Başlık için Mühendislik Fakültesi listeleme
Toplam kayıt 847, listelenen: 325-344
-
Experimental and parametric studies on the effect of waste cooking oil methyl ester with diesel fuel in compression ignition engine
(Elsevier, 2022)Diesel engine discharge characteristics are primarily influenced by fuel qualities, combustion chamber type, and injection settings. This study used combinations of biodiesel, waste cooking oil, and diesel fuel to do a ... -
Experimental and simulated investigation of a single-phase transformerless H5 inverter topology
(Tafila Technical University, 2024)This paper aims to simulate and experimentally apply a single-phase transformerless H5 inverter topology. The H5 inverter topology is simulated in MATLAB/Simulink environment as both off-grid and grid-connected. The ... -
Experimental and statistical analysis of the effects of punching and laser cutting methods on induction motor efficiency and total magnetic losses in silicon lamination sheets
(Elsevier, 2023)In this study, M400-50A electrical steel laminations (ESLs) used in electrical machines were cut with punching and laser methods and the effect of these cutting methods on the efficiency and total losses of induction motors ... -
Experimental and theoretical examination of the energy performance and CO2 emissions of room air conditioners utilizing natural refrigerant R290 as a substitute for R22
(Springer, 2023)The purpose of this research is to analyze the performance of an air conditioner that uses natural refrigerant R290 both analytically and experimentally. The feasibility of R290 for R22 air conditioner is examined thoroughly. ... -
An experimental case study on the effect of condenser geometry in a refrigerator: Sub-cooling and coefficient of performance issues
(Elsevier, 2023)The study aims to establish the role of the condenser and condenser geometry in the performance enhancement of the future generation of mid-sized refrigerators. Experimental and statistical methods were used to examine the ... -
Experimental investigation and a new predictive tool for thermal performance of pulsating heat pipes
(Springer, 2023)In the present study, binary-fluid-charged uniform and nonuniform flat plate closed loop pulsating heat pipes (FP-CLPHP) are experimentally investigated in comparative manner, and a novel correlation with innovative point ... -
Experimental investigation and application of soft computing models for predicting flow energy loss in arc-shaped constrictions
(IWA Publishing, 2024)This investigation focuses on flow energy, a crucial parameter in the design of water structures such as channels. The research endeavors to explore the relative energy loss (Delta E-AB/E-A) in a constricted flow path of ... -
Experimental investigation and force analysis of flat-plate type pulsating heat pipes having ternary mixtures
(Pergamon-Elsevier Science Ltd., 2021)Comprehensive experiments are conducted to analyze complex heat transfer characteristics and flow nature of a flat plate closed loop pulsating heat pipe charged with ternary mixtures. Consecutive channels of the heat pipe ... -
Experimental investigation of coaxial impinging air jets
(Pergamon-Elsevier Science Ltd, 2018)This study experimentally investigates hydrodynamical and thermal characteristics of coaxial confined impinging turbulent air jets. Various values of the dimensionless nozzle-to-plate distances and dimensionless flowrate ... -
Experimental investigation of flow boiling in single minichannels with low mass velocities
(Pergamon-Elsevier Science Ltd, 2018)Flow boiling characteristics in a single minichannel with the aspect ratio of 2 (1.8 mm width and 0.9 mm height) are studied experimentally. Experiments are conducted for different values of the wall heat flux (in the range ... -
Experimental investigation of heat transfer characteristics and wall pressure distribution of swirling coaxial confined impinging air jets
(Pergamon-Elsevier Science Ltd, 2018)In the present study, swirling coaxial confined impinging turbulent air jets issuing from a novel designed nozzle is studied experimentally. Heat transfer characteristics and pressure distribution on the impingement plate ... -
Experimental performance assessment of a novel insulation plaster as an energy-efficient retrofit solution for external walls: A key building material towards low/zero carbon buildings
(Elsevier, 2023)Thermal insulation plasters have become the focus of attention in the building sector. Among the most important reasons for this is the high thermal energy losses of the buildings. Since conventional briquettes used in ... -
Experimental research on machinability characteristics of Al-9Si alloy: Effect of Sr and Mg additives
(Sage Publications, 2022)In this study, the effects of strontium (Sr) and magnesium (Mg) elements in certain rates added to Al-9Si alloy manufactured using permanent mold casting technique on the structural, mechanical, and machinability properties ... -
Experimental studies and comprehensive computational investigations on composites-based phase change material for battery thermal management systems in electric vehicles
(Elsevier, 2024)Battery Thermal Management System plays a significant role in maintaining the health of the batteries for the long run. Active-based cooling technologies, due to the lesser thermal conductivity of air and parasitic losses, ... -
Experimental studies of latent heat storage based solar air heater for space heating: A comparative analysis
(Elsevier, 2023)There are numerous applications of solar energy technology, among which an air heating system is commonly used for space heating, wood seasoning, industrial drying, etc. Previous research focuses on the bulk usage of ... -
Experimental study for in vitro prostate cancer treatment with microwave ablation and pulsed electromagnetic field
(Taylor & Francis Inc., 2024)This paper presents the findings of a comprehensive study exploring the synergistic effects arising from the combination of microwave ablation and pulsed electromagnetic field (PEMF) therapy on prostate cancer cells. The ... -
Experimental study of single-phase fluid flow and heat transfer characteristics in rectangular microchannels
(2018)In this study, single-phase laminar flow of deionized water through microchannel heat sinks is investigated experimentally. Heat sinks including twenty-nine parallel rectangular channels have been used as the test samples. ... -
Experimental study on machinability of pre-hardened Toolox 44 and Nimax mould steels
(Gazi Üniversitesi Mühendislik Mimarlık Fakültesi, 2021)In this study, the machinability of Nimax and Toolox 44 materials, which are among the mould steels was investigated experimentally. Cutting experiments were carried out with PVD-AlCrN coated carbide end mill using three ... -
An experimental study on microstructural, mechanical and machinability properties of as-cast and heat-treated al-7Si-mg alloy
(Springer, 2024)The automotive industry is constantly striving for targets for the development of lightweight materials for less fuel consumption and carbon emissions. For this purpose, lighter and higher-performance Al-Si alloys with ... -
Exploring the link between ultrasonic and strength behavior of cementitious mine backfill by considering pore structure
(Elsevier, 2023)Understanding the porosity/pore linkage and strength properties of cementitious mine backfill (CMB) is essential for the design of underground mining filling. Adoption of new production techniques in parallel with the ...
