Ara
Toplam kayıt 11, listelenen: 1-10
Aerosol filtration performance of nanofibrous mats produced via electrically assisted industrial-scale solution blowin
(Wiley, 2021)
Highly efficient polyamide 6 (PA6)-based nanofibrous air filter media was developed for particulate matter (PM) removal in the ambient atmosphere. The PA6 nanofibrous mats exhibited 85% PM0.3 capture performance at a cost ...
Developing centrifugal spun thermally cross-linked gelatin based fibrous biomats for antibacterial wound dressing applications
(Wiley, 2021)
Fibrous materials obtained from natural polymers, such as gelatin, have been used in medical applications due to their biocompatibility and biodegradability. Herein, free-standing durable fibrous gelatin biomats with ...
Centrifugally spun silica (SiO2) nanofibers for high-temperature air filtration
(Taylor & Francis Inc, 2019)
In this study, silica-based nanofibers were produced via centrifugal spinning (C-spin) and subsequent calcination. the produced heat resistant media was challenged with NaCl nanoparticles to investigate their filtration ...
Carbon-based foams: Preparation and applications
(Woodhead Publ Ltd, 2019)
....
Effect of air pressure on nanofiber production in solution blowing method
(Gazi Univ, Fac Engineering Architecture, 2020)
In this study, effect of air pressure on nanofiber diameter and morphology was studied for solution blowing technique. A computational fluid dynamics (CFD) analysis was realized via ANSYS (R) Fluent software, and the results ...
Nitrogen-doped TiO2 fibers for visible-light-induced photocatalytic activities
(Elsevier Sci Ltd, 2020)
Nitrogen-doped TiO2 fibers (N-TiO2 Fs) were successfully and efficiently fabricated using titanium diisopropoxide bis(acetylacetonate) and polyvinylpyrrolidone (PVP) as a carrier polymer and nitrogen source via centrifugal ...
A comparative study on SiO2 nanofiber production via two novel non-electrospinning methods: Centrifugal spinning vs solution blowing
(Elsevier, 2020)
A comparative study on the production of nanofibrous silica (SiO2) mats via facile and innovative non-electro-spinning routes, solution blowing (SB) and centrifugal spinning (CS), and their subsequent calcination is ...
Solution-blown PA6-and PVDF-based nanofibrous composite mats for aerosol filtration
(Springer, 2023)
Particulate matter (PM), especially with particle diameter below 2.5 mu m (PM2.5), causes serious impacts on human health. Nanofibrous filters are one of the most widely investigated materials for the filtration of PM2.5 ...
Production of ultrafine PVDF nanofiber-/banonet-based air filters via the electroblowing technique by employing PEG as a pore-forming agent
(PMC, 2023)
Particles with diameters smaller than 2.5 μm (PM2.5)
can penetrate the respiratory system and have negative impacts on
human health. Filter media with a porous surface and nanofiber/
nanonet structure demonstrate superior ...
Enhancing filtration performance of submicron particle filter media through bimodal structural design
(Wiley, 2023)
Depth filtration is a widely utilized mechanism for submicron aerosol filtration using disposable filter cartridges and facemasks. The filter media should be carefully engineered to reach high filtration efficiency and ...