Konu "Surface roughness" için WoS İndeksli Yayınlar Koleksiyonu listeleme
Toplam kayıt 14, listelenen: 1-14
-
The effect of denture cleansers on surface roughness and bond strength of a denture base resin
(Taylor & Francis Ltd, 2017)Purpose: the purpose of this study was to evaluate the effect of different denture cleaning regimens on surface roughness of denture base material and bond strength to hard reline material.Materials and methods: 100 ... -
Effect of staining and bleaching on the microhardness, surface roughness and color of different composite resins
(Weoclaw Medical University, 2021)Background. There are studies that examined the effect of staining on the surface properties of composite resins, using different solutions and bleaching applications. However, the effect of both staining and bleaching on ... -
The effect of various polishing systems on surface roughness and phase transformation of monolithic zirconia
(Korean Acad Prosthodontics, 2018)PURPOSE. the purpose of this study was to evaluate and compare three polishing systems on the surface roughness and phase transformation of monolithic zirconia. MATERIALS AND METHODS. 100 disk shaped specimens (10 mm ... -
Effects of contact pressure and sliding speed on the unlubricated friction and wear properties of Zn-15Al-3Cu-1Si alloy
(Taylor & Francis Inc, 2016)The unlubricated friction and wear properties of Zn-15Al-3Cu-1Si alloy were studied over a range of contact pressure (1-5 MPa) and sliding speed (0.5-2.5 ms(-1)) for a sliding distance of 2,500m using a block-on-disc type ... -
Effects of hardener type, urea usage and conditioning period on the quality properties of particleboard
(Elsevier Sci Ltd, 2014)The effects of hardener type (ammonium chloride, ammonium sulphate and aluminium sulphate), urea usage (with urea and without urea), and conditioning period (one day and one month) of the particleboard on the physical ... -
Evaluation of color stability and surface roughness of bulk-fill resin composites and nanocomposites
(Galenos Yayincilik, 2017)Objective: the purpose of this study was to evaluate the color stability and surface roughness of four bulk-fill resin composites (SonicFill, Filtek Bulk Fill Flowable, X-tra fil, Filtek Bulk Fill Posterior) and three ... -
Experimental research on machinability characteristics of Al-9Si alloy: Effect of Sr and Mg additives
(Sage Publications, 2022)In this study, the effects of strontium (Sr) and magnesium (Mg) elements in certain rates added to Al-9Si alloy manufactured using permanent mold casting technique on the structural, mechanical, and machinability properties ... -
Experimental study on machinability of pre-hardened Toolox 44 and Nimax mould steels
(Gazi Üniversitesi Mühendislik Mimarlık Fakültesi, 2021)In this study, the machinability of Nimax and Toolox 44 materials, which are among the mould steels was investigated experimentally. Cutting experiments were carried out with PVD-AlCrN coated carbide end mill using three ... -
An experimental study on microstructural, mechanical and machinability properties of as-cast and heat-treated al-7Si-mg alloy
(Springer, 2024)The automotive industry is constantly striving for targets for the development of lightweight materials for less fuel consumption and carbon emissions. For this purpose, lighter and higher-performance Al-Si alloys with ... -
In vitro effects of fluoride, hydroxyapatite, and bromelain-containing toothpaste types on surface roughness of different restorative materials
(Sage Publications, 2021)Aim: To examine the effects of fluoride, hydroxyapatite, and bromelain-containing toothpaste types on the surface roughness of nanohybrid, nanofilled, flowable, and bulk-fill composites; conventional, light-curing, and ... -
An in vitro evaluation of the effect of various adhesives and surface treatments on bond strength of resin cement to polyetheretherketone
(Wiley, 2019)Purpose To investigate the effect of various surface pretreatments and adhesive systems on bond strength of resin cement to polyetheretherketone (PEEK). Materials and Methods 360 PEEK specimens were divided into 4 groups ... -
Investigation of the cutting forces and surface roughness in milling carbon fiber reinforced polymer composite material
(Inst Za Kovinske Materiale I in Tehnologie, 2016)In this study, milling of a carbon-fiber-reinforced polymer composite material (CFRP) was investigated experimentally using various carbide end mills. the input parameters included the spindle speed, feed rate and cutting ... -
Machinability properties of Al-7Si, Al-7Si-4Zn and Al-7Si-4Zn-3Cu alloys
(Springer Heidelberg, 2020)Al-7Si, Al-7Si-4Zn, Al-7Si-4Zn-3Cu alloys were produced by permanent mold casting method to investigate the effects of copper and zinc additions on the machinability properties of Al-7Si alloy. the structural and mechanical ... -
Performance evaluation of different carbide inserts in turning of newly developed Al-12Si-0.1Sr alloyLeistungsbewertung verschiedener Hartmetalleinsatze beim Drehen einer neu entwickelten Al-12Si-0.1Sr-Legierung
(Wiley, 2023)An Al-12Si-0.1Sr alloy ingot was manufactured using a permanent mold casting technique. The microstructure and mechanical properties of this alloy were researched. Effects of different cutting conditions (cutting speed-V: ...