Yayın tarihi için İnşaat Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 180, listelenen: 21-40
-
Utilizing the strength conversion factor in the estimation of uniaxial compressive strength from the point load index
(Springer Heidelberg, 2016)The strength conversion factor (k) is the ratio between the uniaxial compressive strength (UCS) and the point load index (PLI). It has been used to estimate the UCS from the PLI since the 1960s. Many researchers have ... -
A receding contact problem between a functionally graded layer and two homogeneous quarter planes
(Springer Wien, 2016)In this paper, the plane problem of a frictionless receding contact between an elastic functionally graded layer and two homogeneous quarter planes is considered when the graded layer is pressed against the quarter planes. ... -
The investigation crack problem through numerical analysis
(Techno-Press, 2016)This paper presents a comparative study of finite element method (FEM) and analytical method for the plane problem of a layered composite containing an internal perpendicular crack in literature. the layered composite ... -
Stability analyses of submicron-boron mineral prepared by mechanical milling process in concrete roads
(Elsevier Sci Ltd, 2016)The main objective of this study is to investigate the possibility of utilizing nano/submicron sized boron mineral (colemanite) in Portland cement concrete. Colemanite was obtained from a mine in three different sizes as ... -
Comparıson between numerıcal and analytıcal solutıons for the recedıng contact problem
(Yildiz Technical Univ, 2017)A finite element calculation has been utilized to investigate the plane symmetric double receding contact problem for a rigid stamp and two elastic layers. Elastic layers have different elastic constants and heights. the ... -
Late Jurassic Magmatism and Stratigraphy in the Eastern Sakarya Zone, Turkey: Evidence for the Slab Breakoff of Paleotethyan Oceanic Lithosphere
(Univ Chicago Press, 2017)Middle-Late Jurassic Cimmerian events in Turkey have been actively discussed in the past three decades, but proposed tectonic models associated with magmatism, metamorphism, and stratigraphic features remain controversial. ... -
Effect of PCA on nanosized ulexite material prepared by mechanical milling
(Springer Heidelberg, 2017)Raw ulexite (U-3 mm) mineral used as a initial material was milled by using mechanical milling method, the milling time of which is from 0 to 8 h. Particle size, morphology, elemental and crystal structure measurements of ... -
Farklı tip betonarme binalar için geliştirilmiş hasar tahmin yöntemleri
(2017)Bu çalışmanın başlıca amacı; olası bir depremde meydana gelecek hasar ve kayıp olasılıklarını tahmin etmeye yarayan bir hasar tahmin metodu geliştirmektir. Bu amaçla; 11 farklı tip betonarme yapı için hasar olasılık ... -
Geotechnical assessment of a slope stability problem in the Citlakkale residential area (Giresun, NE Turkey)
(Springer Heidelberg, 2017)Because of the rapidly growing population, new settlement areas are required, and finding an appropriate location is always difficult, especially in mountainous areas. in these regions, efficient use of the existing ... -
Geotechnical investigations and remediation design for failure of tunnel portal section: a case study in northern Turkey
(Science Press, 2017)Mass movements are very common problems in the eastern Black Sea region of Turkey due to its climate conditions, geological, and geomorphological characteristics. High slope angle, weathering, dense rainfalls, and anthropogenic ... -
Environmental effects of t-shaped groins built on the eastern black sea coast on shore protection
(Parlar Scientific Publications (P S P), 2017)The construction of the double highway on the Black Sea Coast was initiated in 1998, completed in 2000. During the construction, T-shaped groins where were built to protect the shore. in this article, the contribution of ... -
Effectiveness of soil-structure interaction and dynamic characteristics on cable-stayed bridges subjected to multiple support excitation
(Korean Soc Steel Construction-Kssc, 2018)The purpose of the study is to determine the effects of multiple support excitations (MSE) and soil-structure interaction (SSI) on the dynamic characteristics of cable-stayed bridges founded on pile foundation groups. in ... -
A segmentation method for asphalt quality analysis
(Ieee, 2018)Asphalt quality is directly related to the proportions of the elements contained in the composition. Manual measurement of this ratio is a time-consuming and laborious process. in this work, a segmentation method is proposed ... -
Bearing capacity and slope stability assessment of rock masses at the Subasi viaduct site, NE, Turkey
(Springer Heidelberg, 2018)This study investigates the bearing capacity of rock masses and stability of slopes at the Subasi viaduct site which is a part of the improvement project of the Artvin-Hopa government highway between KM 6 + 500 and 13 + ... -
Shoreline changes in three groin fields on the Eastern Black Sea coast
(Parlar Scientific Publications (P S P), 2018)The objectives of this study are to evaluate and compare the sediment capture characteristics in three T-head groin systems. 31 T-head groins evaluated are located at Kiyicik (13), Eskipazar (10), and lyidere (8) which are ... -
Doğu Karadeniz kıyılarında balıkçılık kıyı yapılarının sığlaşmasının incelenmesi
(2018)Doğu Karadeniz Bölgesi'nde, 2007 yılında tamamlanan Karadeniz Sahil Yolu'nun korunması ve kıyı erozyonunun engellenmesi maksadıyla T-mahmuz grupları ve tahkimatlar inşa edilmiştir. Balıkçılık, bölgenin en önemli geçim ... -
Comparing the pozzolanic activity properties of obsidian to those of fly ash and blast furnace slag
(Elsevier Sci Ltd, 2018)The use of pozzolan in cement provides economic advantages and improves the physico-mechanical properties of cement. Fly ash and blast furnace slag are widely used in cement as pozzolanic materials. in this study, obsidian ... -
Transition coefficients between compressive strengths of samples with different shape and size in mass concrete and use of weight maturity method in dam construction
(Ernst & Sohn, 2019)Mass concrete (MC) is widely used in dam concretes due to their large aggregate grain diameters, low cement dosage, and low hydration temperatures. Monitoring of the hydration temperature and compressive strength is an ... -
Numerical analysis of the receding contact problem of two bonded layers resting on an elastic half plane
(Techno-Press, 2019)The present study deals with the numerical analysis of the symmetric contact problem of two bonded layers resting on an elastic half plane compressed with a rigid punch. in this context, Finite Element Method (FEM) based ... -
Geotechnical studies and primary support design for a highway tunnel: a case study in Turkey
(Springer Heidelberg, 2019)The main aim of this study is to appraise the geotechnical characteristic of the rock masses and to propose the proper support design for the Cankurtaran Tunnel project situated in NE Turkey. the exhaustive engineering ...