Yazar "Savaşkan, Temel" için listeleme
-
Effect of heat treatment on mechanical and wear properties of Zn-40Al-2Cu-2Si alloy
Savaşkan, Temel; Azaklı, Zeki; Hekimoğlu, Ali Paşa (Elsevier, 2021)In order to determine the effect of heat treatment on the mechanical and wear properties of Zn-40Al-2Cu-2Si alloy, different heat treatments including homogenization followed by air-cooling (H1), homogenization followed ... -
Effect of isothermal treatment on mechanical and tribological properties of alloy Zn – 40% Al – 2% Cu – 2% Si
Savaşkan, Temel; Hekimoğlu, Ali Paşa; Azaklı, Zeki (Springer, 2023)The effect of isothermal exposure at temperatures from 100°C to 250°C for 8 hours on the structure, mechanical and tribological properties of the Zn – 40% Al – 2% Cu – 2% Si alloy produced by chill casting is studied. The ... -
Effect of working conditions on the lubricated wear behavior of Zn-40Al-2Cu-2Si alloy in the as-aast and T6 heat-treated states
Savaşkan, Temel; Hekimoğlu, Ali Paşa; Azaklı, Zeki; Çalış, Merve (ASME, 2022)In order to determine the effect of working conditions on the lubricated wear behavior of Zn-40Al-2Cu-2Si alloy in the as-cast and T6 heat-treated states, its tribological properties were studied at different oil flowrates, ... -
Effect of zn addition on the structural, mechanical and tribological properties of al12si (en ac 44100) alloy
Hekimoğlu, Ali Paşa; Sönmezışık, Ahsen; Zimitoğlu, Süha; Hacıosmanoğlu, Murat; Savaşkan, Temel (Springer, 2024)In this study, the effects of 10 wt% Zn addition on the microstructure and properties of Al12Si EN AC 44100 alloy were investigated. For this purpose, EN AC 44100 and EN AC 44100 + 10 wt%Zn alloys were fabricated by permanent ... -
Effects of contact pressure and sliding speed on the unlubricated friction and wear properties of Zn-15Al-3Cu-1Si alloy
Hekimoğlu, Ali Paşa; Savaşkan, Temel (Taylor & Francis Inc, 2016)The unlubricated friction and wear properties of Zn-15Al-3Cu-1Si alloy were studied over a range of contact pressure (1-5 MPa) and sliding speed (0.5-2.5 ms(-1)) for a sliding distance of 2,500m using a block-on-disc type ... -
Investigation of the effects of T5 and T6 heat treatments on the structural, mechanical, and tribological properties of Zn-40Al-2Cu-0.1Sr alloy
Hekimoğlu, Ali Paşa; Hacıosmanoğlu, Murat; Tellioğlu, Murat; Savaşkan, Temel (Gazi Üniversitesi, 2024)To assess the effects of T5 and T6 heat treatments on the structural, mechanical, and tribological properties of Zn-40Al-2Cu-0.1Sr alloy several ingots were produced by the permanent mold casting. The structure and properties ... -
Lubricated wear characteristics of Zn-15Al-3Cu-1Si alloy and SAE 660 bronze
Hekimoğlu, Ali Paşa; Savaşkan, Temel (Gazi Univ, Fac Engineering Architecture, 2018)In this study, lubricated friction and wear characteristics of Zn-15Al-3Cu-1Si alloy were investigated using a block-on-disc type test machine. Friction and wear tests were carried out at different oil flow rates (0.25 - ... -
Relationships between mechanical and tribological properties of Zn-15Al-based ternary and quaternary alloys
Savaşkan, Temel; Hekimoğlu, Ali Paşa (Carl Hanser Verlag, 2016)Five ternary Zn-15Al-(1- 5)Cu and six quaternary Zn15Al-3Cu-(0.5-3) Si alloys were prepared by permanent mold casting for this work. Their unlubricated sliding friction and wear properties were investigated at a pressure ... -
Zn-15Al-3Cu-1Si alaşımı ve SAE 660 bronzunun yağlı durumdaki aşınma karakteristikleri
Hekimoğlu, Ali Paşa; Savaşkan, Temel (2018)Bu çalışmada Zn-15Al-3Cu-1Si alaşımının yağlı çalışma koşullarındaki sürtünme ve aşınma davranışlarıblok-disk tipi bir deney düzeneği kullanılarak incelendi. Sürtünme ve aşınma deneyleri farklı yağ debileri(0,25-3,0 cm3h-1), ...
