Ara
Toplam kayıt 55, listelenen: 31-40
Experimental investigation of coaxial impinging air jets
(Pergamon-Elsevier Science Ltd, 2018)
This study experimentally investigates hydrodynamical and thermal characteristics of coaxial confined impinging turbulent air jets. Various values of the dimensionless nozzle-to-plate distances and dimensionless flowrate ...
Experimental investigation of flow boiling in single minichannels with low mass velocities
(Pergamon-Elsevier Science Ltd, 2018)
Flow boiling characteristics in a single minichannel with the aspect ratio of 2 (1.8 mm width and 0.9 mm height) are studied experimentally. Experiments are conducted for different values of the wall heat flux (in the range ...
Elyaf takviyeli polimer kompozit malzemelerin farklı delme yöntemleri ile delinmesinde kesme performansının değerlendirilmesi: Literatür Taraması
(2018)
Elyaf takviyeli polimer kompozit (ETPK) malzemeler, yüksek mukavemet ve sönümleme, hafiflik, düşük termal genleşme gibi mühendislik özelliklerinden dolayı uzay ve havacılık sanayisinde cıvatalı, perçinli ve pimli bağlantılarda ...
Zn-15Al-3Cu-1Si alaşımı ve SAE 660 bronzunun yağlı durumdaki aşınma karakteristikleri
(2018)
Bu çalışmada Zn-15Al-3Cu-1Si alaşımının yağlı çalışma koşullarındaki sürtünme ve aşınma davranışlarıblok-disk tipi bir deney düzeneği kullanılarak incelendi. Sürtünme ve aşınma deneyleri farklı yağ debileri(0,25-3,0 cm3h-1), ...
Experimental investigation of heat transfer characteristics and wall pressure distribution of swirling coaxial confined impinging air jets
(Pergamon-Elsevier Science Ltd, 2018)
In the present study, swirling coaxial confined impinging turbulent air jets issuing from a novel designed nozzle is studied experimentally. Heat transfer characteristics and pressure distribution on the impingement plate ...
Experimental study of single-phase fluid flow and heat transfer characteristics in rectangular microchannels
(2018)
In this study, single-phase laminar flow of deionized water through microchannel heat sinks is investigated experimentally. Heat sinks including twenty-nine parallel rectangular channels have been used as the test samples. ...
Exergetic performance comparison of air and hydrogen gas flowing through the annular curved duct
(Pergamon-Elsevier Science Ltd, 2018)
The main objective of this study is to parametrically compare the exergetic performance of air and hydrogen gas flow through the curved annular duct. For this purpose, it is assumed that, i) air and hydrogen are considered ...
Sustainable ventilation strategies in buildings: CFD research
(Elsevier, 2019)
Developing technology and architectural design techniques have affected the field of architecture to a great extent. As a result, human comfort has become increasingly important in recent years. A natural ventilation cooling ...
The effect of Total flowrate on the cooling performance of swirling coaxial impinging jets
(Springer, 2019)
Thermal management ability of swirling coaxial confined impinging air jets (SCCIAJ) are experimentally studied for different total flowrate. the coaxial structure of the jet is provided by a nozzle which is a cylindrical ...
Effect of strontium and magnesium additions on the microstructure and mechanical properties of Al-12Si alloys
(Korean Inst Metals Materials, 2019)
In this study, a binary Al-12Si, eight ternary Al-12Si-Sr, and six quaternary Al-12Si-0.1Sr-(0.2-1)Mg alloys were produced by permanent mold casting. It was observed that microstructure of the binary alloy consisted of the ...