Kurum Yazarı "Duymuş, Zeynep Yeşil" İçin Listeleme
-
Comparison of temperature change among different adhesive resin cement during polymerization process
Alkurt, Murat; Duymuş, Zeynep Yeşil; Gündoğdu, Mustafa; Karadaş, Muhammet (Medknow Publications, 2017)Purpose: The aim of this study was to assess the intra-pulpal temperature changes in adhesive resin cements during polymerization. Materials and Methods: Dentin surface was prepared with extracted human mandibular third ... -
Comparison of the effects of cytotoxicity and antimicrobial activities of self-adhesive, eugenol and noneugenol temporary and traditional cements on gingiva and pulp living cells
Alkurt, Murat; Duymuş, Zeynep Yeşil; Şişci, Tugay (Sage Publications India Pvt Ltd, 2019)Aims and objectives: the aim of this in vitro study was to investigate the antibacterial and cytotoxic effect of cements: zinc polycarboxylate, glass ionomer, self-adhesive resin cement, eugenol-containing and eugenol-free ... -
The effect of adjustment and finishing procedure on roughness, strength, and phase transformation of monolithic zirconia
Öztürk, Işıl; Çağlar, İpek; Duymus, Zeynep Yeşil (Springer, 2022)Objective To evaluate the effect of adjustment and finishing procedures and thermal aging of monolithic zirconia on the surface roughness, phase transformation, and flexural strength. Material and methods One hundred ... -
Effect of ceramic surface treatments on the bond strength of different composite resins
Yanıkoğlu, Nuran; Duymuş, Zeynep Yeşil; Alkurt, Murat (Taylor & Francis Ltd, 2018)This study was aimed to observe the relationship between the different surface treatments and the bond strength of both composite based adhesive cement and zirconia ceramic. Thirty-two zirconia ceramic discs were fabricated ... -
The effect of denture cleansers on surface roughness and bond strength of a denture base resin
Ateş, Sabit Melih; Çağlar, İpek; Özdoğan, Alper; Duymuş, Zeynep Yeşil (Taylor & Francis Ltd, 2017)Purpose: the purpose of this study was to evaluate the effect of different denture cleaning regimens on surface roughness of denture base material and bond strength to hard reline material.Materials and methods: 100 ... -
Effect of different bleaching agents on the surface roughness and color stability of feldspathic porcelain
Özdoğan, Alper; Duymuş, Zeynep Yeşil; Özbayram, Özlem; Bilgiç, Rabia (Universidade Estadual Paulista, Institute of Science and Technology of Sao Jose dos Campos, 2019)Objective: The aim of this study was to evaluate the effect of different bleaching agents on the surface roughness and color stability of feldspathic porcelain. Material and Methods: In this study, totally 40 disc-shaped ... -
The effect of different surface pretreatments on the bond strength of veneering resin to polyetheretherketone
Ateş, Sabit Melih; Çağlar, İpek; Duymuş, Zeynep Yeşil (Taylor & Francis Ltd, 2018)The aim of this study was to investigate the effect of different surface pretreatment methods on the bond strength of veneering resin to polyetheretherketone (PEEK) based aesthetic frameworks. Five hundred and forty PEEK ... -
Effect of different surface treatments on the repair bond strength of resin composites with titanium
Korkmaz, Fatih Mehmet; Ateş, Sabit Melih; Çağlar, İpek Şatıroğlu; Baygın, Özgül; Duymuş, Zeynep Yeşil (Taylor & Francis Ltd, 2019)The purpose of this study was to evaluate the effect of different surface treatment combinations on the bonding of composite resins to NiCr and titanium alloys after thermal cycling. Square-shaped specimens (10 mm x 10 mm ... -
The effect of disinfection methods on C. albicans in three types of denture base materials
Akyıldız, Gülşah; Duymuş, Zeynep Yeşil; Karaoğlu, Şengül Alpay; Bozdeveci, Arif (Revista Chimie SRL., 2023)This study aimed to evaluate the efficacy of disinfectant solutions on Candida albicans (C. albicans) for different types of denture materials. A total of 144 specimens (10x10x2 mm) were obtained from three different ... -
The effect of laboratory procedures and repeated-glazing on color of metal-ceramic restoration
Özdemir, Hatice; Duymuş, Zeynep Yeşil (Wolters Kluwer Medknow Publications, 2019)Background: Routine laboratory procedures and repeated glazed effect the final color of metal-ceramic restorations (MCRs). Clinicians wonder if the color changes after routine laboratory procedures and repeated glazed is ... -
