Başlık için Mühendislik Fakültesi listeleme
Toplam kayıt 847, listelenen: 226-245
-
Effect of mineralogical composition of clinoptilolite-bearing tuffs on their performance as a natural pozzolan in cementitious systems
(Techno-Press, 2021)In this study, pozzolanic reactivity and strength activity of zeolitic tuffs containing similar amount of zeolitic phase (clinoptilolite) and different types and amounts of impurities were examined in order to understand ... -
The effect of nanofluid usage on electricity consumption in thermoelectric refrigeration application: an experimental study
(2022)This study investigates the effects of nanofluid use in thermoelectric refrigerators on electricity consumption. A water-cooled block was placed on the hot surface of the TEC, and a water-to-air heat ... -
Effect of Nb doping on structural, electrical and optical properties of spray deposited SnO2 thin films
(Academic Press Ltd- Elsevier Science Ltd, 2013)Nb doped SnO2 transparent conducting thin films were deposited by spray pyrolysis method. Microstructural, morphological, electrical and optical properties of the films were investigated as a function of niobium (Nb) doping, ... -
The effect of occupational choice on job satisfaction and occupational accidents in the construction sector: A case study on Rize and Çorum in Turkey
(Dynamic Academy Yazılım İnşaat San. Tic. Ltd. Şti., 2021)The construction sector is a sector that employs a significant amount of employees in Turkey and appeals to many branches of work and professions. In Turkey, the construction sector ranks first in the statistics ... -
Effect of PCA on nanosized ulexite material prepared by mechanical milling
(Springer Heidelberg, 2017)Raw ulexite (U-3 mm) mineral used as a initial material was milled by using mechanical milling method, the milling time of which is from 0 to 8 h. Particle size, morphology, elemental and crystal structure measurements of ... -
The effect of solid boriding time on the structure, hardness and corrosion properties of AISI 5140 steel
(Maik Nauka/Interperiodica/Springer, 2020)In this study, AISI 5140 steel samples were borided in an electrical furnace at a temperature of 950 degrees C for 4, 6 and 8 h. Structural examinations, hardness measurement and corrosion tests were performed to determine ... -
Effect of strontium additions on the microstructural and mechanical properties of Al-17Si-4Cu-0.6Mg-3Zn (B390+2 wt%Zn) alloy
(Springer, 2022)One Al-17Si-4Cu-0.6Mg-3Zn (B390 + 2 wt%Zn) alloy and five B390 + 2 wt% Zn-Sr alloys were produced by permanent mold casting method. Microstructural evaluations were carried out with microscopic techniques. The phases of ... -
Effect of strontium and magnesium additions on the microstructure and mechanical properties of Al-12Si alloys
(Korean Inst Metals Materials, 2019)In this study, a binary Al-12Si, eight ternary Al-12Si-Sr, and six quaternary Al-12Si-0.1Sr-(0.2-1)Mg alloys were produced by permanent mold casting. It was observed that microstructure of the binary alloy consisted of the ... -
Effect of strontium on the microstructure, mechanical, and tribological properties of the Zn-40Al-2Cu alloy
(Springer, 2023)Zn-40Al-2Cu and Zn-40Al-2Cu-0.1Sr alloys were produced by permanent mold casting method. The microstructure, mechanical properties and wear resistance of the produced alloys were investigated. Microstructural examinations ... -
Effect of the specimen length on ultrasonic P-wave velocity in some volcanic rocks and limestones
(Pergamon-Elsevier Science Ltd, 2015)Ultrasonic P-wave velocity (UPV) is commonly used in different fields such as civil, mining, geotechnical, and rock engineering. One of the significant parameters which affect the UPV of rock materials is likely to be the ... -
The effect of the substitution of Cu for Mn on magnetic and magnetocaloric properties of Ni50Mn34In16
(Elsevier Science Bv, 2014)The influence of Cu substitution for Mn on magnetic and magnetocaloric properties has been investigated in Ni50Mn34-xCuxIn16 (x=1.3 and 1.6) Hensler alloys by using calorimetric and magnetic measurements. the temperature ... -
The effect of Total flowrate on the cooling performance of swirling coaxial impinging jets
(Springer, 2019)Thermal management ability of swirling coaxial confined impinging air jets (SCCIAJ) are experimentally studied for different total flowrate. the coaxial structure of the jet is provided by a nozzle which is a cylindrical ... -
Effect of using hybrid nanofluids as a coolant on the thermal performance of portable thermoelectric refrigerators
(Elsevier, 2022)This study investigated the effect of using hybrid nanofluids as a refrigerant in portable thermoelectric refrigerator applications on thermal performance. For this purpose, a cooling cabinet with an internal volume of 36 ... -
Effect of working conditions on the lubricated wear behavior of Zn-40Al-2Cu-2Si alloy in the as-aast and T6 heat-treated states
(ASME, 2022)In order to determine the effect of working conditions on the lubricated wear behavior of Zn-40Al-2Cu-2Si alloy in the as-cast and T6 heat-treated states, its tribological properties were studied at different oil flowrates, ... -
Effect of zinc content and cutting tool coating on the machinability of the Al-(5-35) Zn alloys
(Korean Inst Metals Materials, 2020)In this study, Al-5Zn, Al-15Zn, Al-25Zn and Al-35Zn alloys containing 5, 15, 25 and 35 wt% Zn, respectively were produced by permanent mold casting. Their microstructures and mechanical properties were investigated using ... -
Effectiveness of soil-structure interaction and dynamic characteristics on cable-stayed bridges subjected to multiple support excitation
(Korean Soc Steel Construction-Kssc, 2018)The purpose of the study is to determine the effects of multiple support excitations (MSE) and soil-structure interaction (SSI) on the dynamic characteristics of cable-stayed bridges founded on pile foundation groups. in ... -
Effects of aging state on the low-cycle fatigue properties of 2024 aluminum alloy
(Elsevier, 2024)To reveal the effects of aging state on the low-cycle fatigue (LCF) performance of 2024 Al alloy, LCF experiments were conducted on the 2024 Al alloy with three aging states (underaged (UA), peak-aging (PA) and overaged ... -
Effects of ceramic based pastes on electrochemical performance of solid oxide fuel cells
(Elsevier Sci Ltd, 2014)Various commercially available anode and cathode materials are investigated as the anode and cathode contact paste, respectively, for solid oxide fuel cells. in order to obtain a printable paste, chosen materials are mixed ... -
Effects of contact pressure and sliding speed on the unlubricated friction and wear properties of Zn-15Al-3Cu-1Si alloy
(Taylor & Francis Inc, 2016)The unlubricated friction and wear properties of Zn-15Al-3Cu-1Si alloy were studied over a range of contact pressure (1-5 MPa) and sliding speed (0.5-2.5 ms(-1)) for a sliding distance of 2,500m using a block-on-disc type ... -
Effects of Covid-19 outbreak on environment and renewable energy sector
(Springer, 2021)Many articles have been written in the medical field related to the Covid-19 outbreak that has surrounded the World and killed many people. However, its environmental and energy impacts have not been sufficiently studied. ...