Bölüm "RTEÜ, Mühendislik ve Mimarlık Fakültesi, İnşaat Mühendisliği Bölümü" İnşaat Mühendisliği Bölümü Koleksiyonu için listeleme
Toplam kayıt 160, listelenen: 1-20
-
2D and 3D numerical simulations of a reinforced landslide: A case study in NE Turkey
(Indian Acad Sciences, 2020)The purpose of this study is to investigate the slope stability problem that occurred in the Ulubey (NE Turkey) during the construction of a hospital building and to propose a reliable support design. the borehole applications, ... -
2D- and 3D-FEM modeling of rock masses at the Şilenkar viaduct site (NE Turkey) with regard to bearing capacity
(Springer, 2021)The aim of this research was to examine the bearing capacity features of the rock masses at the site of Şilenkar viaduct which is a part of the highway substitution project at the Yusufeli Dam construction in NE Turkey. ... -
Additivity effect on properties of cemented coal fly ash backfill containing water-reducing admixtures
(Elsevier Ltd, 2021)Cemented coal fly ash backfill (CCB), a flowable structure of coal fly ash, binding agent and mixing water, has been often employed in mining operations to offer ground support as well as waste disposal solutions. An ... -
Admixture effects on the rheological/mechanical behavior and micro-structure evolution of alkali-activated slag backfills
(MDPI, 2023)Recently, alkali-activated slag (AAS) has attracted extensive attention in cemented paste backfill (CPB) due to its low cost/CO2 emissions and high strength benefits. However, a comprehensive analysis of the mechanical/rheological ... -
Analysis of continuous and discontinuous cases of a contact problem using analytical method and FEM
(Latin Amer J Solids Structures, 2015)In this paper, continuous and discontinuous cases of a contact problem for two elastic layers supported by a Winkler foundation are analyzed using both analytical method and finite element method. in the analyses, it is ... -
Analysis of strength and microstructural characteristics of mine backfills containing fly ash and desulfurized gypsum
(MDPI, 2021)The utilization of solid wastes (SWs) as a potential resource for backfilling is not only conducive to environmental protection but also reduces the surface storage of waste. Two types of SWs, including fly ash (FA) and ... -
Analysis of tensile mechanical characteristics of fibre reinforced backfill through splitting tensile and three-point bending tests
(Taylor & Francis Ltd., 2021)The cut-and-fill mining method is used in metalliferous mines thanks to backfilling instead of ore pillars. However, the stability of the artificial cemented tailings backfill (CTB) roof is one of the key influencing factors ... -
Analytical and finite element solution of a receding contact problem
(Techno-Press, 2015)In this paper, a receding contact problem for an elastic layer resting on two quarter planes is considered. the layer is pressed by a stamp and distributed loads. It is assumed that the contact surfaces are frictionless ... -
Analytical solution of a contact problem and comparison with the results from FEM
(Techno-Press, 2015)This paper presents a comparative study of analytical method and finite element method (FEM) for analysis of a continuous contact problem. the problem consists of two elastic layers loaded by means of a rigid circular punch ... -
Analyzing of continuous and discontinuous contact problems of a functionally graded layer: theory of elasticity and finite element method
(Taylor & Francis Ltd., 2023)Contact mechanics analysis is crucial because such problems often arise in engineering practice. When examining contact mechanics, the material property of the contacting components is a crucially significant aspect. It ... -
Analyzing the microstructure of cemented fills adding polypropylene-glass fibers with X-ray micro-computed tomography
(Elsevier, 2023)Fiber reinforced cementitious tailings backfill (FRCTB) is progressively employed in mining industry due to its high strength/stiffness-to-weight ratio. However, the wide use of the FRCTB technique requires further study ... -
Application of artificial neural networks in the analysis of the continuous contact problem
(Techno-Press, 2022)This paper investigates the artificial neural network (ANN) to predict the dimensionless parameters for contact pressures and contact lengths under the rigid punch, the initial separation loads, and the initial separation ... -
Artificial neural network calculations for a receding contact problem
(Techno-Press, 2020)This paper investigates the artificial neural network (ANN) to predict the dimensionless parameters for the maximum contact pressures and contact areas of a contact problem. Firstly, the problem is formulated and solved ... -
Assessment of different solution methods for receding contact problems in functionally graded layered mediums
(Elsevier, 2021)This paper presents a comparative study of different methods, such as the analytical method, finite element method (FEM), and multilayer perceptron (MLP) for analyzing a frictionless receding contact problem. The problem ... -
Assessment of rheological and sedimentation characteristics of fresh cemented tailings backfill slurry
(Taylor & Francis Ltd, 2020)Unreasonable choice of solid content (SC) and cement-to-tailings ratio (c/t), including pipeline networking system, will lead to some pipeline problems, such as blockage, wear, and rupture. Hence, this study deals with the ... -
Beach nourishment alternative assessment to constrain cross-shore and longshore sediment transport
(Elsevier Sci Ltd, 2016)A combined field and laboratory investigation was conducted to assess five options for creation of a recreational beach on a steep, armored shoreline on the eastern Black Sea coast. All designs incorporated a beach nourishment ... -
Bearing capacity and slope stability assessment of rock masses at the Subasi viaduct site, NE, Turkey
(Springer Heidelberg, 2018)This study investigates the bearing capacity of rock masses and stability of slopes at the Subasi viaduct site which is a part of the improvement project of the Artvin-Hopa government highway between KM 6 + 500 and 13 + ... -
Bending behavior and failure mode of cemented tailings backfill composites incorporating different fibers for sustainable construction
(Elsevier, 2021)Mechanical characteristics of cementitious materials with fiber reinforcement are different from non reinforced cementitious materials. The influence of fiber type and content, solid content, and cement to-tailings ratio ... -
Biomechanical analysis of odontoid and transverse atlantal ligament in humans with ponticulus posticus variation under different loading conditions: Finite element study
(Elsevier, 2022)Purpose: Ponticulus posticus (PP) is a variation of the bone bridge that appears in the first cervical vertebra and through which the vertebral artery passes. Odontoid fractures are common spinal bone fractures in older ... -
Capacity building for field inspections: A comprehensive assessment tool for monitoring structural integrity and sediment capture performance of T-head groins
(Elsevier Sci Ltd, 2016)Objectives of this study were to develop a field assessment tool (i.e., criteria and rubrics) which can be used during periodic inspections of T-head groins, specifically those constructed for controlling coastal erosion ...