Ara
Toplam kayıt 17, listelenen: 1-10
Investigation of the cutting forces and surface roughness in milling carbon fiber reinforced polymer composite material
(Inst Za Kovinske Materiale I in Tehnologie, 2016)
In this study, milling of a carbon-fiber-reinforced polymer composite material (CFRP) was investigated experimentally using various carbide end mills. the input parameters included the spindle speed, feed rate and cutting ...
Experimental research on machinability characteristics of Al-9Si alloy: Effect of Sr and Mg additives
(Sage Publications, 2022)
In this study, the effects of strontium (Sr) and magnesium (Mg) elements in certain rates added to Al-9Si alloy manufactured using permanent mold casting technique on the structural, mechanical, and machinability properties ...
Current technologies for aluminum castings and their machinability
(Elsevier, 2021)
Metal casting is one of the leading production techniques for three-dimensional parts in manufacturing industry. The casting process consists of many stages such as design, determination of chemical composition (alloying), ...
Dry cutting: A sustainable machining technology
(Elsevier, 2021)
Conventional cutting fluids with flood cooling are used to reduce the heat generation during machining but at the cost of environmental degradation. The hydrocarbon-based conventional cutting fluids are harmful to the ...
Experimental study on machinability of pre-hardened Toolox 44 and Nimax mould steels
(Gazi Üniversitesi Mühendislik Mimarlık Fakültesi, 2021)
In this study, the machinability of Nimax and Toolox 44 materials, which are among the mould steels was investigated experimentally. Cutting experiments were carried out with PVD-AlCrN coated carbide end mill using three ...
Kokil kalıba döküm yöntemi ile üretilmiş Al-12Si-(0,02-1)Sr alaşımlarının CVD-TiCN/Al2O3/TiN kaplamalı kesici uç ile tornada işlenmesinde kesme kuvveti ve yüzey pürüzlülüğü üzerine deneysel çalışma
(Gazi Üniversitesi , Fen Bilimleri Enstitüsü, 2022)
In this study, three Al-12Si-Sr alloys containing different ratios (0.02; 0.1 and 1%) strontium (Sr) were
manufactured by the permanent mold casting method. The microstructures of the manufactured alloys were
determined ...
Effects of different cutting methods for electrical steel sheets on performance of induction motors
(Sage Publications Ltd, 2018)
In this study, by cutting electrical steel stator laminations, one of the most important components of electrical machines by different cutting methods, the effects of these cutting methods on motor efficiency are investigated. ...
A performance comparison study of uncoated and TiAlN coated carbide end mill on machining of the Al-35Zn alloy
(Iop Publishing Ltd, 2018)
In this study, Al-35Zn alloy was produced by permanent mold casting. To investigate the cutting performance of uncoated and TiAlN coated carbide end mills on this alloy, a series of tests were carried out in the CNC vertical ...
Elyaf takviyeli polimer kompozit malzemelerin farklı delme yöntemleri ile delinmesinde kesme performansının değerlendirilmesi: Literatür Taraması
(2018)
Elyaf takviyeli polimer kompozit (ETPK) malzemeler, yüksek mukavemet ve sönümleme, hafiflik, düşük termal genleşme gibi mühendislik özelliklerinden dolayı uzay ve havacılık sanayisinde cıvatalı, perçinli ve pimli bağlantılarda ...
Determination of delamination in drilling of carbon fiber reinforced carbon matrix composites/Al 6013-T651 stacks
(Elsevier Sci Ltd, 2020)
Delamination at the hole entrance and exit during drilling of the FRPs composites adversely affects the hole surface quality and engineering properties of this material. in this study, delamination occurrence in hole ...