Yayıncı "Elsevier" Makine Mühendisliği Bölümü Koleksiyonu için listeleme
Toplam kayıt 63, listelenen: 1-20
-
Alumina and titanium nanoparticles to diesel–Guizotia abyssinica (L.) biodiesel blends on MFVCR engine performance and emissions
(Elsevier, 2024)Deteriorating air quality and diminishing fossil fuel reserves drive the demand for alternative fuels. Biodiesel from animal and plant sources appears promising, but it has drawbacks like lower thermal efficiency and higher ... -
Analysing the impact of insulating material properties on the thermal performance of a novel composite precast concrete walling system exposed to elevated temperatures
(Elsevier, 2023)The use of prefabricated elements is widely adopted in the construction sector to reduce the necessary on-site construction works and time, to maximise efficiency in material use and to mitigate on-site fabrication and ... -
Analysis of the benefits of adopting roof sandwich panels integrated with PCM versus PUR to mitigate energy costs and carbon dioxide emissions
(Elsevier, 2024)The construction industry's thirst for power has skyrocketed on a global scale. A significant amount of this power is used for buildings' heating, ventilation, and air-conditioning needs (HVAC systems), which in turn ensure ... -
ANN and CFD driven research on main performance characteristics of solar chimney power plants: Impact of chimney and collector angle
(Elsevier, 2024)Solar energy systems operate directly connected to the sun. Solar chimney power plants are privileged systems that can provide power output even in cloudy weather and during hours when there is no sun. The design and sizing ... -
Characterization of biodiesel based on plastic pyrolysis oil (PPO) and coconut oil: Performance and emission analysis using RSM-ANN approach
(Elsevier, 2023)The work presents comparative study of the production and characterisation of sustainable biodiesel fuel made from waste plastics and virgin coconut oil. For characterisation, various chemical tests were performed, including ... -
Combined influence of artificial nucleation site and expanding cross section on flow boiling performance of micro pin fins
(Elsevier, 2022)Present paper experimentally studies combined influence of artificial nucleation sites and expanding cross section on saturated flow boiling performance of heat sinks with micro pin fins. Thermal and visualization-based ... -
A comprehensive review on hydrogen production from coal gasification: Challenges and Opportunities
(Elsevier, 2021)This paper comparatively discusses hydrogen production options through coal gasification, including plasma methods, and evaluate them for practical applications. In this regard, it focuses on numerous aspects of hydrogen ... -
Cryogenic cooling-based sustainable machining
(Elsevier, 2020)Machinability is the most important indicator to measure the performance of any machining operation. Cutting force, surface roughness, tool wear, dimensional accuracy, and cutting temperature, etc. are the most important ... -
Current technologies for aluminum castings and their machinability
(Elsevier, 2021)Metal casting is one of the leading production techniques for three-dimensional parts in manufacturing industry. The casting process consists of many stages such as design, determination of chemical composition (alloying), ... -
Design, modelling, environmental, economic and performance analysis of parabolic trough solar collector (PTC) based cogeneration systems assisted by thermoelectric generators (TEGs)
(Elsevier, 2024)Concentrating solar power systems (CSP) is a very efficient technology for clean and renewable energy production. It basically works on the principle of focusing the sun's rays with the help of a reflective surface. There ... -
Dry cutting: A sustainable machining technology
(Elsevier, 2021)Conventional cutting fluids with flood cooling are used to reduce the heat generation during machining but at the cost of environmental degradation. The hydrocarbon-based conventional cutting fluids are harmful to the ... -
The effect of ABS fraction on the fatigue behavior of PMMA/ABS polymer blends
(Elsevier, 2022)This paper aims to examine the fatigue behavior of the Poly(methyl methacrylate)/ Acrylonitrile-butadiene-styrene (PMMA/ABS) polymer blends by means of experimental studies. For the material characterization of the blends, ... -
Effect of arc re-melting on microstructure, mechanical and tribological properties of commercial 390A alloy
(Elsevier, 2021)To investigate the effect of the arc re-melting on the microstructure, mechanical and tribological properties of the 390A alloy, its ingot produced by the conventional induction melting method was subjected to the arc ... -
Effect of double cross sectional ratio on performance characteristics of pulsating heat pipes
(Elsevier, 2021)Effect of double cross sectional ratio on performance characteristics of pulsating heat pipes is experimentally investigated. The cross sectional ratios in the evaporator and condenser sides are different from each other, ... -
Effect of fin width ratio on thermal performance of fin based-heat sink with phase change materials
(Elsevier, 2023)The rapid development of electronics, coupled with need of miniaturization in the design and manufacture, makes heat dissipation, which is critical for the performance, lifetime, and reliability of the components extremely ... -
Effect of gradually expanding flow passages on flow boiling of micro pin fin heat sinks
(Elsevier, 2022)In this paper, effect of gradually expanding flow passages on saturated flow boiling characteristics of micro pin fin heat sinks is experimentally investigated. In this regard, a comparative analysis is performed based on ... -
Effect of heat treatment on mechanical and wear properties of Zn-40Al-2Cu-2Si alloy
(Elsevier, 2021)In order to determine the effect of heat treatment on the mechanical and wear properties of Zn-40Al-2Cu-2Si alloy, different heat treatments including homogenization followed by air-cooling (H1), homogenization followed ... -
Effect of hexagonal boron nitride (h-BN) addition on friction behavior of low-steel composite brake pad material for railway applications
(Elsevier, 2021)In this study, low-steel composite friction materials containing different amount of h-BN were developed for railway vehicles. Addition of h-BN has no considerable effect on mechanical properties of the matrix structure. ... -
Effect of inlet temperature on flow boiling behavior of expanding micro-pin-fin type heat sinks
(Elsevier, 2023)Heat sinks that cool electronic systems through flow boiling are exposed to working fluids at different inlet temperature. Therefore, in the present study, influence of inlet temperature on boiling performance of a ... -
Effect of using hybrid nanofluids as a coolant on the thermal performance of portable thermoelectric refrigerators
(Elsevier, 2022)This study investigated the effect of using hybrid nanofluids as a refrigerant in portable thermoelectric refrigerator applications on thermal performance. For this purpose, a cooling cabinet with an internal volume of 36 ...