Erişim şekli için "info:eu-repo/semantics/openAccess" İnşaat Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 54, listelenen: 1-20
-
Admixture effects on the rheological/mechanical behavior and micro-structure evolution of alkali-activated slag backfills
(MDPI, 2023)Recently, alkali-activated slag (AAS) has attracted extensive attention in cemented paste backfill (CPB) due to its low cost/CO2 emissions and high strength benefits. However, a comprehensive analysis of the mechanical/rheological ... -
Analysis of continuous and discontinuous cases of a contact problem using analytical method and FEM
(Latin Amer J Solids Structures, 2015)In this paper, continuous and discontinuous cases of a contact problem for two elastic layers supported by a Winkler foundation are analyzed using both analytical method and finite element method. in the analyses, it is ... -
Analysis of strength and microstructural characteristics of mine backfills containing fly ash and desulfurized gypsum
(MDPI, 2021)The utilization of solid wastes (SWs) as a potential resource for backfilling is not only conducive to environmental protection but also reduces the surface storage of waste. Two types of SWs, including fly ash (FA) and ... -
Analyzing the microstructure of cemented fills adding polypropylene-glass fibers with X-ray micro-computed tomography
(Elsevier, 2023)Fiber reinforced cementitious tailings backfill (FRCTB) is progressively employed in mining industry due to its high strength/stiffness-to-weight ratio. However, the wide use of the FRCTB technique requires further study ... -
Cementitious backfill with partial replacement of Cu-rich mine tailings by sand: rheological, mechanical and microstructural properties
(MDPI, 2023)The thinning of tailings gradation during ore processing leads to a sizeable fall in the strength of cementitious paste backfill (CPB), increases operational risks, and encourages researchers to use alternative economic ... -
Characterization of macro mechanical properties and microstructures of cement-based composites prepared from fly ash, gypsum and steel slag
(MDPI, 2022)Using solid wastes (SWs) as backfilling material to fill underground mined-out areas (UMOAs) solved the environmental problems caused by SWs and reduced the backfilling cost. In this study, fly ash (FA), gypsum and steel ... -
Characterization of strength and quality of cemented mine backfill made up of lead-zinc processing tailings
(Frontiers Media, 2021)Predicting the reactions of the backfill materials exposed to the effects of air and groundwater will eventually ensure an efficient and accurate mine fill system for sustainable mining operations. This paper reveals the ... -
Comparison of nonlinear static and dynamic analyses on A R/C building
(2013)In recent years, nonlinear calculation methods can be easily carried out by means of developing computer technologies. In this way, comparisons of the nonlinear methods have started to increase rapidly and more studies are ... -
Comparıson between numerıcal and analytıcal solutıons for the recedıng contact problem
(Yildiz Technical Univ, 2017)A finite element calculation has been utilized to investigate the plane symmetric double receding contact problem for a rigid stamp and two elastic layers. Elastic layers have different elastic constants and heights. the ... -
Consolidated effect of fiber-reinforcement and concrete strength class on mechanical performance, economy and footprint of concrete for pavement use
(Elsevier, 2021)The advancement in the tensile strength and ductility of plain concrete can minimize the quantity of materials required per unit strength to build eco-friendly structures. This paper compares the compressive and flexural ... -
Coupled longshore and cross-shore models for beach nourishment evolution at laboratory scale
(ASCE Library, 2008)A series of three-dimensional laboratory experiments on beach nourishment behavior are described and analyzed. The experiments were designed to isolate the influences of berm height, beachfill median grain size, wave height, ... -
Determination of natural radioactivity levels of some concretes and mineral admixtures in Turkey
(Asian Journal of Chemistry, 2014)Nine concrete samples with or without mineral admixtures have been analyzed for their naturally occurring radionuclide of Ra-226, Th-232 and K-40 using HPGe gamma spectrometry. Also, concrete raw materials such as aggregate, ... -
Doğu Karadeniz kıyılarında balıkçılık kıyı yapılarının sığlaşmasının incelenmesi
(2018)Doğu Karadeniz Bölgesi'nde, 2007 yılında tamamlanan Karadeniz Sahil Yolu'nun korunması ve kıyı erozyonunun engellenmesi maksadıyla T-mahmuz grupları ve tahkimatlar inşa edilmiştir. Balıkçılık, bölgenin en önemli geçim ... -
Doğu Karadeniz kıyılarında sel ve fırtınaların T-mahmuzlar üzerinde oluşturduğu hasarlar ve su kalitesi değişimlerine etkilerinin araştırılması
(2021)Bu çalışmada, deniz kıyılarının korunması, kıyının zamanla kumla dolması sonucu doğal bir plaj oluşturarak kıyının rehabilite edilmesi amacıyla çeşitli şekillerde inşa edilen mahmuzlar incelenmiştir. Bu inceleme esnasında ... -
The durability of high-strength concrete containing waste tire steel fiber and Ccal fly ash
(Hindawi, 2021)The demands for high-strength concrete (HSC) have been increasing rapidly in the construction industry due to the requirements of thin and durable structural elements. HSC is highly brittle. Therefore, to augment its ... -
Editorial: Advances in the design and implementation of cementitious backfills
(Frontiers Media, 2022)Backfill plays an essential role in the most modern mining industries worldwide. It is usually applied in the cementitious form to fill underground mined-out openings (stopes and/or voids) -
Effect of content and length of polypropylene fibers on strength and microstructure of cementitious tailings-waste rock fill
(MDPI, 2023)The mechanical strength properties of cemented tailings backfill are very important for the safe and environmentally friendly mining of mineral resources. To check the impact of polypropylene fiber on strength and ... -
Effect of different abutment materials on stress distribution in peripheral bone and dental implant system
(Yildiz Technical Univ, 2020)In this study, the effect of different abutment materials on the stress distribution in bone tissue around the dental implant was investigated using ANSYS packet program based on finite element method. the study aims to ... -
The effect of occupational choice on job satisfaction and occupational accidents in the construction sector: A case study on Rize and Çorum in Turkey
(Dynamic Academy Yazılım İnşaat San. Tic. Ltd. Şti., 2021)The construction sector is a sector that employs a significant amount of employees in Turkey and appeals to many branches of work and professions. In Turkey, the construction sector ranks first in the statistics ...