Effect of friction stir process on hole expansion behavior of dual phase steel

dc.contributor.authorAktarer, Semih Mahmut
dc.contributor.authorAcar, Doğan
dc.contributor.authorKüçükömeroğlu, Tevfik
dc.date.accessioned2023-09-12T11:08:35Z
dc.date.available2023-09-12T11:08:35Z
dc.date.issued2023
dc.departmentRTEÜ, Teknik Bilimler Meslek Yüksekokulu, Motorlu Araçlar ve Ulaştırma Teknolojileri Bölümü
dc.description.abstractThe influence of the friction stir process (FSP) on the hole expansion formability of dual-phase 600 steel was examined by experimental and finite element analyses. Due to the microstructure of refining ferrite, martensite, and bainite, the yield strength and tensile strength increased after FSP by 95% and 63%, respectively. FSP led to the formation of (101) || ND and (111) || RD texture components in the processed zone. The observation of (111) || RD texture components in the FSPed steel resulted in an increment in the plastic strain ratio from 0.86 to 0.98. FSP provided a 20% improvement in the hole expansion ratio. The microstructural refinement and crystallographic texture played an important role in this increase. The FSP contributed to the increase in the hole expansion formability capability by delaying the crack formation during hole expansion and by causing the hole to fail at a higher load. It has been observed by experimental and finite element (FE) simulation results that the highest circumferential stress occurs at the hole edge where the main crack is formed. The FE simulation predictions agree with less than 2% error with the experimental observations.
dc.identifier.citationAktarer, S.M., Acar, D. & Küçükömeroğlu, T. (2023). Effect of Friction Stir Process on Hole Expansion Behavior of Dual Phase Steel. Journal of Materials Engineering and Performance. https://doi.org/10.1007/s11665-023-08565-2
dc.identifier.doi10.1007/s11665-023-08565-2
dc.identifier.issn1059-9495
dc.identifier.issn1544-1024
dc.identifier.scopus2-s2.0-85166906389
dc.identifier.scopusqualityQ2
dc.identifier.urihttps://doi.org/10.1007/s11665-023-08565-2
dc.identifier.urihttps://hdl.handle.net/11436/8300
dc.identifier.wosWOS:001044248000001
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorAktarer, Semih Mahmut
dc.language.isoen
dc.publisherSpringer
dc.relation.ispartofJournal of Materials Engineering and Performance
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectCrystallographic texture
dc.subjectDual phase steel
dc.subjectFriction stir process
dc.subjectFinite element analysis
dc.subjectHole expansion test
dc.titleEffect of friction stir process on hole expansion behavior of dual phase steel
dc.typeArticle

Dosyalar

Orijinal paket

Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
aktarer-2023.pdf
Boyut:
7.5 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Full Text / Tam Metin

Lisans paketi

Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama: