Başlık için Mühendislik Fakültesi listeleme
Toplam kayıt 847, listelenen: 297-316
-
Estimating the compressive strength of fly ash added concrete using artificial neural networks
(Manisa Celal Bayar Üniversitesi Fen Bilimleri Enstitüsü, 2022)The aim of this study is to develop an artificial intelligence that predicts the compressive strength of fly ash substituted concretes using material mixing ratios. Within the scope of the study, 5 different fly ash mixed ... -
Estimation of the monthly based hourly wind speed characteristics and the generated power characteristics for developing bidding strategies in an actual wind farm: a case study
(Springer Heidelberg, 2013)This manuscript proposes a new approach for the estimation of the monthly based hourly wind speed characteristics and the generated power characteristics in an actual wind farm. the proposed approach uses the probability ... -
Etkin epoklar ile motor hayaline dayalı EEG işaretlerinin sınıflandırma doğruluğunun artırılması
(2018)Beyin bilgisayar arayüzleri (BBA) sadece beyinde üretilen işaretleri kullanarak çeşitli elektronik cihazları kullanmayı olanaklı hale getiren sistemlerdir. Bu sistemlerin yüksek başarımlı olabilmesi için bu işaretlerden ... -
Evaluation of corrosion performance of AZ31 Mg alloy in physiological and highly corrosive solutions
(American Chemical Society, 2023)Resorbable Mg and Mg alloys have gained significant interest as promising biomedical materials. However, corrosion of these alloys can lead to premature reduction in their mechanical properties, and therefore their corrosion ... -
Evaluation of in-duct UV-C lamp array on air disinfection: A numerical analysis
(Taylor & Francis Inc, 2020)In-duct ultraviolet germicidal irradiation systems are effective systems that are used in disinfection of pathogenic particles transported by air that moving through the ventilation systems. Proper design of these systems ... -
Evaluation of structural and optical properties of Mn-Doped ZnO thin films synthesized by Sol-Gel technique
(Springer, 2012)Undoped ZnO and Mn-doped ZnO (MZO) films with 0.25, 0.50, and 0.75 mol pct were synthesized onto glass substrates by sol-gel spin-coating technique, and the effects of Mn on structural, morphologic, and optical properties ... -
Evaluation of the contact problem of functionally graded layer resting on rigid foundation pressed via rigid punch by analytical and numerical (FEM and MLP) methods
(Springer, 2022)In this paper, frictionless contact problem for a functionally graded (FG) layer is considered. The FG layer is subjected to load with a rigid punch and the FG layer is bonded on a rigid foundation. Analysis of this contact ... -
Evaluation of the effect on the permanent tooth germ and the adjacent teeth by finite element impact analysis in the traumatized primary tooth
(Wiley, 2024)Background: One of the primary concerns in the paediatric emergencies is traumatic dental injuries. Objective: This study aimed to create trauma in primary teeth and reveal its effects finite element analysis. Design: ... -
Evaluation of waste human hair as graphene oxide and examination of some characteristic properties
(TUBITAK, 2020)In this study, graphene oxide was synthesized from activated carbon obtained from waste hair for the first time using Modified Hummers method. the Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy ... -
Examination of analytical and finite element solutions regarding contact of a functionally graded layer
(Techno-Press, 2020)In this study, the continuous and discontinuous contact problems of functionally graded (FG) layer resting on a rigid foundation were considered. the top of the FG layer was loaded by a distributed load. It was assumed ... -
An examination of nanoparticle colemanite mineral added warm mix asphalt
(Elsevier Sci Ltd, 2020)Warm mix asphalt (WMA) technologies which enable production at lower temperatures in pavement engineering have been developing. in the present study, the efficiency of colemanite mineral, which the largest reserve is located ... -
Examining the contact problem of a functionally graded layer supported by an elastic half-plane with the analytical and numerical methods
(Wiley, 2024)This study offers a comparative study of the analytical and numerical methods for investigating a contact problem. The contact problem comprises a functionally graded layer supported by a half-plane and loaded with a ... -
Exergetic analysis of a vertical ground-source heat pump system with wall heating/cooling
(Springer International Publishing, 2014)The present study deals with an exergetic analysis and assessment of a Vertical Ground-Source Heat Pump System (VGSHP) combined with a Wall Heating System (WHCS) in a building. This study is an experimental investigation ... -
Exergetic and exergo-economic analysis of a turboprop engine: a case study for CT7-9C
(Inderscience Enterprises Ltd, 2012)The turboprop engine has played an important role in short haul commuter and military transport aircraft where high speed is not critical. It may provide the aviation sector with one of the most significant means of achieving ... -
Exergetic evaluation of a high-pressure hydrogen production system
(Springer International Publishing, 2014)This study presents exergetic assessment of a high-pressure hydrogen production system (HPS). The system considered in this study includes a high-pressure proton exchange membrane (PEM) electrolyzer, two heat exchangers, ... -
Exergetic performance comparison of air and hydrogen gas flowing through the annular curved duct
(Pergamon-Elsevier Science Ltd, 2018)The main objective of this study is to parametrically compare the exergetic performance of air and hydrogen gas flow through the curved annular duct. For this purpose, it is assumed that, i) air and hydrogen are considered ... -
Exergetic performance of a low bypass turbofan engine at takeoff condition
(Springer International Publishing, 2014)In this article, exergetic methodology is applied for a low bypass turbofan engine at maximum power setting. The engine is a low-bypass (0.96–1) turbofan engine and its variants fitted to the 737-100/200 all comprise six ... -
Exergetic sustainability assessment of a HALE UAV using dodecene fuel
(Inderscience Enterprises Ltd, 2016)Exergetic sustainability performances of a high altitude long endurance (HALE) unmanned aerial vehicle (UAV), having a single turbofan engine and using dodecene as its fuel were investigated all along its flight profile, ... -
Exergetic sustainability improvement potentials of a hydrogen fuelled turbofan engine UAV by heating its fuel with exhaust gasses
(Pergamon-Elsevier Science Ltd, 2016)Exergetic sustainability parameters such as, exergy efficiency, waste exergy ratio, environmental effect factor and exergetic sustainability index were investigated for an UAV having a turbofan engine for the case its ... -
Exergetic sustainability indicators as a tool in commercial aircraft: a case study for a turbofan engine
(Taylor & Francis Inc, 2015)This paper focuses on the exergetic sustainability indicators of a medium-range commercial aircraft engine for constant reference environment and ground running conditions. First, a detailed exergy analysis of turbofan ...
