Ara
Toplam kayıt 12, listelenen: 1-10
Aerosol filtration performance of nanofibrous mats produced via electrically assisted industrial-scale solution blowin
(Wiley, 2021)
Highly efficient polyamide 6 (PA6)-based nanofibrous air filter media was developed for particulate matter (PM) removal in the ambient atmosphere. The PA6 nanofibrous mats exhibited 85% PM0.3 capture performance at a cost ...
Developing centrifugal spun thermally cross-linked gelatin based fibrous biomats for antibacterial wound dressing applications
(Wiley, 2021)
Fibrous materials obtained from natural polymers, such as gelatin, have been used in medical applications due to their biocompatibility and biodegradability. Herein, free-standing durable fibrous gelatin biomats with ...
Solution blown nanofibrous air filters modified with glass microparticles
(Sage Publications Inc, 2021)
High-pressure drop and lower dust holding capacity reduce the performance of nanofibrous air filters. For that reason, this study was carried out to form filters with high-quality factor and high dust holding capacity, ...
Clogging performance of micro/nanofibrous laminated composite air filter media
(Sage Publications, 2022)
The performance of fibrous filter media relies on factors such as particle capture efficiency, pressure drop and clogging time. Fiber diameter, porosity and packing density are important web-based factors to improve final ...
Centrifugally spun silica (SiO2) nanofibers for high-temperature air filtration
(Taylor & Francis Inc, 2019)
In this study, silica-based nanofibers were produced via centrifugal spinning (C-spin) and subsequent calcination. the produced heat resistant media was challenged with NaCl nanoparticles to investigate their filtration ...
Carbon-based foams: Preparation and applications
(Woodhead Publ Ltd, 2019)
....
Effect of air pressure on nanofiber production in solution blowing method
(Gazi Univ, Fac Engineering Architecture, 2020)
In this study, effect of air pressure on nanofiber diameter and morphology was studied for solution blowing technique. A computational fluid dynamics (CFD) analysis was realized via ANSYS (R) Fluent software, and the results ...
Nitrogen-doped TiO2 fibers for visible-light-induced photocatalytic activities
(Elsevier Sci Ltd, 2020)
Nitrogen-doped TiO2 fibers (N-TiO2 Fs) were successfully and efficiently fabricated using titanium diisopropoxide bis(acetylacetonate) and polyvinylpyrrolidone (PVP) as a carrier polymer and nitrogen source via centrifugal ...
A comparative study on SiO2 nanofiber production via two novel non-electrospinning methods: Centrifugal spinning vs solution blowing
(Elsevier, 2020)
A comparative study on the production of nanofibrous silica (SiO2) mats via facile and innovative non-electro-spinning routes, solution blowing (SB) and centrifugal spinning (CS), and their subsequent calcination is ...
Solution-blown PA6-and PVDF-based nanofibrous composite mats for aerosol filtration
(Springer, 2023)
Particulate matter (PM), especially with particle diameter below 2.5 mu m (PM2.5), causes serious impacts on human health. Nanofibrous filters are one of the most widely investigated materials for the filtration of PM2.5 ...