Başlık için Mühendislik Fakültesi listeleme
Toplam kayıt 847, listelenen: 239-258
-
Effect of working conditions on the lubricated wear behavior of Zn-40Al-2Cu-2Si alloy in the as-aast and T6 heat-treated states
(ASME, 2022)In order to determine the effect of working conditions on the lubricated wear behavior of Zn-40Al-2Cu-2Si alloy in the as-cast and T6 heat-treated states, its tribological properties were studied at different oil flowrates, ... -
Effect of zinc content and cutting tool coating on the machinability of the Al-(5-35) Zn alloys
(Korean Inst Metals Materials, 2020)In this study, Al-5Zn, Al-15Zn, Al-25Zn and Al-35Zn alloys containing 5, 15, 25 and 35 wt% Zn, respectively were produced by permanent mold casting. Their microstructures and mechanical properties were investigated using ... -
Effectiveness of soil-structure interaction and dynamic characteristics on cable-stayed bridges subjected to multiple support excitation
(Korean Soc Steel Construction-Kssc, 2018)The purpose of the study is to determine the effects of multiple support excitations (MSE) and soil-structure interaction (SSI) on the dynamic characteristics of cable-stayed bridges founded on pile foundation groups. in ... -
Effects of aging state on the low-cycle fatigue properties of 2024 aluminum alloy
(Elsevier, 2024)To reveal the effects of aging state on the low-cycle fatigue (LCF) performance of 2024 Al alloy, LCF experiments were conducted on the 2024 Al alloy with three aging states (underaged (UA), peak-aging (PA) and overaged ... -
Effects of ceramic based pastes on electrochemical performance of solid oxide fuel cells
(Elsevier Sci Ltd, 2014)Various commercially available anode and cathode materials are investigated as the anode and cathode contact paste, respectively, for solid oxide fuel cells. in order to obtain a printable paste, chosen materials are mixed ... -
Effects of contact pressure and sliding speed on the unlubricated friction and wear properties of Zn-15Al-3Cu-1Si alloy
(Taylor & Francis Inc, 2016)The unlubricated friction and wear properties of Zn-15Al-3Cu-1Si alloy were studied over a range of contact pressure (1-5 MPa) and sliding speed (0.5-2.5 ms(-1)) for a sliding distance of 2,500m using a block-on-disc type ... -
Effects of Covid-19 outbreak on environment and renewable energy sector
(Springer, 2021)Many articles have been written in the medical field related to the Covid-19 outbreak that has surrounded the World and killed many people. However, its environmental and energy impacts have not been sufficiently studied. ... -
Effects of different cutting methods for electrical steel sheets on performance of induction motors
(Sage Publications Ltd, 2018)In this study, by cutting electrical steel stator laminations, one of the most important components of electrical machines by different cutting methods, the effects of these cutting methods on motor efficiency are investigated. ... -
Effects of extractive ammonia pretreatment on the ultrastructure and glycan composition of corn stover
(Frontiers Media Sa, 2019)Lignocellulosic biomass is highly recalcitrant and requires a pretreatment step to improve the enzyme accessibility and fermentable sugar yields during enzymatic hydrolysis. Our previous studies demonstrated the rearrangement ... -
The effects of freeze-thaw cycles and block size on the use of the Gümüşhane Granitoid (Gümüşhane/Turkey) as building stone
(Springer, 2021)The present study aims to examine the usability of the Gümüşhane Granitoid as a building stone taking into consideration the short-term freeze-thaw cycles and mean block volume. A total of 180 specimens were used in the ... -
Effects of mineral additives and age on microstructure evolution and durability properties of sand-reinforced cementitious mine backfills
(Elsevier, 2022)Cementitious paste/mine backfill (CMB/CPB) is a creative way to proficiently decrease the sum of sulfidic tailings. However, considering them as minor raw material and inadequacies in their gradation, OPC (costly and ... -
Effects of Na doping on CdS thin films and n-CdS/p-Si solar cells via chemical bath deposition method
(Korean Assoc Crystal Growth, Inc, 2017)Un-doped and Na doped CdS thin films were deposited by chemical bath deposition method. the effects of Na doping on structural, optical and electrical properties of CdS thin films and n-CdS/p-Si heterojunction were ... -
Effects of size reduction on the magnetic and magnetocaloric properties of NdMn2Ge2 nanoparticles prepared by high-energy ball milling
(Wiley-V C H Verlag Gmbh, 2015)A nanostructured NdMn2Ge2 sample is prepared by a high-energy ball-milling technique. the structural and magnetic properties of ball-milled nanopowder have been studied by high-resolution transmission electron microscopy ... -
Effects of the center of linear heating position on natural convection and entropy generation in a linearly heated square cavity
(Pergamon-Elsevier Science Ltd, 2020)Entropy generation and heat transfer caused by the natural convection in a square cavity, which is linearly heated from one of the vertical walls and uniformly cooled from the other vertical wall, is studied numerically. ... -
Effects of the equatorial electrojet on FM-based passive radar systems
(Ieee-Inst Electrical Electronics Engineers Inc, 2017)Passive radar systems operate by employing cooperative or noncooperative radio signals in the environment in order to sense remote targets. This particular feature of passive radar systems provides unique opportunities to ... -
Effects of the stiffness of an inclusion on the mechanical behavior of an aluminum alloy plate with a lateral notch
(Techno-Press Original language, 2024)This study delves into the interaction dynamics between lateral notches and inclusions, providing valuable insights for more effective engineering of structural components. By employing the finite element method, the ... -
Effects of titanium addition on structural, mechanical, tribological, and corrosion properties of Al-25Zn-3Cu and Al-25Zn-3Cu-3Si alloys
(Elsevier, 2020)To investigate the effect of grain refinement on the material properties of recently developed Al-25Zn-3Cu based alloys, Al-25Zn-3Cu, Al-25Zn-3Cu-0.01Ti, Al-25Zn-3Cu-3Si and Al-25Zn-3Cu-3Si-0.01Ti alloys were produced by ... -
Effects of ultraviolet light on B-doped CdS thin films prepared by spray pyrolysis method using perfume atomizer
(Elsevier Science Bv, 2013)Boron doped CdS thin films were deposited by spray pyrolysis method using perfume atomizer. the effects of ultraviolet light on the structural, optical and electrical properties of B-doped CdS thin films were investigated ... -
Effects of WEDM and AWJ cutting methods on induction motor efficiency and total magnetic losses: Experimental design and response surface methodology
(Elsevier, 2023)In this study, the effect of cutting electrical steel laminations using abrasive water jet (AWJ) and wire electrical discharge machining (WEDM) techniques on 5.5 kW induction motor efficiency (MEfficiency) and total magnetic ... -
Efficiency improvement for a DC-DC quadratic power boost converter by applying a switch turn-off lossless snubber structure based on zero voltage switching
(Kaunas Univ Technology, 2018)So as to keep the converter in small size, high switching frequencies are normally used. As a result, in higher frequencies, switching losses seriously affect the efficiency. Current and voltage stresses on power switch ...
