Kurum Yazarı "Çağlar, İpek" DŞHF, Klinik Bilimler Bölümü Koleksiyonu İçin Listeleme
-
Artifact expression of polyetheretherketone in cone beam computed tomography: An in vitro study
Köse, Taha Emre; Günaçar, Dilara Nil; Ateş, Sabit Melih; Çağlar, İpek (Mosby-Elsevier, 2021)Statement of problem. Dental prosthetic materials can cause artifacts in cone beam computed tomography (CBCT) images, adversely affecting diagnostic quality, although the problem may be less with polyetheretherketone (PEEK). ... -
The effect of adjustment and finishing procedure on roughness, strength, and phase transformation of monolithic zirconia
Öztürk, Işıl; Çağlar, İpek; Duymus, Zeynep Yeşil (Springer, 2022)Objective To evaluate the effect of adjustment and finishing procedures and thermal aging of monolithic zirconia on the surface roughness, phase transformation, and flexural strength. Material and methods One hundred ... -
The effect of denture cleansers on surface roughness and bond strength of a denture base resin
Ateş, Sabit Melih; Çağlar, İpek; Özdoğan, Alper; Duymuş, Zeynep Yeşil (Taylor & Francis Ltd, 2017)Purpose: the purpose of this study was to evaluate the effect of different denture cleaning regimens on surface roughness of denture base material and bond strength to hard reline material.Materials and methods: 100 ... -
The effect of different surface pretreatments on the bond strength of veneering resin to polyetheretherketone
Ateş, Sabit Melih; Çağlar, İpek; Duymuş, Zeynep Yeşil (Taylor & Francis Ltd, 2018)The aim of this study was to investigate the effect of different surface pretreatment methods on the bond strength of veneering resin to polyetheretherketone (PEEK) based aesthetic frameworks. Five hundred and forty PEEK ... -
The effect of Er:YAG laser irradiation on the bond stability of self-etch adhesives at different dentin depths
Karadaş, Muhammet; Çağlar, İpek (Springer London Ltd, 2017)The aim of this study was to evaluate the effect of Er:YAG laser irradiation on the micro-shear bond strength of self-etch adhesives to the superficial dentin and the deep dentin before and after thermocycling. Superficial ... -
The effect of sandblasting, Er: YAG laser, and heat treatment on the mechanical properties of different zirconia cores
Çağlar, İpek; Yanıkoğlu, Nuran (Mary Ann Liebert, Inc, 2016)Objective: the purpose of this study was to evaluate the effect of surface and heat treatments on the mechanical properties and phase transformation of yttria-stabilized tetragonal zirconia (Y-TZP) materials. Background ... -
Effect of sandblasting, silica coating, and erbium: Yttrium-aluminum-garnet laser treatment on the shear bond strength of self-adhesive resin cement to alumina ceramics
Çağlar, İpek; Ateş, Sabit Melih; Boztoprak, Yalçın; Aslan, Yılmaz Umut; Duymuş, Zeynep Yeşil (Wolters Kluwer Medknow Publications, 2018)Objective: the aim of this study was to investigate the different surface treatments on the bond strength of self-adhesive resin cement to high-strength ceramic. Materials and Methods: Ninety aluminum oxide ceramic ... -
The effect of various polishing systems on surface roughness and phase transformation of monolithic zirconia
Çağlar, İpek; Ateş, Sabit Melih; Duymuş, Zeynep Yeşil (Korean Acad Prosthodontics, 2018)PURPOSE. the purpose of this study was to evaluate and compare three polishing systems on the surface roughness and phase transformation of monolithic zirconia. MATERIALS AND METHODS. 100 disk shaped specimens (10 mm ... -
The effect of veneering on the marginal fit of CAD/CAM-generated, copy-milled, and cast metal copings
Ateş, Sabit Melih; Duymuş, Zeynep Yeşil; Çağlar, İpek; Holoğlu, Bilal (Springer Heidelberg, 2017)This in vitro study investigated the marginal fit of metal and zirconia copings before and after veneering on dies with shoulder/chamfer (s/c) finish lines. Using CAD/CAM, ten (n = 10) each s/c zirconia (NZ) copings and ... -
Farklı bağlayıcı ajanlar uygulanmış lazer sinterize kobalt-krom alaşımına kompozit bağlantısının incelenmesi
Ateş, Sabit Melih; Çağlar, İpek; Duymuş, Zeynep Yeşil (Türkiye Klinikleri Yayınevi, 2021)Amaç: Bu çalışmanın amacı 4 farklı bağlayıcı ajan uygulanmış lazer sinterize kobalt-krom (Co-Cr) alaşımına akışkan kompozitin makaslama bağlantı dayanımını incelemektir. Gereç ve Yöntemler: Toplam 100 adet lazer sinterize ... -
Farklı enerji seviyelerindeki Er:YAG lazer ile tamir edilen akrilik kaide rezininin bükülme dayanımı
Ateş, Sabit Melih; Çağlar, İpek; Duymuş, Zeynep Yeşil (Selcuk Universitesi Dişhekimliği Fakültesi, 2021)Amaç: Konvansiyonel akrilik kaide rezininin tamirinde, tamir yüzeylerine uygulanan farklı enerji seviyelerindeki Er:YAG lazerin kaide rezininin bükülme dayanımına etkisini incelemektir. Gereç ve Yöntemler: 80 adet ... -
Farklı içeceklerde bekletilen monolitik zirkonyanın renk stabilitesinin incelenmesi
Duymuş, Zeynep Yeşil; Öztürk, Işıl; Çağlar, İpek; Ateş, Sabit Melih (Atatürk Üniversitesi, 2021)Amaç: Bu çalışmanın amacı, günlük hayatta sıklıkla tüketilen farklı içeceklerin monolitik zirkonyanın renk stabilitesine etkisini değerlendirmektir. Materyal ve Metod: Disk şeklinde (10x1.2 mm) 40 adet monolitik zirkonya ... -
Farklı yöntemlerle üretilen metal alt yapılara kompozit rezin bağlantısı
Çağlar, İpek; Ateş, Sabit Melih; Arslan, Emel; Duymuş, Zeynep Yeşil (Atatürk Üniversitesi, 2021)Amaç: Bu çalışmanın amacı, konvansiyonel döküm ve direk metal lazer sinterleme (DMLS) tekniği ile elde edilen kobalt-krom (Co-Cr) alt yapıların kompozit rezin ile bağlantısının değerlendirilmesidir. Gereç ve yöntem: ... -
An in vitro evaluation of the effect of various adhesives and surface treatments on bond strength of resin cement to polyetheretherketone
Çağlar, İpek; Ateş, Sabit Melih; Duymuş, Zeynep Yeşil (Wiley, 2019)Purpose To investigate the effect of various surface pretreatments and adhesive systems on bond strength of resin cement to polyetheretherketone (PEEK). Materials and Methods 360 PEEK specimens were divided into 4 groups ...