İnşaat Mühendisliği Bölümü Koleksiyonu
Recent Submissions
-
Seismic performance assessment of steel buildings equipped with a new semi-active displacement-dependent viscous damper
(World Scientific Publishing, 2024)This paper investigates numerically the seismic behavior of multi-degree-of-freedom (MDOF) systems with novel 2-4 direction and displacement-dependent (2-4DDD) and 2-4 Displacement-Velocity- (2-4DVD) Semi-Active (SA) ... -
Stability analysis of porous FG sandwich plates under thermomechanical loads via integral HySDT
(Springer, 2024)The thermomechanical buckling of imperfect sandwich plates made of functionally graded material (FGM) is addressed analytically in this study. A novel hyperbolic four-variable integral shear deformation theory is used to ... -
Use of submarine tailings disposal as alternative tailings management system
(MDPI, 2024)The importance of the mining/milling industry in increasing the growth level and welfare of countries is quite high. However, at the end of mining/milling processes, huge amounts of waste (often known as tails) are inevitably ... -
The importance of early strength in structural applications: Obsidian-based geopolymer mortars and silica fume substitution study
(Wiley, 2024)Geopolymer mortars, which cause less CO2 emissions than concrete and its raw material cement, are an innovative, environmentally friendly and sustainable building material. Geopolymers are formed by activating silica and ... -
Analyzing microscopic structure and macroscopic strength behavior of cement-based tail fills incorporating fiber by X-ray CT scanning technique
(Elsevier, 2024)Using structurally layered cementitious tailings backfill (CTB) as synthetic roof material for down-cut-and-fill mining can save cost while ensuring mechanical properties. In the current investigation, polypropylene fiber ... -
Effect of wrapping thickness and type on reinforced bridge piers: A numerical study
(Budapest University Technology Economics, 2024)This research paper investigates the impact of wrapping thickness and type on reinforced bridge piers through a numerical study. The Incesu bridge, located in the Ardanu & ccedil; district of Artvin province, was selected ... -
Numerical simulation of supercritical flow in sudden contractions flumes
(IWA Publishing, 2024)In this research, the effect of sudden non-continuous contraction on the energy dissipation of supercritical flows was numerically investigated. This study focuses on energy dissipation in sudden contractions in supercritical ... -
Mechanical and microstructural properties of mortars: Obsidian powder effect
(Yildiz Technical University, 2024)Concrete has been the world's most produced and utilized building material for years due to its economic and easy accessibility. However, it attracts attention due to the CO2 emitted from cement, the raw material of concrete, ... -
The seismic response evaluation of an existing multi-span reinforced concrete highway bridge in the presence of linear and nonlinear viscous dampers
(Springer Nature, 2024)It’s crucial to keep bridges safe and operational all the time. Before or after an earthquake, they may require immediate seismic retrofitting. In this situation, adopting both isolation systems and viscous dampers could ... -
Influence of alkaline agents with different contents on strength features, energy dissipation and microscopic behavior of cement-based high‑sulfur tailings fill
(Elsevier, 2024)As high‑sulfur tails encompass abundant pyrite (FeS2), it is easy to form acidic/leachate waters under the action of water and air, which is opposed to cement-based tail fill (CTF)’s strength development. Therefore, the ... -
Energy harvesting estimation from vibration of chopped fiber rod-reinforced microbeams with piezoelectric patch based on five parameter-surface-strain gradient Beam Model
(World Stientific Publishing, 2024)During the last years, the design and production of self-powered engineering structures gained extensive attention due to the shortage of nonrenewable energy resources and the increase in fossil fuel prices. To this end, ... -
Nonlinear poro-thermo-forced vibration in curved sandwich magneto-electro-elastic shells under hygrothermal environment
(Springer, 2024)This research employs a multiple scales perturbation approach to evaluate the nonlinear wave propagation behaviors of a doubly curved sandwich composite piezoelectric shell with a flexible core in a hygrothermal environment. ... -
Predicting mechanical properties in geopolymer mortars, including novel precursor combinations, through XGBoost method
(Springer, 2024)Concrete is the most widely used material in the building industry due to its affordability, durability, and strength. However, considering carbon emissions, it is believed that concrete will be replaced by geopolymers in ... -
Effect of content of defluorinated solid waste on macroscopic strength and microstructural evolution of cemented tail filling composites
(Elsevier, 2024)Solid waste created by the ferrous mining industry has a major number of notable differences. The deficiency of recognition of solid waste features is the key factor limiting its discarding and reuse. In this paper, cemented ... -
Heavy aggregate and different admixtures effect on pavings: pyrite, corundum and water-retaining polymer
(Pontificia Universidad Catolica de Chile, Escuela de Construccion Civil, 2024)Concrete pavings are widely used in the construction industry as flooring for decorative and structural purposes in the gardens, parks, and roads of America, and Europe. In the present study, the effects of pyrite, corundum, ... -
Formability behavior of AH-32 shipbuilding steel strengthened by friction stir process
(Elsevier, 2024)Ships are built by bringing materials into various forms and then joining them. Although materials such as wood, composite materials, polyethylene, and aluminum alloys are used in shipbuilding, it is known that commercial ... -
Geopolymer mortars having glassy materials considering mechanical and microstructural features
(Elsevier, 2024)In comparison with ordinary Portland cements, geopolymer-based cements are now gaining prominence as an eco-friendly substitute to decline CO2 emissions in the course of OPC manufacturing. In this study, mechanical/microstructural ... -
Effect of 3D printed skeleton shapes on strength behavior, stress evolution and microstructural response of cement-based tailings backfills
(Elsevier, 2024)The inherent brittle behavior of cement-based tail backfill (CTB) poses some challenges that can significantly impact the safety and effectiveness of underground mining operations. Due to its propensity for abrupt and ... -
Multi-method examination of contact mechanics in orthotropic layers under gravity
(Elsevier, 2024)Analyzing the behavior of intelligent unconventional materials under diverse contact scenarios, in comparison to conventional materials, is a critical step in the initial design of engineering systems. This paper presents ... -
Examining the contact problem of a functionally graded layer supported by an elastic half-plane with the analytical and numerical methods
(Wiley, 2024)This study offers a comparative study of the analytical and numerical methods for investigating a contact problem. The contact problem comprises a functionally graded layer supported by a half-plane and loaded with a ...