Diş Hekimliği Fakültesi by Institution Author "Ateş, Sabit Melih"
Now showing items 1-20 of 21
-
Artifact expression of polyetheretherketone in cone beam computed tomography: An in vitro study
Köse, Taha Emre; Günaçar, Dilara Nil; Ateş, Sabit Melih; Çağlar, İpek (Mosby-Elsevier, 2021)Statement of problem. Dental prosthetic materials can cause artifacts in cone beam computed tomography (CBCT) images, adversely affecting diagnostic quality, although the problem may be less with polyetheretherketone (PEEK). ... -
Comparison of marginal and internal fit of three-unit implant-supported fixed prosthetic substructures fabricated using CAD/CAM systems
Kayıkçı, Özlem; Ateş, Sabit Melih (Springer Heidelberg, 2021)Objective This study compared the marginal and internal fit of implant-supported fixed dentures fabricated using CAD/CAM systems. Materials and methods A lower jaw model representing partial edentulism was produced. Two ... -
The effect of denture cleansers on surface roughness and bond strength of a denture base resin
Ateş, Sabit Melih; Çağlar, İpek; Özdoğan, Alper; Duymuş, Zeynep Yeşil (Taylor & Francis Ltd, 2017)Purpose: the purpose of this study was to evaluate the effect of different denture cleaning regimens on surface roughness of denture base material and bond strength to hard reline material.Materials and methods: 100 ... -
Effect of different abutment materials on stress distribution in peripheral bone and dental implant system
Terzi, Merve; Güvercin, Yılmaz; Ateş, Sabit Melih; Sekban, Dursun Murat; Yaylacı, Murat (Yildiz Technical Univ, 2020)In this study, the effect of different abutment materials on the stress distribution in bone tissue around the dental implant was investigated using ANSYS packet program based on finite element method. the study aims to ... -
The effect of different surface pretreatments on the bond strength of veneering resin to polyetheretherketone
Ateş, Sabit Melih; Çağlar, İpek; Duymuş, Zeynep Yeşil (Taylor & Francis Ltd, 2018)The aim of this study was to investigate the effect of different surface pretreatment methods on the bond strength of veneering resin to polyetheretherketone (PEEK) based aesthetic frameworks. Five hundred and forty PEEK ... -
Effect of different surface treatments on the repair bond strength of resin composites with titanium
Korkmaz, Fatih Mehmet; Ateş, Sabit Melih; Çağlar, İpek Şatıroğlu; Baygın, Özgül; Duymuş, Zeynep Yeşil (Taylor & Francis Ltd, 2019)The purpose of this study was to evaluate the effect of different surface treatment combinations on the bonding of composite resins to NiCr and titanium alloys after thermal cycling. Square-shaped specimens (10 mm x 10 mm ... -
Effect of sandblasting, silica coating, and erbium: Yttrium-aluminum-garnet laser treatment on the shear bond strength of self-adhesive resin cement to alumina ceramics
Çağlar, İpek; Ateş, Sabit Melih; Boztoprak, Yalçın; Aslan, Yılmaz Umut; Duymuş, Zeynep Yeşil (Wolters Kluwer Medknow Publications, 2018)Objective: the aim of this study was to investigate the different surface treatments on the bond strength of self-adhesive resin cement to high-strength ceramic. Materials and Methods: Ninety aluminum oxide ceramic ... -
Effect of surface treatments on the bond strength of veneering ceramic to zirconia
Korkmaz, Fatih Mehmet; Bağış, Bora; Turgut, Sedanur; Ateş, Sabit Melih; Ayaz, Elif Aydoğan (Wichtig Publ, 2015)Aim: the purpose of this study was to evaluate the effect of different surface treatments on the bond strength of veneering ceramic to zirconia. Methods: Square (15 mm x 10 mm x 2 mm) zirconia specimens (n= 18) received ... -
The effect of ultrafast fiber laser application on the bond strength of resin cement to titanium
Ateş, Sabit Melih; Korkmaz, Fatih Mehmet; Çağlar, İpek Şatıroğlu; Duymuş, Zeynep Yeşil; Turgut, Sedanur; Bağış, Elif Arslan (Springer London Ltd, 2017)The purpose of this study was to investigate the effect of ultrafast fiber laser treatment on the bond strength between titanium and resin cement. A total of 60 pure titanium discs (15 mm x 2 mm) were divided into six test ... -
The effect of various polishing systems on surface roughness and phase transformation of monolithic zirconia
