Ara
Toplam kayıt 164, listelenen: 61-70
Düşük dolum oranında ikili karışımlarla yüklü üniform olmayan atımlı ısı borusunun deneysel incelenmesi
(Düzce Üniversitesi, 2021)
Bu çalışmada, düşük bir dolum oranında ikili karışımlarla yüklü, üniform olmayan kanal profiline sahip düz
plakalı kapalı döngülü atımlı bir ısı borusunun ısıl performansı ve akış davranışı deneysel olarak incelenmiştir ...
Impact of tower diameter on power output in solar chimney power plants
(2021)
Güneş bacası güç santralleri düşük bakım maliyetleri ve sıfır CO2 salınımları ile çok cazip güneş enerjisi
sistemleridir. İlk uygulaması olan Manzanares tesisinden sonra geometrik ve iklimsel parametrelerin
sisteme etkisi ...
Kokil kalıba döküm yöntemi ile üretilmiş Al-12Si-(0,02-1)Sr alaşımlarının CVD-TiCN/Al2O3/TiN kaplamalı kesici uç ile tornada işlenmesinde kesme kuvveti ve yüzey pürüzlülüğü üzerine deneysel çalışma
(Gazi Üniversitesi , Fen Bilimleri Enstitüsü, 2022)
In this study, three Al-12Si-Sr alloys containing different ratios (0.02; 0.1 and 1%) strontium (Sr) were
manufactured by the permanent mold casting method. The microstructures of the manufactured alloys were
determined ...
A method to classify steel plate faults based on ensemble learning
(2022)
With the industrial revolution 4.0, machine learning methods are widely used in all
aspects of manufacturing to perform quality prediction, fault diagnosis, or maintenance. In the steel
industry, it is important to ...
The effect of nanofluid usage on electricity consumption in thermoelectric refrigeration application: an experimental study
(2022)
This study investigates the effects of nanofluid use in thermoelectric refrigerators on
electricity consumption. A water-cooled block was placed on the hot surface of the TEC, and
a water-to-air heat ...
On the tse of nanofluids in solar energy applications
(Springer, 2020)
Renewable energy technologies are in the centre of interest to narrow the gap between fossil fuels and clean energy systems. the dominant role of solar energy systems among the alternatives is beyond question owing to being ...
Particle dispersion and deposition in displacement ventilation systems combined with floor heating
(Taylor & Francis Inc, 2020)
The aim of this study is to investigate dispersion and deposition characteristics of different particle diameters (0.5-5-10 mu m) for a displacement ventilated and floor heated environment, experimentally and numerically. ...
Effect of grain refinement with titanium on the microstructure, mechanical and corrosion properties of Al-25Zn alloy
(Gazi Univ, Fac Engineering Architecture, 2020)
In this study, one binary Al-25n alloys and eleven ternary aluminum-zinc-titanium alloys, Al-25Zn-0.01Ti, Al-25Zn-0.03Ti, Al-25Zn-0.04Ti, Al-25Zn-0.05Ti, Al-25Zn-0.075Ti, Al-25Zn-0.1Ti, Al-25Zn-0.2Ti, Al-25Zn-0.4Ti, ...
Enhanced performance figures of solar cookers through latent heat storage and low-cost booster reflectors
(Oxford Univ Press, 2020)
Solar box cookers draw attention of many researchers across the globe as a promising renewable energy application for cooking purposes. Compared to other types available in literature, solar box cookers are more in the ...
Determination of delamination in drilling of carbon fiber reinforced carbon matrix composites/Al 6013-T651 stacks
(Elsevier Sci Ltd, 2020)
Delamination at the hole entrance and exit during drilling of the FRPs composites adversely affects the hole surface quality and engineering properties of this material. in this study, delamination occurrence in hole ...