Ara
Toplam kayıt 206, listelenen: 61-70
Combined influence of artificial nucleation site and expanding cross section on flow boiling performance of micro pin fins
(Elsevier, 2022)
Present paper experimentally studies combined influence of artificial nucleation sites and expanding cross section on saturated flow boiling performance of heat sinks with micro pin fins. Thermal and visualization-based ...
Heat storage and release performance of cascade phase change units for solar heating in a severe cold region of China
(MDPI, 2022)
The heat storage and release performance of cascade phase change units are investigated numerically for users in Inner Mongolia's severe cold region. Three schemes of phase change material combinations are thoroughly tested. ...
UV coated acrylics as a substitute for generic glazing in buildings of Indian climatic conditions: Prospective for energy savings, CO2 abatement, and visual acceptability
(Elsevier, 2022)
The generic clear glass used in the existing buildings has the limitations such as high heat gain/loss, glare, and poor thermal performance. Substitution for the existing building conventional glazing systems should be ...
A novel latent heat storage unit by introducing jet breakup of phase change material
(Elsevier, 2022)
To enhance the heat transfer performance in discharging process, the jet breakup of molten phase change material was introduced into a real scale heat storage unit by numerical method. In order to fully understand its ...
A numerical analysis of convection heat transfer and friction factor for oscillating corrugated channel flows
(Taylor and Francis Ltd., 2019)
The aim of this article is to understand numerically the flow and heat transfer characteristics under oscillating flow conditions for periodically corrugated wavy channel. For the same channel, under steady-state flow ...
The mechanical compression performance of ultra-fine grained stainless steel pyramidal lattice core
(Taylor & Francis Inc, 2019)
Severe plastic deformation (SPD) techniques are prospective ones having ability for desirable high mechanical properties to be achieved without any chemical change in metals. Equal-channel angular pressing (ECAP), one of ...
A review on converting plastic wastes into clean hydrogen via gasification for better sustainability
(Wiley, 2021)
This review paper focuses on converting plastic wastes into clean hydrogen via gasification for better sustainability. In this regard, various aspects of hydrogen production from plastic wastes are discussed and comparatively ...
Performance evaluation of using evacuated tubes solar collector, perforated fins, and pebbles in a solar still - experimental study and CO2 mitigation analysis
(Springer, 2022)
The combination of various methods of increasing evaporation rate can highly impact the performance of solar desalination. This investigation aims to find the impact of using evacuated tubes solar collector, perforated ...
The influence of exhaust gas recirculation on the characteristics of compression ignition engines powered by tamanu methyl ester
(Oxford University Press, 2022)
This study aims to assess the performance of compression ignition (CI) engine powered with various biodiesels. The engine used for this test was a single-cylinder, water-cooled, naturally aspirated, CI engine. The biodiesels ...
Optimization of performance and emission characteristics of the CI engine fueled with preheated palm oil in blends with diesel fuel
(MDPI, 2022)
In this analytical investigation, preheated palm oil was used in the direct injection diesel engine with various optimization methods. The main purpose of the optimization was to get better results than the conventional ...