Ara
Toplam kayıt 69, listelenen: 51-60
Changing the conductivity type of ultrasonically sprayed ZnO thin films: comparison of the effects of Li, N, and B dopants
(Springer, 2023)
ZnO is a material widely used in technological applications. However, the difficulty of preparing p-type ZnO creates a bottleneck for developing ZnO-based devices. In this study, Li, N, and B-doped ZnO thin films were ...
The influence of substrate temperature on the morphology, optical and electrical properties of thermal-evaporated ZnTe Thin Films
(Elsevier, 2009)
The structural, morphological, optical and electrical properties of ZnTe films deposited by evaporation were investigated as a function of substrate temperature (at -123 and 27 °C) and post-deposition annealing temperature ...
CdTe thin film solar cells prepared by a low-temperature deposition method
(Wiley, 2010)
Low-temperature vacuum deposition instead of the commonly used vacuum deposition at high substrate temperatures has been applied to prepare high efficiency (CdS/CdTe) solar cells. CdS and CdTe thin films have been subsequently ...
The influence of substrate temperature on electrical properties of Cu/CdS/SnO2 Schottky diode
(Elsevier, 2011)
Polycrystalline CdS samples on the SnO2 coated glass substrate were obtained by vacuum evaporation method at low substrate temperatures (T S=200 and 300 K) instead of the commonly used vacuum evaporation at high substrate ...
Impact of CdSeTe and CdSe film deposition parameter on the properties of CdSeTe/CdTe absorber structure for solar cell applications
(Institute of Physics, 2024)
In this study, the effect of depositing CdSeTe and CdTe layers at different substrate temperatures (STs) by evaporation in vacuum on the properties of the CdSeTe/CdTe stacks was investigated. First, CdSeTe layers in stack ...
Performance assessment of oxygenated CdS films-based photodetector
(Elsevier, 2024)
dS films were grown by thermal evaporation on glass substrates. After growth process, samples were oxygenated at 400 °C at various gas pressures for 5 mins employing rapid thermal process. The produced CdS films were used ...
Improving solar cell efficiency through controlled annealing effects of TiO2 thin films
(Wiley, 2024)
In the scope of this research, the impact of thermal annealing on the electrical and optical characteristics of TiO2 thin films is investigated through empirical analysis. Varied annealing temperatures are applied during ...
An investigation on CdSeTe/CdTe stacks deposited by evaporation: Impact of Halide treatment depending on the applied surface
(Wiley, 2024)
Among the methods applied to modify the characteristics of CdSeTe/CdTe stacks, one of the most well-known and widely used procedures is the CdCl2 halide treatment. In this connection, the influence of CdCl2 on microstructural ...
Preparation and characterization of new window material CdS thin films at low substrate temperature (<300 K) with vacuum deposition
(Elsevier, 2011)
Low-temperature vacuum deposition instead of the commonly used vacuum deposition at high substrate temperatures has been applied to prepare new window material CdS thin films. The structural, optical and electrical properties ...
Effect of CdCl2/annealing on the crystalline transformation of CdTe thin films grown by evaporation at a low substrate temperature
(TÜBİTAK, 2011)
The structural and optical properties of CdTe thin films prepared at a low substrate temperature were investigated before and after the CdCl 2/annealing. The crystal structure of CdTe film was cubic with a strong (111) ...