Çağlar, İpek; Ateş, Sabit Melih; Duymuş, Zeynep Yeşil (Korean Acad Prosthodontics, 2018)PURPOSE. the purpose of this study was to evaluate and compare three polishing systems on the surface roughness and phase transformation of monolithic zirconia. MATERIALS AND METHODS. 100 disk shaped specimens (10 mm ... -
The effect of veneering on the marginal fit of CAD/CAM-generated, copy-milled, and cast metal copings
Ateş, Sabit Melih; Duymuş, Zeynep Yeşil; Çağlar, İpek; Holoğlu, Bilal (Springer Heidelberg, 2017)This in vitro study investigated the marginal fit of metal and zirconia copings before and after veneering on dies with shoulder/chamfer (s/c) finish lines. Using CAD/CAM, ten (n = 10) each s/c zirconia (NZ) copings and ... -
Evaluation of the bond strength of different adhesive agents to a resin-modified calcium silicate material (TheraCal LC)
Karadaş, Muhammed; Cantekin, Kenan; Gümüş, Hüsniye; Ateş, Sabit Melih; Duymuş, Zeynep Yeşil (Wiley-Hindawi, 2016)This study evaluated the bond strength of different adhesive agents to TheraCal LC and mineral trioxide aggregate (MTA) and examined the morphologic changes of these materials with different surface treatments. A total of ... -
Farklı bağlayıcı ajanlar uygulanmış lazer sinterize kobalt-krom alaşımına kompozit bağlantısının incelenmesi
Ateş, Sabit Melih; Çağlar, İpek; Duymuş, Zeynep Yeşil (Türkiye Klinikleri Yayınevi, 2021)Amaç: Bu çalışmanın amacı 4 farklı bağlayıcı ajan uygulanmış lazer sinterize kobalt-krom (Co-Cr) alaşımına akışkan kompozitin makaslama bağlantı dayanımını incelemektir. Gereç ve Yöntemler: Toplam 100 adet lazer sinterize ... -
Farklı enerji seviyelerindeki Er:YAG lazer ile tamir edilen akrilik kaide rezininin bükülme dayanımı
Ateş, Sabit Melih; Çağlar, İpek; Duymuş, Zeynep Yeşil (Selcuk Universitesi Dişhekimliği Fakültesi, 2021)Amaç: Konvansiyonel akrilik kaide rezininin tamirinde, tamir yüzeylerine uygulanan farklı enerji seviyelerindeki Er:YAG lazerin kaide rezininin bükülme dayanımına etkisini incelemektir. Gereç ve Yöntemler: 80 adet ... -
Farklı içeceklerde bekletilen monolitik zirkonyanın renk stabilitesinin incelenmesi
Duymuş, Zeynep Yeşil; Öztürk, Işıl; Çağlar, İpek; Ateş, Sabit Melih (Atatürk Üniversitesi, 2021)Amaç: Bu çalışmanın amacı, günlük hayatta sıklıkla tüketilen farklı içeceklerin monolitik zirkonyanın renk stabilitesine etkisini değerlendirmektir. Materyal ve Metod: Disk şeklinde (10x1.2 mm) 40 adet monolitik zirkonya ... -
Farklı yöntemlerle üretilen metal alt yapılara kompozit rezin bağlantısı
Çağlar, İpek; Ateş, Sabit Melih; Arslan, Emel; Duymuş, Zeynep Yeşil (Atatürk Üniversitesi, 2021)Amaç: Bu çalışmanın amacı, konvansiyonel döküm ve direk metal lazer sinterleme (DMLS) tekniği ile elde edilen kobalt-krom (Co-Cr) alt yapıların kompozit rezin ile bağlantısının değerlendirilmesidir. Gereç ve yöntem: ... -
An in vitro evaluation of the effect of various adhesives and surface treatments on bond strength of resin cement to polyetheretherketone
Çağlar, İpek; Ateş, Sabit Melih; Duymuş, Zeynep Yeşil (Wiley, 2019)Purpose To investigate the effect of various surface pretreatments and adhesive systems on bond strength of resin cement to polyetheretherketone (PEEK). Materials and Methods 360 PEEK specimens were divided into 4 groups ... -
Inluence of toots preparation design on filling accuracy o CAD-CAM based restorations
Ateş, Sabit Melih; Duymuş, Zeynep Yeşil (Wiley-Blackwell, 2016)Objective: I he purpose ofthis study was to evaluate the marginal fit o d fferent zirconia and metal frameworks and compare them with each other on different finish line configurations. Materials and Methods: 20 stainless ... -
Lazer uygulamalarının protez kaide tamirinin dayanımına etkisi
Korkmaz, Fatih Mehmet; Bağış, Bora; Ayaz, Elif Aydoğan; Turgut, Sedanur; Ateş, Sabit Melih; Tüzüner, Tamer (2014)Amaç: Bu çalışmanın amacı, kumlama ve frezleme yapmadan önce değişik enerji seviyelerindeki Er;Cr;YSGG lazer uygulamasının otopolimerizan akrilin transvers dayanımına olan etkisini incelemektir. Gereç ve Yöntem: Toplam 70 ... -
Peel strength of denture liner to PMMA and polyamide: laser versus air-abrasion
Korkmaz, Fatih Mehmet; Bağış, Bora; Özcan, Mutlu; Durkan, Rukiye; Turgut, Sedanur; Ateş, Sabit Melih (Korean Acad Prosthodontics, 2013)PURPOSE. This study investigated the effect of laser parameters and air-abrasion on the peel strength of silicon-based soft denture liner to different denture resins. MATERIALS AND METHODS. Specimens (N=180) were prepared ...