Ara
Toplam kayıt 17, listelenen: 11-17
Effects of titanium addition on structural, mechanical, tribological, and corrosion properties of Al-25Zn-3Cu and Al-25Zn-3Cu-3Si alloys
(Elsevier, 2020)
To investigate the effect of grain refinement on the material properties of recently developed Al-25Zn-3Cu based alloys, Al-25Zn-3Cu, Al-25Zn-3Cu-0.01Ti, Al-25Zn-3Cu-3Si and Al-25Zn-3Cu-3Si-0.01Ti alloys were produced by ...
The effect of solid boriding time on the structure, hardness and corrosion properties of AISI 5140 steel
(Maik Nauka/Interperiodica/Springer, 2020)
In this study, AISI 5140 steel samples were borided in an electrical furnace at a temperature of 950 degrees C for 4, 6 and 8 h. Structural examinations, hardness measurement and corrosion tests were performed to determine ...
Effect of case depths on corrosion properties of hard anodic oxidized A356 aluminum alloy
(World Stientific Publishing, 2023)
In this work, A356 alloy samples having a dimension of 4x20x20mm were coated by hard anodic oxidation method at eight different thicknesses up to similar to 80 mu m. The sample surfaces and longitudinal section of these ...
Effect of strontium on the microstructure, mechanical, and tribological properties of the Zn-40Al-2Cu alloy
(Springer, 2023)
Zn-40Al-2Cu and Zn-40Al-2Cu-0.1Sr alloys were produced by permanent mold casting method. The microstructure, mechanical properties and wear resistance of the produced alloys were investigated. Microstructural examinations ...
Performance evaluation of different carbide inserts in turning of newly developed Al-12Si-0.1Sr alloyLeistungsbewertung verschiedener Hartmetalleinsatze beim Drehen einer neu entwickelten Al-12Si-0.1Sr-Legierung
(Wiley, 2023)
An Al-12Si-0.1Sr alloy ingot was manufactured using a permanent mold casting technique. The microstructure and mechanical properties of this alloy were researched. Effects of different cutting conditions (cutting speed-V: ...
Effect of isothermal treatment on mechanical and tribological properties of alloy Zn – 40% Al – 2% Cu – 2% Si
(Springer, 2023)
The effect of isothermal exposure at temperatures from 100°C to 250°C for 8 hours on the structure, mechanical and tribological properties of the Zn – 40% Al – 2% Cu – 2% Si alloy produced by chill casting is studied. The ...
Mechanical properties of Al-9Si-0.6Mg-0.1Sr alloy processed by successive hot and cold multi-directional forging
(Springer, 2023)
In this study, the effect of successive hot and cold multi-directional forging (MDF) on the mechanical properties of the Al-9Si-0.6Mg-0.1Sr alloy was explored. The alloy was first homogenized and then forged at 200°C from ...