ... -
Machinability properties of Al-7Si, Al-7Si-4Zn and Al-7Si-4Zn-3Cu alloys
(Springer Heidelberg, 2020)Al-7Si, Al-7Si-4Zn, Al-7Si-4Zn-3Cu alloys were produced by permanent mold casting method to investigate the effects of copper and zinc additions on the machinability properties of Al-7Si alloy. the structural and mechanical ... -
A photovoltaic powered electrolysis converter system with maximum power point tracking control
(Pergamon-Elsevier Science Ltd, 2020)One of the main problems for renewable and other innovative energy sources is the storage of energy for sustainability. This study focuses on two different scenarios to benefit from solar energy more efficiently. Photovoltaic ... -
Effect of zinc content and cutting tool coating on the machinability of the Al-(5-35) Zn alloys
(Korean Inst Metals Materials, 2020)In this study, Al-5Zn, Al-15Zn, Al-25Zn and Al-35Zn alloys containing 5, 15, 25 and 35 wt% Zn, respectively were produced by permanent mold casting. Their microstructures and mechanical properties were investigated using ... -
Prediction of parameters which affect beach nourishment performance using MARS, TLBO, and conventional regression techniques
(Springer International Publishing Ag, 2020)Artificial beach nourishment is one of the most important environmentally friendly coastal protection methods since it protects the aesthetic and recreational values of the beach and increases its protective properties. ... -
Theoretical and experimental evaluation of thermoelectric performance of alkaline earth filled skutterudite compounds
(Academic Press Inc Elsevier Science, 2020)Skutterudite compounds are one of the most promising thermoelectric materials that can be used for intermediate power generation applications because of their excellent thermoelectric and mechanical properties. in spite ... -
Optical and electrical properties of refined carbon derived from industrial tea waste
(Iop Publishing Ltd, 2020)The utilization of nano- and well-ordered carbon materials such as graphene especially in carbon-based electrical devices and in energy storage areas is becoming important in terms of developing economical methods and ... -
Analysis of ionospheric TEC anomalies for global earthquakes during 2000-2019 with respect to earthquake magnitude (Mw >= 6.0)
(Pergamon-Elsevier Science Ltd, 2020)In this work, a relationship between ionospheric TEC anomalies and different earthquake magnitude groups before the main shocks was investigated. For this purpose, 2942 global earthquakes with Mw >= 6 from 2000 to 2019 and ... -
Investigation of the electrical properties of Ag/n-Si schottky diode obtained by two different methods
(Korean Assoc Crystal Growth, Inc, 2020)In present study, Ag/n-Si Schottky diodes were produced by vacuum evaporation method at two different substrate temperatures (200 K and 300 K) and structural, optical, electrical properties were investigated. X-ray diffraction ... -
A new evolutionary preprocessing approach for classification of mental arithmetic based EEG signals
(Springer, 2020)Brain computer interface systems decode brain activities from electroencephalogram (EEG) signals and translate the user's intentions into commands to control and/or communicate with augmentative or assistive devices without ... -
Temporal, geochemical and geodynamic evolution of the Late Cretaceous subduction zone volcanism in the eastern Sakarya Zone, NE Turkey: Implications for mantle-crust interaction in an arc setting
(Pergamon-Elsevier Science Ltd, 2020)The Late Cretaceous Artvin volcanic rocks (LCAVs) from the eastern Sakarya zone (ESZ) of NE Turkey are composed of mafic/basaltic (S1-catak and S2-caglayan) and felsic/acidic (S1-Kizilkaya and S2-Tirebolu) rock types that ... -
Fiber length effect on strength properties of polypropylene fiber reinforced cemented tailings backfill specimens with different sizes
(Elsevier Sci Ltd, 2020)The strength properties of cemented tailings backfill (CTB: an engineered mix of processing tailings, hydraulic binder and mixing water) is strongly affected by its structural integrity. However, our understanding of the ... -
The effect of solid boriding time on the structure, hardness and corrosion properties of AISI 5140 steel
(Maik Nauka/Interperiodica/Springer, 2020)In this study, AISI 5140 steel samples were borided in an electrical furnace at a temperature of 950 degrees C for 4, 6 and 8 h. Structural examinations, hardness measurement and corrosion tests were performed to determine ... -
Transition coefficients between compressive strengths of samples with different shape and size in mass concrete and use of weight maturity method in dam construction
(Ernst & Sohn, 2019)Mass concrete (MC) is widely used in dam concretes due to their large aggregate grain diameters, low cement dosage, and low hydration temperatures. Monitoring of the hydration temperature and compressive strength is an ... -
Determination of the pozzolanic activities of trachyte and rhyolite and comparison of the test methods implemented
(Springer International Publishing Ag, 2020)Natural pozzolanas should be evaluated in terms of sustainability as well as their contribution to concrete durability. Therefore, the use of such materials in the production of cement as well as concrete industry has been ... -
Use of the cold substrate method for biomaterials: the dtructural and biological properties of the Ag layers deposited on Ti-6Al-4V
(Springer, 2020)Silver nanofilms were vacuum-deposited on Ti-6Al-4V substrates at low (< 300 K) temperatures to improve their biocompatibility. After the surface of the Ti-6Al-4V samples was coated with Ag over the temperature range from ... -
Particle dispersion and deposition in displacement ventilation systems combined with floor heating
(Taylor & Francis Inc, 2020)The aim of this study is to investigate dispersion and deposition characteristics of different particle diameters (0.5-5-10 mu m) for a displacement ventilated and floor heated environment, experimentally and numerically. ...