Effect of repair resin type and surface treatment on the repair strength of heat-polymerized denture base resin
Alkurt, Murat; Duymuş, Zeynep Yeşil; Gündoğdu, Mustafa (Mosby-Elsevier, 2014)Statement of Problem. Acrylic resin denture fracture is common in prosthodontic practice. When fractured denture bases are repaired, recurrent fractures frequently occur at the repair surface interface or adjacent areas. ... -
Effect of sandblasting, silica coating, and erbium: Yttrium-aluminum-garnet laser treatment on the shear bond strength of self-adhesive resin cement to alumina ceramics
Çağlar, İpek; Ateş, Sabit Melih; Boztoprak, Yalçın; Aslan, Yılmaz Umut; Duymuş, Zeynep Yeşil (Wolters Kluwer Medknow Publications, 2018)Objective: the aim of this study was to investigate the different surface treatments on the bond strength of self-adhesive resin cement to high-strength ceramic. Materials and Methods: Ninety aluminum oxide ceramic ... -
Effect of sealer coating and storage methods on the surface roughness of soft liners
Kutlu, İlknur Usta; Yanıkoğlu, Nuran Dinçkal; Kul, Esra; Duymuş, Zeynep Yeşil; Sağsöz, Nurdan Polat (Mosby-Elsevier, 2016)Statement of problem. A soft lining is applied under a removable prosthesis for various reasons. the porosity of the lining material may increase colonization by microorganisms and cause tissue inflammation. Purpose. the ... -
Effect of staining and bleaching on the microhardness, surface roughness and color of different composite resins
Karataş, Özcan; Gül, Pınar; Akgül, Nilgün; Çelik, Neslihan; Gündoğdu, Mustafa; Duymuş, Zeynep Yeşil; Seven, Nilgün (Weoclaw Medical University, 2021)Background. There are studies that examined the effect of staining on the surface properties of composite resins, using different solutions and bleaching applications. However, the effect of both staining and bleaching on ... -
Effect of surface treatments on the bond strength of soft denture lining materials to an acrylic resin denture base
Gündoğdu, Mustafa; Duymuş, Zeynep Yeşil; Alkurt, Murat (Mosby-Elsevier, 2014)Statement of problem. Adhesive failure between acrylic resin and resilient liner material is commonly encountered in clinical practice. Purpose. the purpose of this study was to evaluate the effect of different surface ... -
The effect of ultrafast fiber laser application on the bond strength of resin cement to titanium
Ateş, Sabit Melih; Korkmaz, Fatih Mehmet; Çağlar, İpek Şatıroğlu; Duymuş, Zeynep Yeşil; Turgut, Sedanur; Bağış, Elif Arslan (Springer London Ltd, 2017)The purpose of this study was to investigate the effect of ultrafast fiber laser treatment on the bond strength between titanium and resin cement. A total of 60 pure titanium discs (15 mm x 2 mm) were divided into six test ... -
The effect of various polishing systems on surface roughness and phase transformation of monolithic zirconia
Çağlar, İpek; Ateş, Sabit Melih; Duymuş, Zeynep Yeşil (Korean Acad Prosthodontics, 2018)PURPOSE. the purpose of this study was to evaluate and compare three polishing systems on the surface roughness and phase transformation of monolithic zirconia. MATERIALS AND METHODS. 100 disk shaped specimens (10 mm ... -
The effect of veneering on the marginal fit of CAD/CAM-generated, copy-milled, and cast metal copings
Ateş, Sabit Melih; Duymuş, Zeynep Yeşil; Çağlar, İpek; Holoğlu, Bilal (Springer Heidelberg, 2017)This in vitro study investigated the marginal fit of metal and zirconia copings before and after veneering on dies with shoulder/chamfer (s/c) finish lines. Using CAD/CAM, ten (n = 10) each s/c zirconia (NZ) copings and ... -
Effects of multiple firings on the microstructure of zirconia and veneering ceramics
Alkurt, Murat; Duymuş, Zeynep Yeşil; Gündoğdu, Mustafa (Japanese Soc Dental Materials Devices, 2016)The aim of study was to evaluate the effects of multiple firings on the microstructures of zirconia and two ceramics. Vita VM9 (VMZ) and Cerabien ZR (C-Z) ceramics on a zirconia framework and zirconia without veneering ... -
Effects of two-body wear on microfill, nanofill, and nanohybrid restorative composites
Yılmaz, Efe; Sadeler, Recep; Duymuş, Zeynep Yeşil; Öcal, Mustafa (Wolters Kluwer Medknow Publications, 2017)Background: The purpose of this study was to investigate two-body wear resistance and hardness of different three modern composite materials. Methods: In the conditions recommended by the manufacturer five pieces were ...