Ara
Toplam kayıt 19, listelenen: 1-10
Use of the point load index in estimation of the strength rating for the RMR system
(Pergamon-Elsevier Science Ltd, 2015)
The Rock Mass Rating (RMR) system is a worldwide reference for design applications involving estimation of rock mass properties and tunnel support. in the RMR system, Uniaxial Compressive Strength (UCS) is an important ...
Utilization of the limit equilibrium and finite element methods for the stability analysis of the slope debris: An example of the Kalebasi District (NE Turkey)
(Pergamon-Elsevier Science Ltd, 2015)
The stability of the slope debris in residential area of the Kalebasi District (Ozkurtun-Gumushane) was investigated using the Limit Equilibrium (LE) and Finite Element Shear-Strength Reduction (FE-SSR) methods. Along the ...
Effect of the specimen length on ultrasonic P-wave velocity in some volcanic rocks and limestones
(Pergamon-Elsevier Science Ltd, 2015)
Ultrasonic P-wave velocity (UPV) is commonly used in different fields such as civil, mining, geotechnical, and rock engineering. One of the significant parameters which affect the UPV of rock materials is likely to be the ...
Understanding the mechanism of slope failure on a nearby highway tunnel route by different slope stability analysis methods: a case from NE Turkey
(Springer Heidelberg, 2016)
The Arakli tunnel is located in the eastern Black Sea region where the most mass movement is observed in Turkey. Following the tunnel entrance portal excavations in basaltic tuffs on nearby the Konakonu residential area, ...
Stability assessment of high-steep cut slope debris on a landslide (Gumushane, NE Turkey)
(Springer Heidelberg, 2016)
The objective of this study was to examine the effects on the stability of slope debris of planned slope excavations around the vicinity of Gumushane Imam-Hatip High School in NE Turkey. To assess the geotechnical properties ...
Utilizing the strength conversion factor in the estimation of uniaxial compressive strength from the point load index
(Springer Heidelberg, 2016)
The strength conversion factor (k) is the ratio between the uniaxial compressive strength (UCS) and the point load index (PLI). It has been used to estimate the UCS from the PLI since the 1960s. Many researchers have ...
2D- and 3D-FEM modeling of rock masses at the Şilenkar viaduct site (NE Turkey) with regard to bearing capacity
(Springer, 2021)
The aim of this research was to examine the bearing capacity features of the rock masses at the site of Şilenkar viaduct which is a part of the highway substitution project at the Yusufeli Dam construction in NE Turkey. ...
The effects of freeze-thaw cycles and block size on the use of the Gümüşhane Granitoid (Gümüşhane/Turkey) as building stone
(Springer, 2021)
The present study aims to examine the usability of the Gümüşhane Granitoid as a building stone taking into consideration the short-term freeze-thaw cycles and mean block volume. A total of 180 specimens were used in the ...
Rize Taşlıdere Havzasında heyelan kontrolü: Örnek olay incelemesi, Kireçhane ve Kırklartepe yöreleri
(2021)
Rize ilindeki orman tahribatı ve arazinin koruma-kullanma tekniği dikkate alınmadan kullanılması
il genelindeki heyelan riskini artırmaktadır. Bu çalışmanın amacı Rize Taşlıdere Havzası, Kireçhane
ve Kırklartepe yöreleri ...
Geotechnical assessment of a slope stability problem in the Citlakkale residential area (Giresun, NE Turkey)
(Springer Heidelberg, 2017)
Because of the rapidly growing population, new settlement areas are required, and finding an appropriate location is always difficult, especially in mountainous areas. in these regions, efficient use of the existing ...