Ara
Toplam kayıt 5, listelenen: 1-5
Investigation of the cutting forces and surface roughness in milling carbon fiber reinforced polymer composite material
(Inst Za Kovinske Materiale I in Tehnologie, 2016)
In this study, milling of a carbon-fiber-reinforced polymer composite material (CFRP) was investigated experimentally using various carbide end mills. the input parameters included the spindle speed, feed rate and cutting ...
Experimental study on machinability of pre-hardened Toolox 44 and Nimax mould steels
(Gazi Üniversitesi Mühendislik Mimarlık Fakültesi, 2021)
In this study, the machinability of Nimax and Toolox 44 materials, which are among the mould steels was investigated experimentally. Cutting experiments were carried out with PVD-AlCrN coated carbide end mill using three ...
Kokil kalıba döküm yöntemi ile üretilmiş Al-12Si-(0,02-1)Sr alaşımlarının CVD-TiCN/Al2O3/TiN kaplamalı kesici uç ile tornada işlenmesinde kesme kuvveti ve yüzey pürüzlülüğü üzerine deneysel çalışma
(Gazi Üniversitesi , Fen Bilimleri Enstitüsü, 2022)
In this study, three Al-12Si-Sr alloys containing different ratios (0.02; 0.1 and 1%) strontium (Sr) were
manufactured by the permanent mold casting method. The microstructures of the manufactured alloys were
determined ...
A performance comparison study of uncoated and TiAlN coated carbide end mill on machining of the Al-35Zn alloy
(Iop Publishing Ltd, 2018)
In this study, Al-35Zn alloy was produced by permanent mold casting. To investigate the cutting performance of uncoated and TiAlN coated carbide end mills on this alloy, a series of tests were carried out in the CNC vertical ...
Elyaf takviyeli polimer kompozit malzemelerin farklı delme yöntemleri ile delinmesinde kesme performansının değerlendirilmesi: Literatür Taraması
(2018)
Elyaf takviyeli polimer kompozit (ETPK) malzemeler, yüksek mukavemet ve sönümleme, hafiflik, düşük termal genleşme gibi mühendislik özelliklerinden dolayı uzay ve havacılık sanayisinde cıvatalı, perçinli ve pimli bağlantılarda ...